How to view a windows external hard drive on a mac?

I have this windows xp laptop with an external hd attached to it. I want to be able to view and edit the files on that hard drive from my macbook over my wireless home network. How do I do this? How can I mount the hard drive on my macbook?

Yes, an NTFS driver for MacOS is an option, but since the OP asked to do this over his wireless network, then your answer would not work, as they would need to unplug the drive from the XP system and connect it to the Mac (after downloading and installing the driver you referenced). The solution I gave allows them to read/write the NTFS drive without downloading or installing anything that they don't already have on their Mac (or PC).

Similar Messages

How to view Macintosh HD & External Hard Drive in Windows

Hi,
I can connect my PC and MAC & i can see my "C Hard drive" in MAC. But when i connect to MAC through PC(Win XP), I can see folder of my MAC username, i can also see the Desktop Files & Folder, but I can't see the "Macintosh HD" or External Hard Drive Folder.
Is anybody help me so i can view(also change) "Macintosh HD" and External HDD contents in my Win XP PC.
I appreciate your support.
- Kal
Mac G5 Mac OS X (10.4.9)
Mac G5 Mac OS X (10.4.9)

Hi.
To do that, I think you need Sharepoints.
Good Luck.
MacMini G4 1.25GHz 1GB Mac OS X (10.4.9)

How can I use my external hard drive on my mac and a windows computer?

Hello,
Can anyone help...I have recently purchased a new external hard drive for my macbook pro, it is a 1TB hard drive. I use it for time machine back ups which only takes up about 250gb of space so obviously I have a lot more to use. I'm at University and the computers there are Windows so I'm hoping to be able to drag my uni work to my external HD and connect it to the windows computers at my university so that I have my work there as well - however I'm not sure how I should format my HD???
Thanks

You will eventually use all of that 1TB external for the Time Machine backups, that is if you do regular Time Machine backups (It is NOT a One Time thing). So using that same external for anything else is not a good idea.
You would be much better off buying a large USB thumb drive, like 64GBs in size, and format that to one of the Windows formates that both Mac OS X and Windows can read from and write to. Those would be FAT32 and exFAT. If you are moving file less than 4GBs in size then format it FAT32. You can then copy files to it from your Mac and Read those files on the Windows PCs the school has and just stick that Thumb drive in your pocket.

How do I format an external hard drive to be Mac OS Extended (Journaled)?

I am in Disc Utilities, but I can't figure out how to format my external drive. It is at 0, ready to go... Just need the steps...
Thanks,
Ham

Hi(Bonjour)!
The following process will erase everything on your external HD and reformat it to Mac OS journaled partition.
1) open disk utilities application.
2) click your external hard drive's name in the left column.
3) select the "erase" tab in right.
4) select "Mac OS X extended journalized" in local menu.
5) click "erase button".
Formatting a 250 Gig hd can take much than one hour...
Michel Boissonneault

How do I share an external hard drive with 3 macs

On my gmac, I have an external hard drive that all my itunes music/videos are being saved to. I would like to give the other macs access to the itunes music but can not seem to network it. I have no problem logging on to any of the three computers and sharing/using folders from each mac but I can not get the other two computers to see my external hard drive. I tried using SharePoints but the issue seems to be that the external hard drive shows up at the "computer" level, whereas the networking shows up at the internal hard drive level. I've searched all over the boards but can't seem to find anything that helps me with this particular situation. I am using a SeaGate external hard drive that is formated as FAT32.

Highlight the Share in Sharepoints>Normal Shares tab. Look down & right for the Windows (SMB) sharing and change it Shared(+). Click Update Share, Share should now show a + under SMB & AFS. Click the Little Show File System Properties button, set users & group, Permission, etc.,Update Share.
That's the basics.

How do you use an external hard drive for your Mac (movies only), iTunes and Apple TV2 all together? I can't put movies on internal HD as it would use it all up.

any help is appreciated

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to an external drive (Mac)
Moving your iTunes library to an external drive (PC)

How do i format an external hard drive for use on both windows and mac book air?

how do i format an external hard drive for use on both windows pc and mac book air?

Use exFAT on the PC.
(71374)

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please help

Hi Allen,
Is there any way to store the back up to Mac and restore after formating?

How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

OK. Start with:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

How can I erase my external hard drive?

So I've been having this problem for a while now. Here's my setup: Macbook OS X 10.5.8 and a WD 10EAVS 1TB External Hard Drive. That's all. I was given this by a fellow student on campus who was graduating. So I want to use this to store my iTunes Library (my Macbook's hard drive ran out of space). Here's what I do:
- Macbook is turned on and running
- I plug the external hard drive into a working outlet --> Hard drive turns on
- I plug the external hard drive into the mac using a USB connection --> Disk Insertion Error message: the disk you insterted was not readable by this computer
- It is not readable so I open it in Disk Utility (the hard drive is listed/recognized)
- I attempt to erase and/or partition the hard drive in order to format it in Mac OS Extended OR Mac OS Extended (Journaled), but I get one of these two messages: "Disk Erase failed with the error: File system formatter failed." OR "Disk Erase failed with the error: The underlying task reported failure on exit."
I attempted to look up what these mean or how to fix the problem but nothing is really working. I was able to format the hardware line to MS-DOS (FAT) and the sub-line as Mac OS Extended (Journaled) but I don't even know if that's right or not.
Basically, I need my computer to recognize this hard drive whenever I plug it in and to run smoothly as "extra space" to store my music on.
I haven't had A LOT of experience with external hard drives but enough to get things done. But this problem is a killer.
Any help would be greatly appreciated!
Please don't hesitate to ask for more info in order to figure it out. I'll do my best with the knowledge/information I have
Thanks so much!

Read carefully to the end, it is not a long text.
Let us resume the required steps, after putting inside a new, virgin disk:
1. Start up machine and as soon as possible put CD/DVD, press key C to force boot from CD; if the sequence is not fast enough and machine passed over the initial phase, and ? was displayed, force shut down by pressing button key, then start again, with CD/DVD inside
2. Press key C after start, and wait until the Apple logo in displayed, wait
3. You will see a list of install language, choose one, and
4. Go to Apple bar and choose Disk Utility; on the left side, you will see the disk, select it, then, on the cenral-lower part of displayed windows go to Options and choose Apple Partition Map (APM), go back and choose, if not already chosen by default, Mac OS Extended Journaled (HFS+), 1 partition (or more, some prefer more than one), click to partiion/erase disk. Note that you MUST have both conditions achieved: APM and HFS+
5. Close Disk Utility and revert to installation proper, proceed.
If you do not see the disk on the left side of Disk Utility, then disk is damaged or badly connected.
P.S. The same procedures are applied to any disk, with the note that:
- for Intel Macs, partition map should be GUID, not APM
- for external disks or flash drives intended to smoothly work with Windows, format should be FAT 32 and Master Boot Record; NTFS may be done with an additional utility like NTFS-3G or NTFSmounter

HT3500 how do you transfer data from an external hard drive to a mac time capsule

I am trying to use my Mac Time Capsule as a wireless external hard drive for my MacBook Pro, so how do I transfer the data from a toshiba external hard drive, to my Mac Time Capsule?

Drag and drop or copy and paste files just as you would do with any normal Finder operation.
The Time Capsule is located under the SHARED heading in the Finder.
Click on the Time Capsule icon and double click the folder that appears representing the drive....named Data....unless you have changed the name......to mount the drive on the desktop.
Drag/drop or copy/paste files to the icon on the desktop or to the open window there.

How do I reformat my External Hard Drive (Seagate Backup Plus).

Hello everyone. How do I reformat my External Hard Drive (Seagate Backup Plus Portable Device). I accidentally clicked to use it with Time Machine and my hard drive is of little use now. When I open my hard drive, it just shows 'backup', the same thing when I open it with Windows. Thinking of reformatting it back to be used to Mac and Windows. And not use it again with Time Machine. New to Apple, appreciate the help

Hello,
"Thinking of reformatting it back to be used to Mac and Windows. And not use it again with Time Machine"
If you want to format the External drive as universally compatible, your best bet is to format it as exFAT. Note that reformatting the drive erases all contents of the drive.
1) Open Disk Utility located in /Applications/Utilities/ (or simply type it in spotlight and the application will show up)
2) Select the external Hard drive
3) Click the 'erase' tab.
4) Under format: select exFAT
5) Click "Erase" in the lower right hand corner to reformat the drive.

HT2426 how do i access my external hard drive connected to my time capsule 4th gen

how do i acess my external hard drive (wd) that is connected to my time capsule using a macbook pro?

Make sure that the drive has been formatted correctly to work with the Time Capsule.
That means a format of Mac OS Extended (Journaled)....highly recommended.....or FAT32.
Once this is checked, open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Disks tab at the top of the screen
If the USB port on the Time Capsule can supply enough power to the hard drive, you will see the name of the drive displayed in the window, per the example below:
If you have the correct format on the drive, and it does not appear, this is an indication that the USB port on the Time Capsule (which is under powered), does not have enough power to work with your hard drive.......even if the hard drive has its own power supply.
In this case, you will need to use a powered USB hub with the Time Capsule to provide enough current for the hard drive.
Now you should be able to access the drive using the Finder to mount it on the desktop.

How to export photo to external hard drive? (time capsule 3t)?

cant find photo in hard drive. where does iphoto store photo? i looked for the foler everwhere....

how to export photo to external hard drive? (time capsule 3t)?
Simple - launch iPhoto, select the phtoos and export (file menu ==> export) to the destination of yoru choice - see the user tip onexporting for details on the export optiopns - https://discussions.apple.com/community/ilife/iphoto?view=documents
However is the Time Capsule being used for Time Machine backups? If it is do not use it as an external drive too - it needs to be dedicated to one use only
cant find photo in hard drive. where does iphoto store photo? i looked for the foler everwhere....
And this is a totally different question - by default in your iPhoto library - and to access then see the user tip on accessing yoru iPhoto files - https://discussions.apple.com/community/ilife/iphoto?view=documents
You never access them directly - always using the supported access methods
LN

How can a format an external hard drive to Fat 32 format

how can i format an external hard drive to a Fat 32

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS (FAT) Click on the Partition button and wait until the process has completed.

How to view a windows external hard drive on a mac?

Similar Messages

Maybe you are looking for