How to view 16-bit RGB information?

I'm using Photoshop CS4 v. 11.0. I open a .tif which is 16-bit RGB. Photoshop recognizes it as 16-bit. The tab over the picture says RGB/16*. (I don't understand the asterisk) Image>Mode confirms that it is 16 Bits/Channel.
However the info panel only shows the 8-bit RGB values (0,255). The panel options do not include a bit depth selection. How can I see the RGB values, perhaps (0,32767), in the .tif image using Photoshop?

Simple answer this one - In your info panel, there is a tiny eyedropper beside the RGB values. If you click, this it gives you various options. Including the ability to read 16 bit values.

Similar Messages

How to view specific assignment block information for opportunity

Hi everyone,
We have the following requirement from our users:
1) Users will specify a selection criteria to view only specific opportunities on the opportunity search screen
2) Users will then select multiple opportunities from the result list
3) Users want the ability to choose the specific assignment block information they want to view(opportunity header, sales team, partners etc)
4) We should then display this in some form so that only specific AB information is available to the users
As I am compartively new to the SAP world, I would really appreciate if some one could guide me here. Currently a solution is in place where users can launch a report which opens a new excel sheet which has information for about 7 assignment blocks(this is static and users cannot choose which ones they want). We essentially need a solution which can interact with our CRM system and give the users the ability to choose which AB information they want to view and then output this information in a printable format.
I have been told that we can use Crystal reports to accomplish this but I am not very sure as these are primarily analytics tools? It would be great if anyone can provide some pointers.
Regards,
Abhinav

Hello Madhusudan,
In your overview page controller you have to overwrite methods: DETACH_STATIC_OVW_VIEWS (this is where you remove your assignment block from the page dynamically), REATTACH_STATIC_OVW_VIEWS (this is where you can put your assignment block back on the page). Both methods have a returning parameter where you can specify which assignment block you want to detach/reattach.
Hope this helps.
Best Regards,
Yevgen

How to enter 16 bit RGB value?

I created a new blank file with 16 bit per channel mode.
I expect that RGB values would be three 16-bit numbers (0 to 65535) but when I try to manually enter a RGB value, each color is still 0 to 255. Why??

Obviously one cannot input in any RGB mode anything else
but integers 0...255 (in CS2).
The reason is probably this: besides special tests, a
higher resolution than 8bpc for input data is of no
practical value.
The range for 16bpc is not 0...2^16-1 but 0...2^15+1.
0 is mapped to 0, 128 to 16448 and 255 to 32768.
These values are shown in the InfoPalette by clicking
on the small triangle right to the eyedropper, followed
by choosing 16bpc.
Best regards --Gernot Hoffmann

How to view resolution (ppi/dpi) and bit depth of an image

Hello,
how can I check the native resolution (ppi/dpi) and bit depth of my image files (jpeg, dng and pef)?
If it is not possible in lighroom, is there a free app for Mac that makes this possible?
Thank you in advance!

I have used several different cameras, which probably have different native bit depths. I assume that Lr converts all RAW files to 16 bits, but the original/native bit depth still affects the quality, right? Therefore, it would be nice to be able to check the native bit depth of an image and e.g. compare it to an image with a different native bit depth.....
I know a little bit of detective work would solve the issue, but it
would be more convenient to be able to view native bit depth in
Lightroom, especially when dealing with multiple cameras, some of which
might have the option to use different bit depths, which would make the
matter significantly harder.
This
issue is certainly not critical and doesn't fit into my actual
workflow. As I stated in a previous post, I am simply curious and wan't
to learn, and I believe that being able to compare images with different
bit depths conveniently would be beneficial to my learning process.
Anyway,
I was simply checking if somebody happened to know a way to view bit
depth in Lr4, but I take it that it is not possible, and I can certainly
live with that.
Check the specifications of your camera to know at what bit depth it writes Raw files. If you have a camera in which the Raw bit depth can be changed the setting will probably be recorded in a section of the metadata called the Maker Notes (I don't believe the EXIF standard includes a field for this information). At any rate, LR displays only a small percentage of the EXIF data (only the most relevant fields) and none of the Maker Notes. To see a fuller elucidation of the metadata you will need a comprehensive EXIF reader like ExifTool.
However, the choices nowadays are usually 12 bit or 14 bit. I can assure you that you cannot visually see any difference between them, because both depths provide a multiplicity of possible tonal levels that is far beyond the limits of human vision - 4,096 levels for 12 bit and 16,384 for 14 bit. Even an 8 bit image with its (seemingly) paltry 256 possible levels is beyond the roughly 200 levels the eye can perceive. And as has been said, LR's internal calculations are done to 16 bit precision no matter what the input depth (although your monitor is probably not displaying the previews at more than 8 bit depth) and at export the RGB image can be written to a tiff or psd in 16 bit notation. The greater depth of 14 bit Raws can possibly (although not necessarily) act as a vehicle for greater DR which might be discerned as less noise in the darkest shadows, but this is not guaranteed and applies to only a few cameras.

How to view disk space information

How to view disk space information in CLI

Perhaps you can share the output for the command ipcheck.
You should get an output like:
esalab.cisco.com> ipcheck
Ipcheck Rev           1
Date                  Mon Jun 18 10:43:20 2012
Model                 C150
Platform               (8066)
MGA Version           Version: 7.5.2-014
Build Date            2012-03-06
Install Date          2012-05-03 08:36:10
Burn-in Date          Unknown
Serial No.            001D09F09F6B-7xxxxx1
BIOS Version          A02I
RAID Version          02
RAID Status           READY
RAID Type             1
RAID Chunk            Unknown
BMC Version           1.70
Disk 0
Disk 1
Disk 2
Disk 3
Disk 4                233GB Seagate ST3250620NS 3BKH at ata2-master SATA300
Disk 5
Disk 6                233GB Seagate ST3250620NS 3BKH at ata3-master SATA300
Disk 7
Disk Total            466GB
Root                  400MB 43%
Nextroot              400MB 42%
Var                   400MB 0%
Log                   54GB 16%
DB                    2GB 0%
Swap                  6GB
Mail Queue            10GB
RAM 1 A               512M ECC 667MHz
RAM 1 B               512M ECC 667MHz
RAM 2 A               512M ECC 667MHz
RAM 2 B               512M ECC 667MHz
RAM Total             2G
CPU 1                 D 2G 800FSB 0.5M Cache
PCI 1                 PCI-X 64-bit Empty
PCI 2                 PCI-e 8x Empty
NIC Data 1            00:xx:xx:xx:xx:6b, NetXtreme Gigabit Ethernet PCI Express (BCM5721)
NIC Data 2            00:xx:xx:xx:xx:6c, NetXtreme Gigabit Ethernet PCI Express (BCM5721)
PS1                   Unknown
PS2                   Unknown
Key                   1da, IronPort Anti-Spam
Key                   1da, Receiving
Key                   expire, Bounce Verification
Key                   expire, Central Mgmt
Key                   expire, Intelligent Multi-Scan
Key                   expire, IronPort Email Encryption
Key                   expire, IronPort Image Analysis
Key                   expire, McAfee
Key                   expire, Outbreak Filters
Key                   expire, RSA Email Data Loss Prevention
Key                   expire, Sophos
esalab.cisco.com>

When viewing a photo in full screen, how do I get the file information and data along the footer. How do i get that to go off? Preferences.....???

Love full screen view, but my file information and data are showing along the footer. How do I change me settings so this doesn't show?
Thanks!!!!

Anne, didn't the answers Frank and I gave in the other tread work? See:
Re: How do I turn of the focus points in Aperture when viewing a photo in a non-thumbnail view? Thanks!
Or did you want to know something differently?

How to get 64 bit version for premiere elements 12

How to get 64-bit version for Premier Elements 12 ?
I download from ADMISY site.
Click on win 64 bit and download it.
When I try to install ther is a error this download version is not for 64 bit I have try many times but same result

Hello
I have been away some days
ADMISY is a software partners for Adobe
I running Win 7 Home Edition
I have received a card with a code when I bought the program and the I
download from ADMISY
Sending serial and installation warning
PhotoshopElements_12_WWEFDJ.7z
PhotoshopElements_12_WWEFDJ
PremiereElements_12_WWEFDJ_win32.7z
PremiereElements_12_WWEFDJ_win32
I can not find a 64 bit version of 32-bit or 64-bit version of downloads
This is information I have
Best regards
Erling Magnusson
2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
How to get 64 bit version for premiere elements 12 created by A.T.
Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
Elements* - View the full discussion
<https://forums.adobe.com/message/7162950#7162950>

How can you cancel credit card information my sons trying to download free apps yet credit card info keeps popping up and he can't download the app! Plz help

Hi I got my son a I pad mini for his Christmas first he used I tunes card which was fine then I entered my bank details to download a game you pay for now because I've entered the bank details every time he try's to down load a free game it wontlethim get it as its asking for credit card information ,
Can somebody tell me how I can get it back to when he first got it and he could down load all the free apps. Without card information or how I can get the card information bit away thanks

Go to settings on your device then select app store. If you tap on the email that is shown it will give you an option to view your apple ID. When you are viewing your apple ID, tap on payment method and it will show a list of credit card options. The one at the bottom should say none. If you then tap none for payment options the credit card will not be connected. If you go on to the app store again you should be able to download free apps with out any issues.
Hope this helped!

How do I remove credit card information from iTunes account?

How do I remove credit card information from iTunes account?

If you have an unpaid balance or payment due, you can't select None as your payment type.
To see which order you need to pay for, view your purchase history.
When you sign in to the store, you may see a message that there was a billing issue with your last order.
Click the Billing Info button to see the order.

Is there anyway to view the purchase order information foreach transaction

hi sap techies
Currently the FAGLB03 does not display the vendor related information for transactions coming through as a goods receipts (transactions processed by receiving dept) and/or related to purchase orders. Is there anyway to view the purchase order information for each transaction? For example, we cannot see vendor code/name, po #, etc.

HEllo,
FAGLL03 displays information from the line items of the accounting documents. If the information you want to display exists in tables you can display. But if the information you want comes from other tables you cannot display.
As a workaround you can check the SAP note 1034354 which tells you how to add the offsetting accounting information and then you cna display some of the information you want. To do so you can create your own coding into a BADI implementation.
REgards,
REnan

I am trying to open a website that is using Microsoft content viewer, and the page does not show. Any ideas on how to view this site using firefox. It works on IE.

I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.

When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
You can read about PDF/A files in the Help.

HT5622 How do I delete credit card information ?

How do I delete credit card information from my apple account .... iPhone 5c

Delete credit card information with iOS - http://bongotbusy.blogspot.com/2011/09/hinthow-to-remove-iphoneipadipad2.html - Settings > Store > Apple ID > View Apple ID > Account > Edit Payment Information > Payment Card > None

How do I delete credit card information from my profile?

How do I delete credit card information from my profile? When I simply delete it, the system forces something to be in those fields. When I type random info in, it forces accurate info. I DON'T want to store credit card info.

To remove it from your account, tap on your id in Settings > iTunes & App Store and then tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page from where you can change remove/change your payment details.
Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information? - Apple Support

How do i remove my creditcard information from my account?

How do i remove my creditcard information from my apple id? I dont want allu purchases being subtracted from my card.

iTunes > Store > View My Account > Payment Information, set to None.
tt2

How can we retrieve the Payload information from B2B

Hello,
We are trying to send the payload information back to the client for a failed BPEL Transaction from B2B's b2b_instancemessage view. We are enqueing messages to IP_OUT_QUEUE using BPEL. We see the payload coming correctly in the B2B Business Message Reports. But we don't see the payload coming in the b2b_instancemessage view for failed B2B transactions. How can we see the payload in b2b_instancemessage view for failed B2B transactions as well? or How can we retrieve the Payload information from B2B?
Any help is greatly appreciated! Thanks. - Sam.
Edited by: user12049162 on Dec 4, 2009 2:04 PM

I am not sure about the PDK API to get the group name. But using LDAP API its easy to get the User Group.
If you find the answer to get the group name using PDK API, Please update in forum. It will really help others.
--Balaji S

How to view 16-bit RGB information?

Similar Messages

Maybe you are looking for