How to view and use an xsl page in apache tomcat

how to view and use an xsl page in apache tomcat do i need to configure
certain files if yes what are they?
thanks

actually how do i embed xsl code into jsp and display it at localhost
do i need to do any configuration before i can view the page

Similar Messages

How to retrieve and use an XSL file from CLOB field

I am using Java to query my data and return XML formatted data. I am able to format this data using an XSLStylesheet file. But I want to instead use an XSL Stylesheet stored in a clob field.
I have an XSL file stored in a clob field. How can I retrieve and use it to initialize an XMLDocument and then create an XSLStylesheet.
Thanks for your help,
Les Smith

I think this question has been raised before. Try searching this forum.

How to view and use files on macbook

I want to access and work on files from my macbook pro on my i-mac, how do i do this?

http://lifehacker.com/5808814/how-to-share-a-folder-over-your-network-for-beginn ers
http://www.dummies.com/how-to/content/sharing-a-folder-in-mac-os-x-lion.html
more
mac setup shared folder

How can i stop firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages

How can i stop Firefox from asking "Choose A Network Connection" when i'm offline and using my saved pages
i use Firefox 22.0 on windows 7
it's about one week that it ask for "Network Connections" when i'm offline and disconnected from the internet even when i don't open a save page and just opening Firefox with a blank page
Image of the Error:
http://home.sums.ac.ir/~rowshansh/firefox.png
http://www.sums.ac.ir/~rowshansh/firefox.png

Did you check the network setting?
Sounds that you have set to connect automatically when a connection is not available.
*http://kb.mozillazine.org/Autoconnect
*http://kb.mozillazine.org/Browser_attempts_to_connect_when_already_connected

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

Can I import HTMLs from inside the project and use as portlet page ?

As you know, I am using Java Studio Creator 2 Update 1 for my current portal project. I have created JSR-168 JSF Portlet Project for my portlet development.
As I have some html pages ready for my development,
Can I import HTMLs from inside the project and use as portlet page for my project?
I did the followings steps:
1: In side the project - File -> Add Existing Item -> Web Page ( imported test.html page from my local folder)
2: Let it convert some of the tags for me ( so now it becomes - �test.jsp� )
3: Set it to initial view.
4. A default portlet page � newPortletPage.jsp is still there with no initial view.
Now after doing this, No Visual Designer and Properties window available to for that �test.jsp� page. Though it allowed me to �build� the project successfully.
When I build and run the portlet application, got the error message �Error occurred in portlet!� on Pluto Portal. Please advice.

You do not open fcpproject files. You don't double click or anything else. The files have to be in the correct folder structure in the Final Cut Projects folder and the application opens them automatically. Can you post screen shots of the Final Cut Projects folder and its location.

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Formication : How to install and use it

Hi,
I need some help. I would like to install and use the Formication CGI but I don't find any documentation usable for someone who never installed any CGI
Does someone use it and can teach me how to install and use it ? Or maybe there is a documentation somewhere ?
Thanks for any help

>I thought it was something well known here.
I'd never heard of it before.
Find here the message from the Mac OS X Server Mailing list where I found it.
Hi all..
We are currently moving: from WebStar / Lasso 6.x / FMS 5.5 to
Mac OSX Server / Apache / Lasso.850 / FMSA 8.
On our WebStar webserver we used FlexMail to handle e-mails sent from a
html-form, unless we wanted databases/Lasso to get involved.
I understand FlexMail cannot be used on Apache so I have been looking around
and searched the list for any tool to do the same job.
--> What tool to send e-mails directly from web-forms
with a reasonable option to format the e-mail and
generate a response page.
Henning, most of the people that transition from WebSTAR to iTools Apache use Formication.
Formication is a Perl version of Flexmail, so it has all the features of Flexmail, plus more. It was designed by one of the developers of the original Flexmail.
When you convert from WebSTAR to Apache you can keep your script intact.
With iTools, all you need to do is to add the action:
Flexmail /cgi-bin/formication.pl
and the .flx handler,
and the scripts run unchanged.
>I also found that there is an invisible file
inside. It's a .htaccess file
I'd totally missed that, and it's likely to be the
critical link.
yes... I supposed it was something important but.... well hidden...
By default, as shipped by Apple, .htaccess files are
ignored. You need to explicity enable then in
/etc/httpd/httpd.conf
Both 'Action' and 'AddHandler' (the two directives in
the .htaccess file) require FileInfo override for the
directory. Therefore, at the very least you need to
add:
<pre class=command><Directory /path/to/your/form>
AllowOverride FileInfo
Directory></pre>
to your httpd.conf so that apache will read the
.htacess file.
Alternatively, since you have to edit httpd.conf
anyway, you might just want to add those directives
to the <Directory> block, which will save Apache
having to read the file each time the form is used.
Thanks a lot Camelot,

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to design and use tabstrip in webdynpro

hi,
i trying to design tabstrip in webdynpro(SE80), i dont know how to design and use it. if u have screenshot or any other document give me. its pretty useful for my requirment. guide me

Hi Saravanan,
In your view, you have to add the UI element TabStrip. You will have an empty tab strip then. Right click on the tab strip, and add a 'Tab'. Continue in this manner to add as many tabs as you want. Each tab will have a header, specify the tab title in that.
Now go to each tab, right click and insert element. You could insert any element like a table, Input fields etc. Event handling has to be done separately for these elements. At the tabstrip level, you need to handle only the onTabSelect event. This is the event triggered when you change tab selection in the tabstirp. In the properties of the tab strip, there will be a field selectedTab. Specify the ID of the tab which you want as selected. This will be your initial selection.
You can also enable and disable tabs, say grey out tabs that have no data etc. All this can be done by context attribute binding.
You can also refer to the view by name TABSTRIP in the component WDR_TEST_EVENTS.
Regards,
Uday

How do you find out how many views and downloads a podcast has had?

How do you find out how many views and downloads a podcast has had?

Your question may be better placed in the "Producing Podcasts" forum instead of here in iTunes for Windows.
I assume though (I don't produce Podcasts), that the host server (where the Podcast is downloaded from) has the option of providing that information to the Podcast's producers.
Two points though;
That information is likely to only be available to the producers of that Podcast, not to listeners (or competitors)
It's almost certainly an add-on service, that needs to be paid for, in addition to the hosting service.
If it's your Podcast, check with the host service that you use.

How to view and print pdf files

how to view and print pdf files

Download and install Adobe Reader: Adobe Reader Install for all versions
Open the PDF file using it. If security restrictions don't prevent it you could also print it.

How can detect and remove scanned white pages in an OCRd pdf file?

How can detect and remove scanned white pages in an OCRd pdf file?

Acrobat does not support an automated way of doing this directly. You can
remove completely blank pages (pages that don't have any "marking
objects"), but a scanned page does contain an image, so Acrobat won't help
you here. There are a number of 3rd party applications and plug-ins
available. Try a Google search for
remove blank pages from scanned
pdf<http://www.google.com/search?client=safari&rls=en&q=removeblankpagesfromscanned+pdf&ie=UTF-8&oe=UTF-8>
This will bring up a few different solutions.
Another way is to use JavaScript to find text. You say that these documents
are OCRed, so if you have a blank page, it should not have any text on it.
With some JavaScript, you can identify pages that don't contain text. This
may however fail if you have a page that contains just e.g. a photographic
image. There won't be any text, but the page is certainly not blank.
Karl Heinz Kremer
[signature removed by host]

How to Download and Use HP iPrint for Android, iPhone, and iPod Touch

Greetings iPrint users!
The following documents contain instructions for downloading the iPrint Application and use the app to print photos.
Included on each page are step-by-step instructions with screen shots, as well as a video walkthrough.
iPhone and iPod Touch Users
How to Download and Use HP iPrint for iPhone and iPod Touch
Android Users
How to Download and Use HP iPrint for Android
Happy Printing
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

Hi nstav,
I'm sorry that you are having problems finding the app to print from your iPad to your Photosmart Premium C309a.
The app you are looking for is HP's ePrint Mobile app. You can find it in the Apple App Store or iTunes. I have included a link to a document about getting started with the app. I have also included an FAQ document for the app.
Getting Started with HP ePrint Mobile Apps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01616126
HP ePrint Mobile App FAQs
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HT4689 Is there a way to view and use two tabs at once?

Is there a way to view and use two tabs using mission control?

dandjr wrote:
i also can touch every email and hit delete, what i wanted to do is "select all" then delete, to cut out a step of touching each email...
I see now that you can do that. Too bad you can't do the same with messages...one at a time.
I'd rather have a "delete all" in messages and VVM if I had a choice. Those tend to pile up and before you know it, you have a hundred to delete!

How to view and use an xsl page in apache tomcat

Similar Messages

Maybe you are looking for