How to view data in SNC after getting transferred from ERP
Hi all
I have transferred material ,vendor, customer ,scheduling agreement ,demand from ERP to SNC system.
Now I want to view this demand in SNC. What I have done is in SNC is I opened supplier view.
In supplier view, I opened SMI monitor. Now when I click on F4 help of product I am not able to view the material
which I had transferred. Same is the case with location.
I know that in SNC, in order to view data following assignment is required.
Material Location Business Partner ( Org ) --- > BP ( Person ) User.
Now I have assigned Material to location .
Location to BP ( Org ).
BP ( org ) to BP ( Person ).
BP ( Person ) to user.
But still I am not able to view the data in F4 help ( For SMI overview screen ).
Next I learnt about Selection modes in SNC.I think I need to assign selection mode u201CPDNF_NEWu201D
To application ID of SMI overview screen in order to view Product and location in F4 help.
If I am correct than please let me know how should I proceed. Else please let me know
What all configuration is required to view product and material data in F4 help and eventually the demand which I
Had transferred from ERP.
Best Regards
Rahul
Hi Vasu/ hi Nikhil,
I have done what you mentioned but still could not see the data in SNC Web UI.
Let me explain once again.
Consider a case when Panasonic ( Supplier ) is managing inventory for Walmart ( Customer ).[ VMI scenario ]
Now
Step 1 : Walmart will create Material,Location,SA ,demand in his ERP.
Step2 : Master data with demand will get transferred to from customers ERP system to SNC system.
I can see Product and location by SNC -- > Master data -- > Product/Location.
Till this point everything is fine.
Next I have done following.
Assign my user to Business Partner of type org ( Customer ).
Location is assigned to Business partner.( Customer ) as material will be shiped to customer location.
Location is assigned to model 000
Material is assigned to Location and Planning version 000.
Now logically assignement is as follows.
User -- > BP --> Location --> Material.
Now when I go to customer view ,in product and location,I should be able to see my product and Location.
But I am not able to see.
Could you help where I am going wrong.
Regards
Rahul
Similar Messages
-
How to save data in ztable after editing in alv report
how to save data in ztable after editing in alv report?
Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella. -
How to view data in Xcelsius from an external Excel file
Hi Everyone,
i wonder if you know How to view data in Xcelsius from external Excel file and not depend only on the emebded excel sheet.Hi,
As per my understanding, excel has to be imported in Xcelsius to draw up the dashboard. Your aggregated data sits in the xlf file. Using an external excel file will not be possible (I guess).
One of the ways to connect to an external excel, is the use XML Maps but then your data has to be in the form of XML which will be pulled into excel first and then needs to be brought in Xcelsius using Data Manager.
You can explore XML Maps in xcelsius in SDN.
Regards
Nikhil -
How to view data in tables by selecting the synonym from the database objec
I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?
This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric -
How to view data into Infocube
Good Morning everybody.
I would like to know if somebody have any document with informations about RSA1, as for example "How to create a Back Up Infocube?" "How to view data into infocube?"
If you can send me
dacampos at br.ibm.com
Thanks a Lot
Daniel Campos - IBM Brazil.Hi,
Backup Cube is used for saving the data of Planning Area.
Following steps for creating Backup Infocube
1.First Create Data Source thorugh Planning Area. Double click on PA,then go to Extras where u find option for creating Data Source,then replicate the cretaed Data Source.
2.Go to RSA1,Activate Created Data Source & Create Info Package uder the Data Source.
3.Create Info Cube under Info Area.
4.Create Transformation between Data Source & info Cube.
5.Activate Data Transfer Process(DTP).
For viewing the data into infocube
1.Right Click on selected Info Cube
2.Go to Manage
3.Select request & above info Cube Type(in Selectable data Target for Administration) & go to Contents
4.Select require field from Fld Selection for Output.
5.Come back & Increase no. of hits if require.
6.Execute it. You will find out the data in selected field.
Hope so it will be helpful for you.
Regards
Sujay -
Hi All,
How to view the change immediately after a java file that is used in jsp is modified
without restarting server or redeploy?
Moreover, it is better to keep the original session.
Any suggestion is appreciated.
Kammau
Hi,
In order to have a new version of a java class, the current classloader must be
deleted and a new one created. This is what redeployment does. I believe that
this is more of an issue with Sun's implementation of classloaders. You could
ask BEA support (719.232.7878) and see if they have any plans to periodically
check jar files to see if java class file timestamps and destroy and re-create
classloaders on the fly.
1) You will still have to accept the performance hit of destroying classloaders
and creating new ones. There isn't any way around that.
2) I would think you would want to have more explicit control in production and
integration anyway.
You can redeploy applications from the command line (script) file not just the
console.
Hope this helps,
pat
"Kammau" <[email protected]> wrote:
>
>Hi All,
>How to view the change immediately after a java file that is used in
>jsp is modified
>without restarting server or redeploy?
>Moreover, it is better to keep the original session.
>Any suggestion is appreciated.
>
>Kammau
-
How to add date with month after convert number to month?
How to add date with month after convert number to month?
Month Date Result
24 21/11/09 24*(21/11/09)
I want to add both the column and result should be 21/11/11
Thanks
NiharHmm,
Because, you are using YYYY for '09'.
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/RRRR'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/2009
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/YYYY'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/0009Or with Add_months
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/YYYY'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/0012
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/RRRR'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/2012-Arun -
After, getting refunded from a purchase I got, how do I repurchase?
After, getting refunded from a purchase I got, how do I repurchase?
You just go through purchasing again as normal
-
HT1495 how to restore iphon-without backup, after it synchronization from ipod
how to restore iphon-without backup, after it synchronization from ipod
Thanks Eric,
After inserting the original DVD I installed OSX and after reboot I had a working computer.
There was no opportunity to restore the TM backup. however when I rebooted from the
DVD again I saw that possibility from a menu of the install utility.
I ran through the restore over night (8 hours) and when I woke up, I had my computer back!
Thanks for helping me out.
Cheers, Rob -
How to delete photos in iphone which is transferred from mac, please help?
Hi Everyone..
I got an new iphone5 ...Am not able to delete photos which are transferred from my Mac book pro to my iphone...
Please help and guide me how to delete photos in iphone which is transferred from mac book iphoto..
Regards
ShashidharYou need to do it through iTunes, by unsyncing them
Wtih your iPhone connected, open iTunes on your computer, and click on your iPhone's name.
This should bring up the Overview Page, then click on the Photos Tab.
From their uncheck the folders that have the images you want top remove from your phone. Then sync the phone. itunes will remove the pictures during the sync process. -
How do I initialize an array after getting xml data via httpservice?
I am having a problem trying to initialize an array with data from an external xml file obtained via httpservice. Any help/direction would be much appreciated. I am using Flex 4 (Flash Builder 4).
Here is my xml file (partial):
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Root>
<Row>
<icdcodedanddesc>00 PROCEDURES AND INTERVENT</icdcodedanddesc>
</Row>
<Row>
<icdcodedanddesc>00.0 THERAPEUTIC ULTRASOUND</icdcodedanddesc>
</Row>
<Row>
<icdcodedanddesc>00.01 THERAPEUTIC US VESSELS H</icdcodedanddesc>
</Row>
<Row>
<icdcodedanddesc>00.02 THERAPEUTIC ULTRASOUND O</icdcodedanddesc>
</Row>
</Root>
Here is my http service call:
<s:HTTPService id="icdcodeservice" url="ICD9V2MergeNumAndDescNotAllCodes.xml"
result="icdcodesService_resultHandler(event)" showBusyCursor="true" />
(I have tried resultFormat using object, array, xml).
I am using this following Tour de Flex example as the base -http://www.adobe.com/devnet-archive/flex/tourdeflex/web/#docIndex=0;illustIndex=1;sampleId =70500
and updating it with the httpservice call and result handler. But I cannot get the data to appear - I get [object Object] instead. In my result handler code I use "icdcodesar = new Array(event.result.Root.Row);" and then "icdcodesar.refresh();".
The key question is: How to I get data from an external xml file into an array without getting [object Object] when referencing the array entries. Thanks much!
(Tour de Flex example at http://www.adobe.com/devnet-archive/flex/tourdeflex/web/#docIndex=0;illustIndex=1;sampleId =70500 follows)
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:local="*"
skinClass="TDFGradientBackgroundSkin"
viewSourceURL="srcview/index.html">
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
@namespace mx "library://ns.adobe.com/flex/mx";
@namespace local "*";
s|Label {
color: #000000;
</fx:Style>
<fx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
private var names:ArrayCollection = new ArrayCollection(
["John Smith", "Jane Doe", "Paul Dupont", "Liz Jones", "Marie Taylor"]);
private function searchName(item:Object):Boolean
return item.toLowerCase().search(searchBox.text) != -1;
private function textChangeHandler():void
names.filterFunction = searchName;
names.refresh();
searchBox.dataProvider = names;
private function itemSelectedHandler(event:SearchBoxEvent):void
fullName.text = event.item as String;
]]>
</fx:Script>
<s:layout>
<s:HorizontalLayout verticalAlign="middle" horizontalAlign="center" />
</s:layout>
<s:Panel title="Components Samples"
width="600" height="100%"
color="0x000000"
borderAlpha="0.15">
<s:layout>
<s:HorizontalLayout horizontalAlign="center"
paddingLeft="10" paddingRight="10"
paddingTop="10" paddingBottom="10"/>
</s:layout>
<s:HGroup >
<s:Label text="Type a few characters to search:" />
<local:SearchBox id="searchBox" textChange="textChangeHandler()" itemSelected="itemSelectedHandler(event)"/>
</s:HGroup>
<mx:FormItem label="You selected:" >
<s:TextInput id="fullName"/>
</mx:FormItem>
</s:Panel>
</s:Application>Hello,
Instead of extracting the first zero element from the vid array, you should take that out and connect it allone.
Attachments:
init.bmp 339 KB -
HOW TO VIEW DATA IN LOG VIEW - PROCESS CHAIN?
HAI FRIENDS,
I SIMULTANEOUSLY LOADED DATA INTO ODS AND INFOCUBE....I USED THE PROCESS CHAIN TO LOAD DATA.. BUT AFTER ACTIVATING, I COULD N'T VIEW THE DATA IN THE LOG.AFTER THAT I FOUND OUT DATA IS NOT LOADED INTO THE ODS ..SO I ACTIVATED IT AGAIN.. DID THE PROCESS CHAIN ACTIVATE.. EVEN AFTER THAT I COULD NOT VIEW DATA IN LOG VIEW AND ALSO WHEN I CLICK ON LOAD DATA PROCESS(ODS) NO DATA IS FOUND.. PLS HELP OUT
WITH REGARDS
APPUHi,
Go to the manage screen for that ODS. See teh relevent request and find how many records were transferred and how many added.
If it is zero added records, then check for any rules.
Arun
Assign pts if useful -
How to view data of a structure.
Dear all
I am a end user. I have access of tcode se16 which allow us to view data from table. But information like long text in PR is stored in a structre. How we can view data stored in a structure.
for ex Long text data of PR is stored in a structure RM06B.
How can we view this using standard trasactions.
Regards
RahulRahul,
Structures do not contain data on their own. They are populated by a program. In your case, there are about a dozen standard SAP programs that use this structure. The structure is populated, temporarily, only when you run one of these programs.
The data may originate from anything from within the program: fields in a table, from calculations, from other data objects. There is no data viewer for a structure.
Long Text in SAP is usually (but not always) stored in a couple of generic text tables. Usually PR long text is stored in STXH and STXL. Before you get your hopes up, you should be aware that the long text data is encoded, and it cannot be viewed directly in a table viewer such as SE16. If it is inadequate for you to use ME53 to read the text in a Purchase req, then you should contact an ABAPer, who can write a custom program to view selected texts that are stored in STXH/STXL.
Best Regards,
DB49 -
How to view data in HR data sources?
Hi all of you,
I am learning to extract data from HR module into BW on IDES system. I want to see if there is data in the 0HR_PY_1 data source. I went to RSA3 and gave the data source as 0HR_PY_1. What do I give in the fields BIWMONTH and PERNR. In what format do I enter the date in BIWMONTH and PERNR. Please advise.
Thank you.
TR.Hi Suresh,
Thank you for the reply. But what do I enter in the field BIWMONTH.
I tried entering
BIWMONTH (From) 000006 (TO) 000012
PERNR (From) 00000010 (To) 00000120
But I am getting the message 0 data records selected.
Please advise how to view the data.
What tables should I use to see the data in SE11?
Please help.
Thank you.
TR. -
Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Sudden screen lines + iMac not booting
Hi everyone: I have an 24" Intel iMac, only 4 month with it, it was working normally then I left and my computer entered sleep mode, when I came back I prssed the keyboard to wake my computer the screen was black with green stains, I did reset, and o
-
Logic unexpected quit now project won't open???
So, I'm working in a project for about three hours and Logic quits as I clicked to open the audio editor. It is a memory issue. I only have 4GB... But now I can't open the project because it quits every time. What to do???
-
How to get 64 bit in Photoshop CC (with Win 8 64bit)?
My Photoshop CC is only 32bit. I need 64bit. I use Win 8 64bit und 16GB Ram.
-
Simple sort question - Numbers '09
Have a table with a few colums. One is a column of dates and the other of categories. Wish to sort the entire table in priority order, first by category, then by date. Easy to do in Excel. Am sure Numbers has a way to do this, but can't find it.
-
I can't insert row because of sequence trigger
I use JDeveloper 3.1. In table "Category", column "CAT_Id"(PK) has trigger: BEGIN select cat_seq.nextval into :new.cat_id from dual ; END; I created an entity object based on this table and set the attribute "CatId":Refresh after Insert. Then I creat