How to view a trace of SM49/SM69

Dear Experts,
this should be very easy for many of you... I had to determine, why brconnect was not starting
via a gateway on another host, I wanted to check the execution through SM49/SM69. As there
was very little output, I have noticed, that there is a trace check box at the right of the transaction
screen, but no option how to browse through the generated trace(s).
I was checking the generated dev_rfc files in the work directory, but was not able to find my trace.
How could I reliably browse the traces, generated for my run ?
Thanks in advance!

Hi Symon.
What exactly you want to do?
Describe you landscape. This is a distributed installation (DB and CI in different hosts)?
It is a Windows or Unix platform?
Sometimes ins Unix platform you may have an incorrect permission on Br* files after update/upgrade kernel. Check this note:
Problem Description: http://service.sap.com/sap/support/notes/651351
Adjust permissions: http://service.sap.com/sap/support/notes/113747
I hope this help.
regards,
Mauricio

Similar Messages

  • How to view the Syslog Application logs in CLI

    On CallManager 6.1.x, how do we view the Application Logs in the Syslog Viewer using the CLI?  I know how to view the traces but not the Application or System logs in CLI.  My RTMT to a customer is being blocked so I need to use the CLI.  Thanks.

    Event Viewer-Application Log = /var/log/active/syslog/CiscoSyslog.*
    Event Viewer-System Log = /var/log/active/syslog/messages.*
    From CLI:
    To list application logs:
    file list activelog syslog/CiscoSyslog.* date detail
    To list system logs:
    file list activelog syslog/messages.* date detail
    To view a specific application log:
    file view activelog syslog/CiscoSyslog.1
    To view a specific system log:
    file view activelog syslog/messages.1
    http://htluo.blogspot.com
    Michael

  • How to view the sql query?

    hi,
      how to view the sql query formed from the xml structure in the receiver jdbc?

    You can view SAP Note at
    http://service.sap.com/notes
    But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
    Reason and Prerequisites
    You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
    Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
    Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
    When you want to use a parameter documented here, please be aware to which category it belongs!
    Solution
    The following list shows all available parameters of category 1 or 2. Please note:
    Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
    Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
    The default value of a parameter is always chosen that it does not change the standard functionality
    JDBC Receiver Adapter Parameters
    1. Parameter name: "logSQLStatement"
                  Parameter type: boolean
                  Parameter value: true for any string value, false only for empty string
                  Parameter value default: false (empty String)
                  Available with: SP9
                  Category: 2
                  Description:
                  When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
                  This should be used only during the test phase and not in productive scenarios.
    Regards,
    Prateek

  • How to view process of outbound Adaptor

    Hi,
      I am doing file to idoc scenario. I want to see the
    status of message through "Outbound Adaptor" Monitoring.
    In this Monitoring 3 tabs are. There thy were...
    "Message Content",
    "Queue Monitor"
    "Outbound Adaptor"
       when I am logging into this it is not taking my User
    id. Then I tried with service user ids..even it is not
    taking. why it is not taking and how to view all this
    information?
    Thx,
    Ansar.

    Hi Ansar,
    Do you have the full logging and trace level in SXMB_ADM enabled.
    In  system the tracing is not enabled since it will occupy more memory . But you can turn it on and off in SXMB_ADM under the intergration engine configuration and press the help button to get all the parameters you can set.
    This might help you
    View Old Outbound docu in AE
    Regards
    Agasthuri Doss

  • Problem with view Log/Trace

    I have installed Peoplesoft 8.9 peopletools 8.49 and web logic 9.2 and tuxedo 9.1.
    I have installed everything succesfully.
    I have configured the Process scheduler successfully.
    In the reportnode(REP_NODE, the name i have given for the reporting node), i have set the URL as "http://localhost:8100/psreports/ps"( i don't know whether this is right or wrong. please let me know if that is wrong). and the URI Host as "SchedulerTransfer/ps" and URI port as 8100.
    Now i went to the servers link and selected the PSNT and went to the distribution tab and i have given the report node as REP_NODE.
    Maximum Transfer Retries as 3
    Interval for Transfer Attempt as 30 seconds
    Transfer System Files to Report Repository is checked.
    Now when run any process the the distribution status is going to "posted". but the files are getting transferred to C:\FSDMO but not to C:\psreports.
    when i click on the "Details" in the process monitor the "View Log/Trace" link is enabled and i go inside. i see the log files for that process.
    I have the Problem here. when i click that it NOT showing any data. that is my problem.
    Please tell me how to get my log files opened in "View Log/Trace" link .
    Thank you,
    Bye.

    Hi Nicolas, Thanks for you reply.
    What did you define in the configuration.properties file of your webserver for the parameter ReportRepositoryPath ?The ReportRepositoryPath is "c:\psreports"
    http://img84.imageshack.us/my.php?image=configurationpropertieszm6.jpg
    What is the URL of the link to the files (right click
    on the link, then properties) ?http://localhost:8100/psreports/ps/4165/AE_PSXPARCHATTR_5391.stdout
    "SchedulerTransfer/ps" is the URI resource.My bad, I gave "SchedulerTransfer/ps" under URI resource NOT in URI host. i just typed it wrong.
    http://img501.imageshack.us/my.php?image=reportnodevf6.jpg
    Are you connected with a URL as
    http://localhost:8100/psp/ps/... ?
    yes, i connect to peoplesoft this way.
    if the image is not clear, just click on the image once.
    Do we need to reboot app server/web server after we change something to the report node.(people tools -> process schedulet -> report nodes.
    Thank you,
    Bye.
    Message was edited by:
    user609854

  • How to view the process template of the instance

    Some of the workflow tools ( for ex: MQ Workflow) provide a way to see the design of the process template graphically. When an instance is created out of the process template, user can see the process stops of the instance graphically. While one could see on EM Flow trace of the instance, it only shows the steps so far completed. I am unable to know what stop I am at in the complete flow of the process map. May be I am missing something, but if you can point me in right direction how to view the stages of a process instance ( completed and yet to be completed) I rellay appreciate.

    What about this?
    SELECT pid
      FROM v$session s, v$process p
    WHERE p.addr = s.paddr
       AND s.sid = :sid;   -- replace :sid with your session idRegards.
    Al

  • How to view executed sql history?

    I have encountered some strange errors in my productive database. I want to view the sql execution logs. but I don't know how to view it. is there any good methods to check the sql execution history?

    The core dump trace file will have information you need for troubleshooting. Most of time including the SQL that caused the problem if it was caused by certain SQL.
    Check your core dump destination. Core dump is not usual in Oracle operation, it's worth to submit a SR .

  • How to view SOAP header generated from XML Gateway  ?

    Hi All,
    I am using XML Gateway integrate EBS and trading partner using web services.
    Currently I am having problem with including wsse authorization information in the outbound message of EBS.
    I am able to view the payload in the transaction monitor but not able to check the SOAP header of message.
    How to view the current SOAP header generated by EBS and/or include the wsse information which are required by recipient trading partners ?
    Thanks in advance for your help.
    Regards,
    Ram

    No, this XML is the whole XI message and it is not sent by the SOAP (axis) adapter. If you want to see exactly what is sent, try checking it with the TCPGateway tool as advised on the SOAP FAQ note
    [Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=856597]
    Under question "Q: How can I trace the whole message?". Otherwise, on SXMB_MONI, try selecting the PAYLOAD item on the left menu and, on the payload on the right, right-click and select "VIEW SOURCE".

  • How to view local videos on iOS mobile device

    How do I view local videos on my iOS device running an Adobe Air app? I know how to view the CameraRoll for iOS in Flex on Adobe Air, but the CameraRoll class only brings up photos, no videos.  When I use:
    if (CameraRoll.supportsBrowseForImage) {
                                                      var roll:CameraRoll = new CameraRoll();
                                                      roll.browseForImage();
                                            } else {
      trace("Camera Browsing not available");
    The cameraRoll instance that is brought up only shows photos, no videos.  Any ideas?

    +1  I need this as well.
    It looks like it's simply not available in CameraRoll - is support planned?  What are other possibilities - File?  Navtive extension?
    Would AIR even be able to play typical phone video formats?  From a quick search, it seems that the iPhone captures h.264 in a mov container, while at least one Android phone captures MPEG-4 in a 3gp container.  I'll try transferring such videos to my computer and embedding them in a test app just to see if they play.
    Thanks for any insight!
    ETA: The docs for NetStream list h.264 and 3gp as supported formats.  From my testing, however, NetStream does play the iPhone .mov file, but does not play the Android .3gp file.  A Loader plays neither.

  • Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

    Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
    == This happened ==
    Every time Firefox opened
    == I tried to update firefox add-ons ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Try a new profile. See [[Recovering important data from an old profile]]

  • Bridge - How to view image in full screen resolution

    In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?

    The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge.  Maybe I am not following you.  Sorry

  • How to View the Loaded Data

    Hi,
    I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
    Thanks

    Hi Madhu,
    You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
    Regards
    Hemant

  • How to view my macbook pro retina on a iMac late 2009?

    How to view my Macbook Pro Retina on a late 2009 27" iMac? Note: Mini DisplayPort won't fit.

    Hi rainson,
    Here is a list of video adapters and the Mac models they can be used with:
    About Apple video adapters and cables
    http://support.apple.com/kb/ht3235
    This article describes Target Display Mode, which may also be useful for what you are trying to do:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Cheers!
    - Ari

  • I am trying to open a website that is using Microsoft content viewer, and the page does not show. Any ideas on how to view this site using firefox. It works on IE.

    I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.

    When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
    For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
    You can read about PDF/A files in the Help.

  • How to view errors if bulk collect has thrown errors

    Hi,
    I have few questions.
    1.How to view error whether bulk collect is successful or not
    2.What is identified & unidentified relationships in ERWIN
    3.How to see the errors whether the sql loder is successful or not
    and how to open the log file.Is there any specific command in UNIX
    which tells loader is successful or thrown error
    4.When executing the pl/sql procedure from UNIX.how to check for errors.
    Please provide the answers for this
    Thanks

    Use SAVE EXCEPTIONS clause in your FORALL loop.
    Is this for homework/test?

Maybe you are looking for