How to view average symbol

How to view the average value (mean value) symbol (x with line above) in Java Swing?
Timo Ratilainen

for a square-symbol, but what is the code for the
average-symbol???http://groups.yahoo.com/group/unicode/message/5914
this works for me
asjf
import javax.swing.*;
public class AvTest {
     public static void main(String [] arg) throws Exception {
          JFrame frame = new JFrame("AvTest");
          frame.getContentPane().add(new JLabel("\u0078\u0305"));
          frame.pack();
          frame.show();
}

Similar Messages

  • How to view materials with selected moving average price

    Dear Gurus,
    How to view materials with moving average price greater than some selected value?  ie..Is there any report which takes moving average price as input?
    Thanks in advance,
    Sastry

    HI
    While checking any table or report u cannot give conditions (more than this value).
    If it mabe the case, down load the data from table MBEW - Field Name VERPR  to excel file. then u apply conditions, like greater than this value.
    U'll get the desired out put.
    Thanks
    Raman

  • How to view impact of making Moving Average ?

    Post Author: izhar
    CA Forum: Performance Management and Dashboards
    Hi, group members I am working on BOXI R2. Following are the steps which i performed for making moving average according to the manual. I have selected "Monthly" from the Calendar option Move the "Moving Average" in Defined Transformation and in last changed the entries of "Number of Points and Offset" Changes are saved successfully. But not able to see the impact of it. Can any member guide me here, How to view the impact of it. Regards, Izhar

    Post Author: Ferhat
    CA Forum: Performance Management and Dashboards
    hi,
    moving average is a transformation which we use to remove the seasonality from the time series data.
    we do it for to forecast based on just trend variability.
    if there is already no seasonality in your data you shouldn't see any clear impact.

  • How create new draw layer in Spreadsheet View Multisim Symbol Editor ?

    Hello,
    I would like to know how create new draw layer in Spreadsheet View Multisim Symbol Editor ?
    I am interested in this to create a contact or switch with 3 positions (one in and three out).
    So ... ??
    Best regards

    Hi,
    I am not really sure what you are trying to do with a new layer but the spreadsheet was hard coded and you cannot add a new layer.  In the Symbol Editor, there is a rectangle with dash lines, this is the symbol boundary and you can select Edit>>Resize Boundary Box to make the boundary larger/smaller.  Whatever you draw must be inside the boundary, you can only place pins outside the boundary.  The switch you created will not toggle in simulation, only the switches in the Master database can do this, R&D have to program them to toggle.
    Tien P.
    National Instruments

  • How to remove the '#'symbols for infoobject movement types in bex reporting

    Hi All,
      I have a problem in Bex reporting. The problem is when ever executing the report  that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
    is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
    this is very urgent please help to me on this issue.
    Thanks & Regards,
    Guna.

    Hi Guna,
    To achieve this issue, we need to replace the value of ‘#’, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for ‘cProject Key Figures’ as shown below. Click on the ‘Object Overview’ to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
    In SE11, type the table name in ‘Database Table’ field. Now press ‘F4’, then you will get the next screen to select one of the P/Q/S/T tables.
    Now click on the button rounded in the below screen to view the data in the table.
    Now click the execute button or press ‘F8’ to view the records.
    Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
    Now write the below code for that particular table in which you want to change the value ‘#’ to description ‘Blank’. In the below source code, we are updating particular table, setting the field as ‘Blank’ where it is null or no value. Here the field will automatically get updated to ‘#’ if there is no value or null.
    update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
    if sy-subrc eq 0.
    write 'successful'.
    commit work.
    else.
    write 'unsuccessful'.
    endif.
    OR
    If this # is because of the missing master data than,
    right click that IO -> maintain master
    you will see first row as a blank.
    whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
    maintain it according to your requirement, save and activate the master data
    Hope this helps u...
    Regards,
    KK.

  • How to Edit Flash Symbol in Photoshop?

    In Flash CS4, I have a graphic of a long filmstrip with 24 pix in it. I need to edit the symbol in photoshop (to put all new pix in), and then replace the current filmstrip with the new filmstrip. How? This is CS4, not CS5.

    Add an image to a folder with your fla, image folder(with image inside) and then re import image to stage again then try 'EDIT' the file!
    Date: Sat, 24 Sep 2011 13:31:35 -0600
    From: [email protected]
    To: [email protected]
    Subject: How to Edit Flash Symbol in Photoshop?
        Re: How to Edit Flash Symbol in Photoshop?
        created by sneedbreedley in Flash Pro - General - View the full discussion
    Whe nI double click on the image, a Bitmap Properties window opens with no option to edit. When I right-clcik on the image and select Edit With and choose photoshop, an error message appears saying The file G:\web-02\Site\film120902.gif does not exist, uable to launch external editor.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3936238#3936238
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3936238#3936238. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Flash Pro - General by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to view creation date using 'ls' command?

    Hi all,
    Anyone know how to get the 'ls' command to display creation date? When I do 'ls -la' I get the mod date, but cannot figure out how to view the creation date.
    Thanks!
      Mac OS X (10.4.2)  

    While there is NO way to do this as ls will only show the mod time there is using another program
    DL this HFSDebug.
    Running it on any file will display to you Create, Mod and access times. An example for you
    sudo hfsdebug /usr/local/bin/hfsdebug\ 2.04\ BETA\ G5
    path = Firefly:/usr/local/bin/hfsdebug 2.04 BETA G5
    # Catalog File Record
    type = file
    file ID = 20112378
    flags = 0000000000001010
    . File has a thread record in the catalog.
    . File has security data (ACLs).
    reserved1 = 0
    createDate = Wed Dec 14 00:57:14 2005
    contentModDate = Wed Dec 14 00:57:14 2005
    attributeModDate = Wed Dec 14 00:57:14 2005
    accessDate = Thu Dec 15 20:42:53 2005
    backupDate = Fri Jan 1 00:00:00 1904
    # BSD Info
    ownerID = 0 (root)
    groupID = 20 (staff)
    adminFlags = 00000000
    ownerFlags = 00000000
    fileMode = -rwxr-xr-x
    linkCount = 0
    textEncoding = 0
    attrBlocks = 0
    # Finder Info
    fdType = 0
    fdCreator = 0
    fdFlags = 0000000000000000
    fdLocation = (v = 0, h = 0)
    opaque = 0
    # Data Fork
    logicalSize = 121744 bytes
    totalBlocks = 30
    fork temperature = not a hot file
    clumpSize = 101 bytes
    extents = startBlock blockCount % of file
    0x362cd4 0x1e 100.00 %
    30 allocation blocks in 1 extents total.
    30.00 allocation blocks per extent on an average.
    # Resource Fork
    logicalSize = 0 bytes
    Enjoy!
    Peter
    PowerMac G5 DP 2.5Ghz   Mac OS X (10.4.3)  

  • Bridge - How to view image in full screen resolution

    In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?

    The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge.  Maybe I am not following you.  Sorry

  • How to View the Loaded Data

    Hi,
    I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
    Thanks

    Hi Madhu,
    You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
    Regards
    Hemant

  • How to view my macbook pro retina on a iMac late 2009?

    How to view my Macbook Pro Retina on a late 2009 27" iMac? Note: Mini DisplayPort won't fit.

    Hi rainson,
    Here is a list of video adapters and the Mac models they can be used with:
    About Apple video adapters and cables
    http://support.apple.com/kb/ht3235
    This article describes Target Display Mode, which may also be useful for what you are trying to do:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Cheers!
    - Ari

  • I am trying to open a website that is using Microsoft content viewer, and the page does not show. Any ideas on how to view this site using firefox. It works on IE.

    I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.

    When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
    For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
    You can read about PDF/A files in the Help.

  • How to calculate Average balance for an account

    Hi,
    How to calculate average balance for an account for a particular period say for JAN-12 period and after the end of that period for another two days 01-feb-12 and 01-feb-12 ?
    I'm using the following query :
    SELECT cc.segment1||'-'||cc.segment2||'-'||cc.segment3||'-'||cc.segment4||'-'||cc.segment5||'-'||cc.segment6 "Account_XX",
    nvl(sum(l.accounted_dr - l.accounted_cr),0) "Balance"
    FROM gl_code_combinations cc,
    gl_je_lines l
    WHERE cc.code_combination_id = l.code_combination_id
    AND l.set_of_books_id ='XX'
    and code_combination_id = replace it with code combination_id for account_xx
    AND l.effective_date <= '31-Jan-12' (january period end ??)
    GROUP BY cc.segment1||'-'||cc.segment2||'-'||cc.segment3||'-'||cc.segment4||'-'||cc.segment5||'-'||cc.segment6
    There are some discrepancies in "average balance" after end of month (Jan-12)?
    How to calculate average balances for a particular account (Account_XX above)from end of month of Jan to first two days of february?
    Thanks,
    Kiran

    Kiran,
    Please let me know first, is Average Balancing feature enabled in your GL Ledger?
    Regards
    Muhammad Ayaz

  • How to view the sql query?

    hi,
      how to view the sql query formed from the xml structure in the receiver jdbc?

    You can view SAP Note at
    http://service.sap.com/notes
    But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
    Reason and Prerequisites
    You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
    Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
    Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
    When you want to use a parameter documented here, please be aware to which category it belongs!
    Solution
    The following list shows all available parameters of category 1 or 2. Please note:
    Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
    Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
    The default value of a parameter is always chosen that it does not change the standard functionality
    JDBC Receiver Adapter Parameters
    1. Parameter name: "logSQLStatement"
                  Parameter type: boolean
                  Parameter value: true for any string value, false only for empty string
                  Parameter value default: false (empty String)
                  Available with: SP9
                  Category: 2
                  Description:
                  When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
                  This should be used only during the test phase and not in productive scenarios.
    Regards,
    Prateek

  • How to view errors if bulk collect has thrown errors

    Hi,
    I have few questions.
    1.How to view error whether bulk collect is successful or not
    2.What is identified & unidentified relationships in ERWIN
    3.How to see the errors whether the sql loder is successful or not
    and how to open the log file.Is there any specific command in UNIX
    which tells loader is successful or thrown error
    4.When executing the pl/sql procedure from UNIX.how to check for errors.
    Please provide the answers for this
    Thanks

    Use SAVE EXCEPTIONS clause in your FORALL loop.
    Is this for homework/test?

  • How to view deski report in html format ?

    Hi,
    I use BO XI R2. I use jsp.
    I just want to know how to view deski report in a html format.
    thanks a lot.
    hatoug

    Since you're using JSP, please post to the Java support forum:
    Java SDK Application Development
    or
    SAP Crystal Reports, version for Eclipse

Maybe you are looking for

  • How do I transfer pictures from Messages on my iPhone, to iPhoto?

    IPhone 4s, up to date on software. My daughter sends me adorable pix of our granddaughter through Messages. I can't figure out how to get them to transfer to iPhoto, either on my computer <MBPro> or even on the iPhone. Any suggestions? Kris

  • Installing components using auto-generated plans from Jython CLI

    Hi All, for specific reasons, we want to install a set of components with fixed signatures from Jython CLI, but without appropriate plans. In fact, we want to simulate the behavior that we know from Plugin UI, i.e. linking directly to an installer of

  • LUMIA 620

    I am planning to buy  a lumia 620 but it is currently available only in black and white will i be able to buy the orignal backcase in some other colour afterwards n where can i buy it from

  • Isssue when collecting the transport request for a query and its elements

    Dear All, When collecting a query and its elements, only the query is getting collected in to the request and not the elements and I an error is getting displayed as You can not use request xxxxx and elements could not be saved. This is in bw 3.5. Ca

  • Nice Solution to 7.3 error (-50)      (Provided you don't have an iphone)

    Hi People, I've been having the same probs as everyone else but i just did this and its sorted the prob. im pretty ******** at sorting this kind of stuff but this is really simple. Kudus to whoever wrote this originally: had same problem with 7.3. Te