HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

HI FOLKS,
I WANT TO SEE DATA IN THE REPORTS OF PRE-BUILT ANALYTICS DASHBOARDS? EG: AUTOMOTIVE, SALES, SERVICE DASHBOARDS. SO WHAT IS THE COMPLETE PROCESS TO SET UP THIS ENVIRONMENT. I'M USING SIEBEL ANALYTICS VERSION 7.8.5.
THANKS IN ADVANCE
VJ

Hi,
I am new to Business Intelligence Applications and keen on learning it.
I know Informatica and OBIEE(Not a very experienced person).
I have installed BIA on my local windows machine.
I am using Oracle Apps as the source.
In the execute tab I selected the HR-Oracle 11510 execution plan and ran it but it failed.
The workflow error log says the following:
"ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6193 [Error occured during expansion of DB connection parameters [Database connection name DataWarehouse for database connection variable $DBConnection_OLAP is not well defined.
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: CMN_1761 [Timestamp Event: [Tue Feb 26 15:59:35 2008]].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6226 [ERROR: Failed to initialize session [SIL_InsertRowInRunTable]].
ERROR : LM_36320 [Tue Feb 26 15:59:37 2008] : (1276|3864) Session task instance [SIL_InsertRowInRunTable]: Execution failed.
WARNING : LM_36331 : (1276|3864) Session task instance [SIL_InsertRowInRunTable] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_InsertRowInRunTable] will be failed.
ERROR : LM_36320 : (1276|3864) Workflow [SIL_InsertRowInRunTable]: Execution failed."..
I think I have missed few steps here and there.. I am struck up here.. I don't know what to do... I think its the problem connecting to the source and target schema.. can you please help me out?

Similar Messages

How to view pre-built Dashboards and Reports of Oracle BI- Apps?

Hi All,
We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
But we are facing problem in viewing any prebuilt dashboard or report.
Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
Any help would be highly appreciable.
Regards,
Manmohan Sharma

Hi Damon,
Thanks a lot.
Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
Could you please provide the path to get Prebuilt Dashboard & reports ?
Regards,
Manmohan Sharma

How to view data in Xcelsius from an external Excel file

Hi Everyone,
i wonder if you know How to view data in Xcelsius from external Excel file and not depend only on the emebded excel sheet.

Hi,
As per my understanding, excel has to be imported in Xcelsius to draw up the dashboard. Your aggregated data sits in the xlf file. Using an external excel file will not be possible (I guess).
One of the ways to connect to an external excel, is the use XML Maps but then your data has to be in the form of XML which will be pulled into excel first and then needs to be brought in Xcelsius using Data Manager.
You can explore XML Maps in xcelsius in SDN.
Regards
Nikhil

How to view data in tables by selecting the synonym from the database objec

I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?

This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric

How to view data into Infocube

Good Morning everybody.
I would like to know if somebody have any document with informations about RSA1, as for example "How to create a Back Up Infocube?" "How to view data into infocube?"
If you can send me
dacampos at br.ibm.com
Thanks a Lot
Daniel Campos - IBM Brazil.

Hi,
Backup Cube is used for saving the data of Planning Area.
Following steps for creating Backup Infocube
1.First Create Data Source thorugh Planning Area. Double click on PA,then go to Extras where u find option for creating Data Source,then replicate the cretaed Data Source.
2.Go to RSA1,Activate Created Data Source & Create Info Package uder the Data Source.
3.Create Info Cube under Info Area.
4.Create Transformation between Data Source & info Cube.
5.Activate Data Transfer Process(DTP).
For viewing the data into infocube
1.Right Click on selected Info Cube
2.Go to Manage
3.Select request & above info Cube Type(in Selectable data Target for Administration) & go to Contents
4.Select require field from Fld Selection for Output.
5.Come back & Increase no. of hits if require.
6.Execute it. You will find out the data in selected field.
Hope so it will be helpful for you.
Regards
Sujay

How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

Financial Analytics List of Out of Box Dashboards and Reports

We are trying to implement Financial Analytics and our business users like to see all out of box available dashboards and reports (mock ups or something) before we stand up the OBI Apps solution. This is running against EBS. Appreciate any links or pointers.
Thanks in advance
Kris

Hi Kris,
Please refer to you Oracle contactperson and ask for the 'Financial Analytics Product Guide'. This contains a list of reporting including screenshots and descriptions of what they present.
Regards,
Marco Siliakus

How to view data in SNC after getting transferred from ERP

Hi all
I have transferred material ,vendor, customer ,scheduling agreement ,demand from ERP to SNC system.
Now I want to view this demand in SNC. What I have done is in SNC is I opened supplier view.
In supplier view, I opened SMI monitor. Now when I click on F4 help of product I am not able to view the material
which I had transferred. Same is the case with location.
I know that in SNC, in order to view data following assignment is required.
Material  Location  Business Partner ( Org ) --- > BP ( Person )  User.
Now I have assigned Material to location .
Location to BP ( Org ).
BP ( org ) to BP ( Person ).
BP ( Person ) to user.
But still I am not able to view the data in F4 help ( For SMI overview screen ).
Next I learnt about Selection modes in SNC.I think I need to assign selection mode u201CPDNF_NEWu201D
To application ID of SMI overview screen in order to view Product and location in F4 help.
If I am correct than please let me know how should I proceed. Else please let me know
What all configuration is required to view product and material data in F4 help and eventually the demand which I
Had transferred from ERP.
Best Regards
Rahul

Hi Vasu/ hi Nikhil,
I have done what you mentioned but still could not see the data in SNC Web UI.
Let me explain once again.
Consider a case when Panasonic ( Supplier ) is managing inventory for Walmart ( Customer ).[ VMI scenario ]
Now
Step 1 : Walmart will create Material,Location,SA ,demand in his ERP.
Step2 : Master data with demand will get transferred to from customers ERP system to SNC system.
I can see Product and location by SNC -- > Master data -- > Product/Location.
Till this point everything is fine.
Next I have done following.
Assign my user to Business Partner of type org ( Customer ).
Location is assigned to Business partner.( Customer ) as material will be shiped to customer location.
Location is assigned to model 000
Material is assigned to Location and Planning version 000.
Now logically assignement is as follows.
User -- > BP --> Location --> Material.
Now when I go to customer view ,in product and location,I should be able to see my product and Location.
But I am not able to see.
Could you help where I am going wrong.
Regards
Rahul

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

HOW TO VIEW DATA IN LOG VIEW - PROCESS CHAIN?

HAI FRIENDS,
I SIMULTANEOUSLY LOADED DATA INTO ODS AND INFOCUBE....I USED THE PROCESS CHAIN TO LOAD DATA.. BUT AFTER ACTIVATING, I COULD N'T VIEW THE DATA IN THE LOG.AFTER THAT I FOUND OUT DATA IS NOT LOADED INTO THE ODS ..SO I ACTIVATED IT AGAIN.. DID THE PROCESS CHAIN ACTIVATE.. EVEN AFTER THAT I COULD NOT VIEW DATA IN LOG VIEW AND ALSO WHEN I CLICK ON LOAD DATA PROCESS(ODS) NO DATA IS FOUND.. PLS HELP OUT
WITH REGARDS
APPU

Hi,
Go to the manage screen for that ODS. See teh relevent request and find how many records were transferred and how many added.
If it is zero added records, then check for any rules.
Arun
Assign pts if useful

How to view Date and Time in messages app?

How do I display the date & time of every individual message, in "Messages" app [Version 8.0 (4226)] for OS X (10.9.4)
It seems to sort messages sent within a few minutes of each other as conversations, and only inserts a timestamp every 5 or 6 messages....I need to see the date & time of each one.
I know you can do this on the iPhone by pulling the screen to the left, so the data is there..., but I cannot figure out how to view it on my iMac.
Thanks!

Hi,
Mouse over the text or Pic that was sent.
That little boxed time stamp will appear (It may be a yellow box in a Mavericks boot)
9:13 pm Saturday; August 9, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to view data of a structure.

Dear all
I am a end user. I have access of tcode se16 which allow us to view data from table. But information like long text in PR is stored in a structre. How we can view data stored in a structure.
for ex Long text data of PR is stored in a structure RM06B.
How can we view this using standard trasactions.
Regards
Rahul

Rahul,
Structures do not contain data on their own. They are populated by a program. In your case, there are about a dozen standard SAP programs that use this structure. The structure is populated, temporarily, only when you run one of these programs.
The data may originate from anything from within the program: fields in a table, from calculations, from other data objects. There is no data viewer for a structure.
Long Text in SAP is usually (but not always) stored in a couple of generic text tables. Usually PR long text is stored in STXH and STXL. Before you get your hopes up, you should be aware that the long text data is encoded, and it cannot be viewed directly in a table viewer such as SE16. If it is inadequate for you to use ME53 to read the text in a Purchase req, then you should contact an ABAPer, who can write a custom program to view selected texts that are stored in STXH/STXL.
Best Regards,
DB49

How to view "date from" and "date to"

Hi,
I have loaded EMP data. In the mapping "date from" and "date to" are visible. But these fields are not seen when I display the EMP data.Can someone please tell me how to view these fields?
Thanks,
Williams

I got your question . Please find my understandings .
In the transformation Please check weather routine or formula is written which is stopping the dats
to be updated to the target .
I mean data is there in the source but if its not updating to target it seems some rules have been set up in the transformation . Please check .
Assign marks is the best way to appreciate help

How to view data usage on Centro

Hello, I have a new Palm Centro on AT&T. I need to view how much total data I have used, but I cannot for the life of me find a usage counter in the Palm OS. Is there a counter, or any way to view this information?
Thanks.
Post relates to: Centro (AT&T)

There is a link to access "My Minutes" from the shortcuts screen for an AT&T Centro, but you're right - no link for Data usage.
I've always been able to view this from AT&T's webpage for my account though - you may be able to view it using Blazer and logging into your account.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to view data in HR data sources?

Hi all of you,
I am learning to extract data from HR module into BW on IDES system. I want to see if there is data in the 0HR_PY_1 data source. I went to RSA3 and gave the data source as 0HR_PY_1. What do I give in the fields BIWMONTH and PERNR. In what format do I enter the date in BIWMONTH and PERNR. Please advise.
Thank you.
TR.

Hi Suresh,
Thank you for the reply. But what do I enter in the field BIWMONTH.
I tried entering
BIWMONTH (From) 000006 (TO) 000012
PERNR (From) 00000010 (To) 00000120
But I am getting the message 0 data records selected.
Please advise how to view the data.
What tables should I use to see the data in SE11?
Please help.
Thank you.
TR.

HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

Similar Messages

Maybe you are looking for