How to view and edit videos made with Vixia HF R300 on my computer

I downloaded all the software that came with the camcorder. And impoted the videos. I cannot play the videos on the computer. Is there software that should have came with the camcorder that would allow me to view and edit the video? Thanks

Hi Brianpucci,
For the best answer, I recommend calling Pixela for assistance. Here's their contact information:
Telephone support: 1-800-458-4029 Monday-Friday 9:00 a.m. - 6:00 p.m. (PST)
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to view and edit local contacts

Hi there,
I recently got my Z10 and I cannot find how to view and edit a local contacts on my phone. I've imported all my contacts from a SIM card, but only SIM card's contacts are displayed when I choose All Contacts.
I would like to have view of the local contacts, becasue local contacts don't have limitations regarding amount of characters in the contact name which I want to edit.
Can anyone help with this ?
Michael

qualxarnu wrote:
Hi there,
I recently got my Z10 and I cannot find how to view and edit a local contacts on my phone. I've imported all my contacts from a SIM card, but only SIM card's contacts are displayed when I choose All Contacts.
I would like to have view of the local contacts, becasue local contacts don't have limitations regarding amount of characters in the contact name which I want to edit.
Can anyone help with this ?
Michael
in your contacts settings, turn OFF all contact accounts (SIM, BBM ETC) then afterwards you should be able to just see your local contacts.
Want to contract me? You can follow me on Twitter @RobGambino
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How to view and edit standard HTML tamplet

Hi All,
How can i view and edit standard tamplet?
Requirement is to hide some text , buttons and fields in SRM SC screen.
The Internet Service is BBPSC01
and HTML template is SAPLBBP_SC_UI_ITS .
Regards,
Anubhav

Hi Anubhav,
You can edit the template via SE80 -> Internet Service -> BBPSC01.
Then you can navigate to the specific HTML template (SAPLBBP_SC_UI_ITS).
After saving the template you need to publish it again.
Before editing the Standard template, please make a copy of the content to avoid syntax errors due possible changes!
I hope this information helps.
Regards,
Cristiano

How to view and print xps documents with Safari

Is there a way to view and print Microsoft *.xps using Safari?

xps is a Microsoft Proprietary format. There is a third-party viewer app, but I don't know how well it works or if it is compatible with Lion: http://www.nixps.com/index.html

How to view and edit .md file (text file) via Documents To Go app

Could some one please let me know how to view a text file with .md as the file extension using Documents To Go app? If this is impossible, which app do you recommend.
.md is a markdown file

Hi,
I believe I have my answer now, or at least a good thread on the subject going hear:
http://forums.java.net/jive/thread.jspa?threadID=45148
Thanks,
Mark

How to open and edit "*.txt" file with "Notepad"

Hello guys!
I'm facing problem with SharePoint 2010 Enterprise and got no clue how to solve it.
What I want to do is to open "*.txt" (which is placed to "Documents Library") in "Notepad", so I could edit it and save (publish) directly to SharePoint from "Notepad".
If I upload any Microsoft office File, such as "*.docx", "*.xls", etc - it works as it should - document opens in appropriate application and everybody is happy.
But, when I create documents library, put some "*.txt" file there and click on it - it opens in new browser's tab as text, so I cannot edit the file.
What I tried to do is to activate feature "Open Documents in Client Applications by Default" - not happy.
Edit "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML\DOCICON.XML" - I've modified "txt" entry as follows:
<?xml version="1.0" encoding="utf-8"?>
<DocIcons>
    <ByProgID>
    </ByProgID>
    <ByExtension>
<Mapping Key="txt" Value="ictxt.gif" EditText="Notepad" OpenControl="SharePoint.OpenDocuments"/>
    </ByExtension>
    <Default>
        <Mapping Value="icgen.gif"/>
    </Default>
</DocIcons>
Still not happy.
So, how do I make this stuff work?

Found this link which has more information on this scenario:
http://sharepoint.stackexchange.com/questions/1427/open-txt-file-in-notepad-from-sharepoint
A programmatic workaround:
http://weblogs.asp.net/bsimser/archive/2005/01/24/359911.aspx
Andrew Milsark, MCITP,MCTS
Fpweb.net - The SharePoint Hosting Pioneer
Blog : http://blog.fpweb.net
Twitter : http://www.twitter.com/amilsark

Downloading and editing video footage with different audio channels

Hi out there, I usually created photo montages in my iMovie & iDVD, but I have been given the task to edit an event and I believe that there might be an hour to 2 hours of footage. What I would like to know is, how do I focus on the wireless audio when needed and then use the regular audio at other times. I am about to download the footage and would like to make sure that I download it properly and then be able to use the audio as I see fit... ( will I even be able to use the different audio channels) I hope that I am making sense, any suggestions?! THANKS!

The "baked in" audio which is part of the video will sit "inside" the video clips. That audio can be faded up and down as needed.
You'll need to separately import your "wireless" audio if it was recorded onto a separate device such as a mini-disc recorder or somesuch, and it'll then sit in one of the two separate audio tracks. You can also fade that up and down as needed.
IF, however, the "wireless" audio was recorded straight into the camera, via a wireless receiver attached to the cam, then that'll also come in as part of the normal video (see 1st paragraph, above).
So - in that case - to "unravel" or separate the camera's own and the "wireless" audio will only be possible if they were each mono signals, recorded separately to the left and right channels of the camcorder's single stereo track, e.g; camera's mike on left channel, additional "wireless" audio on right channel.
If this was a professional camcorder, like a Canon XLH1, into which you can feed 4 channels at recording time, you won't be able to separate those two pairs of stereo after importing into iMovie, unless you import them separately ..e.g; camera Channels 1 & 2 as an integral part of the video import, and then Channels 3 & 4 imported separately afterwards, into one of the separate audio tracks.
iMovie has no way of separating audio - apart from left and right stereo channels which can easily be done in GarageBand ..or in another external audio editor program. There's no way to "unbake" 4 separate channels of audio within a video clip and to separate them once the video's been imported ..when all audio then appears as simply left and right channels of a stereo signal. You can extract audio from a clip, but you can't separate individual components of the audio, apart from prising apart the left and right channels, no matter how many audio tracks are available ..such as the two extra tracks in iMovie.
You don't say (a) which camcorder(s) had been used for shooting the material, and (b) whether the "wireless" recording was fed into the camera, or was recorded separately.
If you provide further exact details I may be able to help more..

How to view and edit raw images from Nikon d610?

Just bought a Nikon D610 and was surprised that the raw images are not supported by Aperture. Thought they would be the same as the D600. Any easy way to fix this?

Any easy way to fix this?
Not really.
You might import raw+jpeg pairs, while you are waiting for the raw support, and set Aperture to use the jpeg as original file. That can be switched back later. Or import only the jpeg, but keep the raw on the card and add them later.
Another possibility - use te software that came with your camera to develope the raw and import tiffs to Aperture, or use Adobe's dng converter to convert the raw to dng and work with the dng files.
Léonie

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
I have PremierePro-CS5 installed.
This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
This format is already compatible with Bluray3D stereoscopic format.
1) But, how to edit the .MVC in Premiere?
2) What plugin should I use (if exists) for PremiereProCS5?
3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
Thanks!
Horsepower0171.

Sorry, I am Italian, it is very difficult for me to understand what he says!
I can just read the english text, or follow the actions of a videotutorial!
Thus my question is the same:
-What software can do that?
-Sony Vegas 10 do the Bluray3D authoring?
-For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

I have a new Sony alpha 77ii. My PS version is 5.0. When I open the files in Bridge, they are .ARW files. How do I convert them to JPEG's so I can view and edit them?

I have a new Sony alpha 77ii. My PS version is 5.0. When I open the files with Bridge they are .ARW files. How do I convert them to JPEG's or something I can view and edit?

You can use Adobe's free DNG converter to convert proprietary raws to the universal DNG raw format. Here are the links:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 9.0
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 9.0
Converting to JPEG will be an extra step afterwards.
Benjamin

Hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

How can I view and upload videos to shared photos streams on mac

I use shared photo streams alot how can I view videos uploaded to a shared photo stream on my mac

You can not at this time - tha tis only an IOS 7 and PC feature today - mayber with future software releases
http://support.apple.com/kb/TS4379?viewlocale=en_US&locale=en_US
What software versions do I need to be able view and share videos, and contribute to other people's shared streams?
iPhone, iPad, or iPod touch with iOS 7.0 or later
PC with Windows 7 or later and the iCloud Control Panel 3.0 or later
AppleTV (second generation) with Apple TV Software Update 6.0 or later
If the owner of the shared stream has turned on the Public Website option and shares the link with you, you will be able to view videos and see photos and video added by all contributors from any up-to-date browser.
LN

How to convert and edit HD video

Because of the widely using of HD Camcorder, now it is really convenient to record family parties and other things you are interested in. Nowadays, people would like to share their things with the rest of the world through Internet, such as youtube.com and other video websites.
This guide aims to show you how to convert and edit the video you recorded using your HD camcorder
What you need is a powerful HD Converter.
Step 1: Load Video
Click “Add File” to load the video that you want to convert.
Step 2: Choose Your Output Profile and Settings.
From “Profile” drop-down list you can choose your output profile according to your need.
You can also click “setteing”adjust the settings of your output video, such as “video/audio encoder”, “Video/audio Bitrate”, “Channels”, “Resolution” and so on..
Step 3: Video Editing.
This powerful MTS Converter allows you to do many video editings.
1. Click "Effect". to make special effect for your movie.
You can adjust the “Brightness”, “Contrast”, “Saturation” and also you can use “deinterlacing” to improve you output effect.
2. Trim: .
“Trim” function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.
3: Crop: .
Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.
Step 4: Conversion.
After you have done all the steps above you can click “Start” button to start your conversion.
Here I also recommend you some High Definition video converter, MTS Converter, M2TS Converter.
Hulu Downloader
Total Video Converter
Best DVD Ripper

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How do you view and edit Siri relationships

SEt up relationship with Siri but find it does not work for me. How do you view and edit, delete relationships?

Just say bla bla bla is my bla bla bla. Ex:
Hey Siri, Judy Applewood is my Sister
About Siri

How to view and edit videos made with Vixia HF R300 on my computer

Similar Messages

Maybe you are looking for