How To View Attachment Name

Once I've added an mp3 attachment to a message I'm composing, I cannot see the filename of the attachment.
Does anyone know how to make the file name show up?
thanks,
Rob

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Similar Messages

  • How to view Table names?

    Dear gurus....
    can u tell me how to view or whats the Tcode to view  table names like  for PO its CEKKO
    and for PR its CEBAN and RFQ,Service etc??
    Thanks

    Hi there,
    To search on a field from table it's coming help -F1 then technical details -F9
    If you double click on the field table-field you are directy to the view
    If u know table i would rather use SE16 or SE16N depending on r release.
    CEKKO is indeed a structure. EKKO is the table.
    enjoy!

  • How to view technical name of a planning function in IP?

    Hi,
    I have 2 aggregation levels created with 2 planning functions by someone else.
    I want to view technical name of that planning function so that I can include it in my WAD template.
    Please provide the info.
    Thanks & Regards,
    Rashmi.

    Hi Rashmi,
    In the Planning functions tab you click on the button right side of the window.
    Then you will get a window where you can select the columns to display. Pull the technical name window to display columns.
    Then you can see the technical name of that planning function.
    Regards,
    Ravi Kanth

  • How to view recipient name in Sent mail folder

    My Sent mail box on my hard drive shows my name rather than the recipient name.  How do I change the settings to view the recipient name rather than mine (which is on all of them, of course)?

    Hi Prashant
    It is possible with a parameter change in SOST:
    SOST_REC_CHANGE = X
    from:
    http://sapnw-professional.blogspot.co.uk/2013/07/sost-change-recipient-mail-address.html
    Regards
    Mike

  • How to view field name for a field in Oracle form?

    I was told you can do this but I forgot how.
    If you want to build a report, but don't know what the field name is in Oracle, you can open up the Oracle form and find the screen with that field name and do a trick that tells you the Oracle field name. Any help?

    Try this....
    REPORT ZZDYNAMIC_FIELD.
    DATA: BEGIN OF it1 OCCURS 0,
    printer(10) TYPE c,
    paper1(20) TYPE c,
    paper2(20) TYPE c,
    paper3(20) TYPE c,
    END OF it1.
    DATA: descr_ref TYPE REF TO cl_abap_tabledescr,
          i         TYPE i.
    FIELD-SYMBOLS:
      <key_comp_wa> TYPE abap_keydescr,
      <field>       TYPE ANY.
    it1-printer = 'MUC123'.
    it1-paper1 = 'KBLOGO'.
    it1-paper2 = 'BLANK'.
    it1-paper3 = 'DINA5'.
    APPEND it1.
    it1-printer = 'MUC123'.
    it1-paper3 = 'KBLOGO'.
    it1-paper2 = 'BLANK'.
    it1-paper1 = 'DINA5'.
    APPEND it1.
    TRY.
        descr_ref ?= cl_abap_typedescr=>describe_by_data( it1[] ).
      CATCH cx_root.
    ENDTRY.
    LOOP AT it1.
      i = 0.
      WHILE 1 = 1.
        i = i + 1.
        ASSIGN COMPONENT i OF STRUCTURE it1 TO <field>.
        if <field> is not assigned.
          EXIT.
        endif..
        IF <field> IS ASSIGNED AND <field> EQ 'KBLOGO'.
          READ TABLE descr_ref->key INDEX i ASSIGNING <key_comp_wa>.
          WRITE <key_comp_wa>-name.
          exit.
        ENDIF.
      ENDWHILE.

  • How to view attachment directly in Formscentral?

    Is there a way to view attachments directly in FormsCentral without having to download it - sort of like a preview button?  Also, why does it only prompt you to save the file, instead of just open it right away.  It's slightly cumbersome to have to save all the attachments individually.  At the very least, there should be an option to save all the attachments together and export them as one file. 

    Sorry, we don't support preview right now.
    You can select a range of attachment cells and download all attachments (included into the selection) as a zip file.
    Thanks
    Roman

  • How to view user name in terminal

    i forgot my user id and password my macairbook which i brought yesterday can someone help me how reset my credentials through safemode??

    You don't want Terminal or Safe Mode.
    Read the support doc here and follow the instructions:
    http://support.apple.com/kb/HT1274

  • How to view marker names in the Markers pane?

    If I add markers to a source clip and enter a name, then when I open the Markers panel, I only see Comments listed, not Names? Why?

    Martin, I've requested this as a feature myself just now. Am commenting here to help illuistrate to Adobe what I need... and also see if anyone has a workflow improvement for me.
    I'm hoping to not just have an on-screen easy-to-read list of marker names for a sequence, but also be able to copy/paste the names (and timecodes) in case I need to create a master-list somewhere.
    I do need to BOTH be able to hover-and-read in a sequence and also quickly read/search a list.
    Thanks for any feature implementation or workflow suggestion.
    -Gord

  • How to View Archived attachment in FI document

    Hello Gurus,
    We have a issue regarding to view attachment that was attached to Fi document.
    Document was posted on last year and some mail attachment attached to that document.
    We are able to view the attachment because it is archived.
    Could you please let us know  any one how to view attachment that is archived status.
    Thanks & Regards,
    Shanthi

    Hi,
    There is no standard procedure for change of BSEG table. You could develop your own using CHANGE_DOCUMENT function module.
    Regards,
    Eli

  • [SOLVED] How to view the *exact* name of the currently running kernel?

    Perhaps this question will seem dumb, but here goes : I have two kernels installed :
    [ruben@arch ~]$ yaourt -Q linux
    core/linux 3.2.9-1 (base)
    [ruben@arch ~]$ yaourt -Q linux-ck-kx
    repo-ck/linux-ck-kx 3.2.11-1 (ck-kx)
    Grub’s menu.lst is configured to boot linux-ck-kx :
    # general configuration:
    timeout 5
    default 2
    color light-blue/black light-cyan/blue
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
    initrd /boot/kernel26.img
    # (1) Arch Linux Fallback
    title Arch Linux Fallback
    root (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
    initrd /boot/kernel26-fallback.img
    # (2) Arch Linux CK-KX
    title Arch Linux CK-KX
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
    initrd /boot/initramfs-linux-ck.img
    # (3) Arch Linux CK-KX Fallback
    title Arch Linux CK-KX Fallback
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
    initrd /boot/initramfs-linux-ck-fallback.img
    And yet, I see no mention of *-ck-kx when issuing this comand :
    [ruben@arch ~]$ uname -a
    Linux arch 3.2.9-1-ARCH #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012 x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
    It does not matter whether I change the default kernel line in /boot/grub/menu.lst : I can set it to “ 0 ” or “ 2 ” and reboot, and the output of “ uname -a ” will always be exactly the same as above ; no mention of *ck-kx even though I know it is running.
    I searched the web on how to view the name of the running kernel, all results I found said to use uname, so is there another command I am missing here ? Or is it normal that both my kernels yield the same uname output ?
    Just curious, because I was playing around with kexec, and when doing “ fake ” reboots, I was alternating between the normal ARCH-kernel and the ck-kx*kernel, and I wanted to be sure that it actually worked, so I checked everytime with uname, and since I saw no difference in the outputs, I assumed kexec wasn’t working like it should, so I did a “ real ” reboot, but same uname outputs… So I must be missing something…
    Here are the kexec commands I used, just to be sure I am doing this properly :
    [ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux-ck.img /boot/vmlinuz-linux-ck
    [ruben@arch ~]$ sudo init 6
    and :
    [ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux.img /boot/vmlinuz-linux
    [ruben@arch ~]$ sudo init 6
    Thoughts ?
    Last edited by Montague (2012-03-15 22:00:02)

    litemotiv wrote:
    Hmm worksforme:
    $ uname -r
    3.2.11-1-ck
    One question for you litemotiv : do you have two kernels currently installed on your system, like I do, or did you uninstall the ARCH-kernel ? I ask because I might try this :
    $ sudo pacman -Rns linux
    and reboot, and see what happens…
    But before I do that, might as well try to debug it ;
    t1nk3r3r wrote:I would point the finger at GRUB, or something occuring near boot-time.
    https://wiki.archlinux.org/index.php/Boot_Debugging
    So I tried the “ Heavy Debug ” option, rebooted, then issued “ dmesg > dmesg.txt ” ; here are the first few lines of that file :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012
    [ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
    and the complete dmesg output is here. I am no expert at reading debuggin output, but from the above, it seems like the default ARCH-kernel is being booted, even though my menu.lst hasn’t changed from my previous post (exept for the debugging options) :
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # (0) Arch Linux CK-KX
    title Arch Linux CK-KX
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro rootdelay=5 panic=10 debug ignore_loglevel
    initrd /boot/initramfs-linux-ck.img
    # (1) Arch Linux CK-KX Fallback
    title Arch Linux CK-KX Fallback
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
    initrd /boot/initramfs-linux-ck-fallback.img
    I want the ck-kernel to boot, what it going on here ? Any more thoughts ?

  • Get Attachment Name and from address of mail in bpel process

    Hi All,
    I am using UMS Adapter to poll email server and  getting the attachment and saving it to local disk.
    In Payload from UMS adapter  i am getting href of the attachment  but I am not able to figure out as to how to get Attachment Name and From Address of a mail in my Bpel process.
    please guide me in getting them .
    Thanks in Advance
    Divyanshu

    1. Double click on your composite receive activity.
    2. Go to Properties tab in your receive activity.
    3. Click "+".
    4. Window that pops up,scroll down and select "jca.ums.from" and store it in some variable say fromAddress (Make sure before adding this property u create fromAddress variable of string data type).
    5. Click OK.
    6. In the same way add property for "jca.ums.msg.content-description" from drop down and assing it to some variable.
    you are good to go.
    Hope this helps.
    Regards,
    Karan
    Oracle Fusion Middleware Blog

  • I can't view artists name under title in compilations on my iphone

    I am trying to find out a solution, but seems it's not solved yet.
    On my Mac in iTunes my music collections is ordered by albums and compilations. All songs has a right tags. Albums has a Artists, Album Artists, Titles. Compilations has a check box Part of Compilation, Artist name, Title and Artist Album field are filed with Various Artists. But for some compilations I have deleted Album Artist just for experiment.
    At iTunes all looks great, I have albums and compilation in that order what I want. But in my iPhone and iPad a cant see artist name under the songs title. It's uncomfortable and not user friendly as for me. Sure it's not an issue in albums when you have an one Artist and one his Album. But in compilation it's very complicated to find some tracks by title.
    Please if you have any thoughts about how to view artists names in compilation under the tracks help me.
    Thank you in advance.

    I have found the same problem topic with some pictures. If it's helps.
    http://apple.stackexchange.com/questions/100594/view-individual-artists-in-compi lation-albums

  • Cannot view the names under the Main Navigator

    Hello,
    In the Main Navigator we have different type of segments. Under that for each and every segment we have different attributes assigned. For example the segments Food, Chemistry and Metal Processing. And for these we have different attributes assigned Main Industry Food and Main Industry Manufacturing Industry and Application Manufacturing Industry. But I cannot see the names under Manin Industry Manufacturing Industry where as I can see all the names under diffrent attributes. Can anyone help me how to view the names under Main Industry Manufacturing Industry.
    Thnx in advance
    Cheers
    Murali

    Hello Karsten,
    This is Knowledge Management. In the R&D Globe under MainNavigator I get this problem. I have set all the properties under content Management. I cannot view the Allowed Values(csv) under the MainIndustryManufacturingIndustry. Please help me.
    Thnx.
    Cheers,
    Murali

  • How do I change the download files to be the name of the sending file and NOT View Attachment?

    See above question, when I click download the name of the vile appears as view attachment, NOT the original name or file type. Please help, getting very frustrated especially when downloading an e-mail with severall attachments

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • How to find the Names of Most costly Views or Most Time consuming views

    Hi All,
    I had a database consisting of almost 200 views,as a part of Optimization process i want to find out the most costlier views.How to do that.Actually i want the names of the VIEWS,so that i can optimize that.Can any one help me out?
    I had one more doubt in our Database a view is created like view A( which is created by joining several tables).so do i need to add index on this view separately or does it take the index of the tables which i joined? And in our Database i  had created
    a VIEW which is derived from other views(the Joining objects are views not tables),so while i select recoreds from this views which is derived from other views it is taking a lot of time.Is tehre any problem with that?

    Please avoid such double post spread over several forums:
    http://social.msdn.microsoft.com/Forums/en-US/bae4042a-10b8-4d12-aa46-88a05ea37a76/how-to-find-the-names-of-most-costly-views-or-most-time-consuming-views?forum=sqldataaccess
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

Maybe you are looking for