How to view Dehydration Store Performance in OEM 12c Cloud Control

Hi All,
I have installed OEM 12c Cloud Control.I want to view dehydration store performance for my fusion middleware domain.Can anyone please suggest me how can I achieve this?
I have added the database, where soa schemas are created, as a monitored target in OEM 12c Cloud Control. Also have added Fusion middleware domain for which I want to view dehydration store management.
Thanks in Advance!!
Edited by: Roshni Shankar on Sep 19, 2012 5:26 AM

You should open an SR and support can assist you with it. The only current case where that feature is known to not work is in the case where the Dehydration Store is running on RAC. Otherwise, it should be possible to get it to work. The main thing is that you need to have DB configuration properties (host, port, sid) that have a 3-way string match between the JDBC data source configuration in the WLS server, the JDBC properties you add to the Monitoring Properties of the SOA Infrastructure target, and the connect settings of the Database target in EM that matches to the dehydration DB.
If there isn't a match in all 3, the Dehydration Diagnostics page will not work. But again, to look into your specific setup, you should file an SR and work with support.

Similar Messages

How to add a weblogic cluster in OEM 12c Cloud Control

Hi All,
I have created one SOA domain with a two node cluster. My cluster contains two servers; one on each machine. Now I want to monitor my domain with OEM 12c cloud control. I my OEM 12c cloud control I can add my weblogic domain but if that domain contains a cluster and in the cluster one server must be residing on the some other machine. Then how exacly in OEM 12c I can a add a target which is of type weblogic domain and contains a weblogic clusters with two servers?
Please advise on this..!!
Thanks in advance!!

EM12c can take care of multiple hosts during discovery and you don't have to do anything special, however, for SOA its advisable to have local agents monitor their individual hosts; hence, you should first discover both your hosts in EM first by pushing agents to each of the hosts using Setup>Add Targets>Add Targets Manually and then discover the SOA domain. You local agents will be picked up automatically that will eventually monitor your 2 nodes/servers.

How to view response time for each execution in OEM 12c Cloud Control

Hi All,
I want to view response time of each execution for my SOA composite in OEM 12c Cloud Control. Can anyone tell me how can I achieve that?
Thanks in Advance!!

You should open an SR and support can assist you with it. The only current case where that feature is known to not work is in the case where the Dehydration Store is running on RAC. Otherwise, it should be possible to get it to work. The main thing is that you need to have DB configuration properties (host, port, sid) that have a 3-way string match between the JDBC data source configuration in the WLS server, the JDBC properties you add to the Monitoring Properties of the SOA Infrastructure target, and the connect settings of the Database target in EM that matches to the dehydration DB.
If there isn't a match in all 3, the Dehydration Diagnostics page will not work. But again, to look into your specific setup, you should file an SR and work with support.

How to view messages in Jms queue from OEM 12c Cloud Control

Hi All,
How can I view messages in a Jms queue from OEM 12c Cloud Control without logging into WebLogic Administration Console?
Thanks in Advance!!

EMCC 12c gets down to the JMS message queue/topic level in regards to the metrics being collected. It doesn't provide a view into the actual messages themselves. Are you trying to capture/track messages with a particular payload?

How to inegrate OID with OEM 12c Cloud Control

Hi All,
Can anyone please tell me how can I integrate OID with OEM 12c Cloud Control. As we can integrate our weblogic administration console with OID,is it possible to integrate OEM cloud control with OID?
Thanks in Advance!!

Hi,
Please find the URL below:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/security.htm#BABGAGIJ
Following section will provide you the information for OID intergration:
13.2.5 Oracle Internet Directory (OID)
You can implement an OID-based authentication scheme to have Enterprise Manager authenticate users against the OID.
Running the emctl config auth oid command on the OMS creates a WebLogic authentication provider of type OracleInternetDirectoryAuthenticator that uses the configuration parameter values specified by the command. Any configuration values not specified retain the default values. Tuning and modification of advanced OID configuration parameters is carried out through the WebLogic Server Administration Console and not the emctl config auth oid command.
Prerequisites
Oracle Internet Directory LDAP server is set up and running.
Run the emctl config auth oid command on each OMS.
emctl config auth oid -ldap_host <ldap host> -ldap_port <ldap port> -ldap_principal <ldap principal> [-ldap_credential <ldap credential>] [-sysman_pwd <pwd>] -user_base_dn <user base DN> -group_base_dn <group base DN>
where:
ldap_host: LDAP host name
ldap_port: LDAP port
ldap_principal: The distinguished name (DN) of the LDAP user the WebLogic server should use to connect to the LDAP server.
ldap_credential: Password for the user specified by ldap_principal.
user_base_dn: The base distinguished name (DN) of the tree in the LDAP directory that contains users.
group_base_dn - The base distinguished name (DN) of the tree in the LDAP directory that contains groups.
Example:
emctl config auth oid -ldap_host "ldaphost" -ldap_port "3060" -ldap_principal "cn=orcladmin" -user_base_dn "cn=users,dc=us,dc=oracle,dc=com" -group_base_dn "cn=groups,dc=us,dc=oracle,dc=com" -ldap_credential "my_ldap_password" -sysman_pwd "my_sysman_password"
Stop the OMS.
emctl stop oms -all
Restart the OMS.
emctl start oms
Note:
For Enterprise Manager deployments consisting of multiple OMS instances, emctl config auth oid must be run on each OMS. Each OMS must be restarted in order for changes to take effect.
Testing the OID Configuration
Use the WebLogic Server Administration Console (Users and Groups tab) to check whether the OID configuration has been successful. To navigate to this tab, select Home/Summary of Security Realms/myrealm/Users and Groups. From the Users and Groups tab, you should see users and groups showing up from the OID.
Best Regards,
Venkat

Facing error while creating report in OEM 12c Cloud Control

Hi All,
I want to create a report in OEM 12c Cloud Control in Information Publisher. I have select element as "Table from SQL" and want to select data from "gc$metric_values_latest" view. But when I am writing a sql statement like..
select * from gc$metric_values_latest
Then on execution I am getting the following error "Error rendering element. Exception: ORA-00942: table or view does not exist "
What can be the issue for this. Please suggest..
Thanks in Advacnce!!!

Is this mean that we can not fetch data from gc$metric_values_latest view or we need to do some configuration in order to fetch information from this view. Because I am able to fetch from views like mgmt$metric_current or mgmt$metric_history
So what can be the probable cause of not getting access to gc$metric_values view

Exception Management in OEM 12c Cloud Control

Hi All,
It is mentioned in the Oracle Documents that Exception Management is a part of Business Transaction Management feature which can ne achieved by enabling SOA management pack EE on the target which in turn provides transaction alerting and searching to locate exceptions and errors in transactions that span multiple application components.
But then can any one please tell me how can I achieve this? That means what all configuration (other than soa management packEE) is required for this exception management and how can I do this OEM . I am not able to find a good document which explain the exception management in OEM 12c cloud control.
Please help!!
Thanks in Advance!!

Business transaction Management 12c (BTM)is licensed with SOA Manangement pack Enterprise Edition along with WLS Mgmt Pack and management pack for non-oracle middleware. So, if you have SOA Mgmt Pack EE, then you are already licensed for BTM 12c.
You need to download BTM12c (http://www.oracle.com/technetwork/oem/downloads/btw-downloads-207704.html) and then you need to install it (http://docs.oracle.com/cd/E24628_01/install.121/e37016/toc.htm) . Once the installation is complete, you will need to send traffic through your managed targets, where you would have already deployed the BTM observers (Ref. installation guide). Once traffic will be sent, your services will get discovered and then you will need to create transactions (http://docs.oracle.com/cd/E24628_01/doc.121/e37014/transactions.htm#sthref186) that you may wanna monitor. As part of the transaction creation, you can enable logging on the transaction and once that's done, you will be able to search and manage exceptions by monitoring your transactions.
Edited by: EM_SOA_assist on Nov 2, 2012 12:16 AM
Edited by: EM_SOA_assist on Nov 2, 2012 12:17 AM

Need information about OEM 12c Cloud Control Monitoring

Hi All,
I need a piece of information about OEM 12c Cloud Control. Can we monitor JCapps from OEM 12c Cloud Control. If yes, then do I need some plugins to get installaed for this or any other requirement?
Thanks in Advance!!

Hi,
Glen is referring to Service management, a built in feature of Enterprise Manager. You'll find it under main targets drop down -- Services.
It is a way of pulling several systems together, add synthetic service test to the service and track metrics. System metrics can be promoted and all synthetic test metrics can be used to define Service level agreements, get alerts and create incidents against your defined service.
Documentation can be found here: http://docs.oracle.com/cd/E24628_01/doc.121/e24473/apm.htm#BABDIDFC
Some viewlets can be found here: http://www.oracle.com/technetwork/oem/em12c-screenwatches-512013.html
specific services viewlet: https://apex.oracle.com/pls/apex/f?p=44785:24:10147266048655::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:6419,2
Hope this helps, if you have any further questions on this topic let us know.
R, Jurgen

Location to start nodemanager in OEM 12c Cloud control

Hi All,
Can anyone please tell me from which location I can start nodemanager in OEM 12c Cloud Control
Thanks in advance!!

node manager is automatically started when the OMS is started. See also:
<OMS home>/bin/startNodeManager.sh

OEM 12c Cloud Control/WebLogic - Running slow

Recently installed Oracle Enterprise Manager 12c Cloud Control on AIX 64 Bit Server. It is running considerably slower than existing 10g Grid Control version.
We setup on a server with 4 GB and plenty of diskspace - I believe the 10g server only had 1 GB free. Has Oracle gone the way of Bloatware as MS/Symantec, and others? If so, what are the new unofficial (there are recommended minimums vs. functional minimums) specs to run OEM on a server?
Thank you in advance for you comments!

Before you started installing you did of course did read the documentation? Maybe you missed the part of the hardware requirements in the Basic Installation Guide. The OMS server should have at least 6 GB memory and 2 cpu's and for the Repository database the same.
But this depends on the number of agent, targets and concurrent users. You can check this in the mentioned guide in the chapter "Meeting Hardware Requirements".
If the adviced redo log size is 300 MB and I would not know you would stick to the default redo log size. It is a small effort to create a number of redo logs with the proper size and drop the small ones.
You run de repository on a production server, meaning you can have a lack of resources. It is adviced to have the OMS and OMR on the same or on separate dedicated servers.
Eric

How to integrate oracle 11GR2 Database with OEM 12C

Dear experts,
I have installed Oracle Enterprise Manager Cloud Control 12c Release 2 Plug-in Update 1 (12.1.0.2) on windows 2008 64-bit version.
how can I integrate my Oracle 11G R2 database with OEM.
Thanks.

Refer the following documents for promoting (discovering/adding) target database to EM 12c.
Understanding Database Discovery in Enterprise Manager 12c Cloud Control (Note 1400463.1)
Cloud Control for Oracle Database Assistant: Setup of Cloud Control to Manage Database Targets (Search Helper) (Note 1569848.2)
Discovering, Promoting, and Adding Targets:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/discovery.htm#CBAEGHBH
HTH
Mani

Monitoring oracle database from OEM 12c grid control

Hi,
I am using OEM 12c grid control to analysis various server's performance. The application database in oracle database v11g. Is there any problem if i add database on oem to monitor? To be more clear, If it creates any conflict between database's em and oem's em when i want to deploy em agent on database ? Is it necessary to remove database's EM before installing oem agent on it?

Rakesh,
Please refer to the following links:
SOA and Middleware Management
http://www.oracle.com/technology/products/oem/prod_focus/soa_mgmt.html
New Oracle Enterprise Manager Management Pack for SOA and Middleware Management
http://blogs.oracle.com/oem/2009/06/new_oracle_enterprise_manager_1.html
ORACLE ENTERPRISE MANAGER 10g: ORACLE MANAGEMENT PACK PLUS FOR SOA
http://www.oracle.com/technology/products/oem/pdf/ds_soa_mgmt_pack.pdf
Regards,
Hussein

How to setup DISK SPACE alert on OEM 10g Grid Control...

Gurus,
I am trying to setup DISK SPACE notification / alert thru OEM 10g Grid Control, but so far no luck.
Can someone help/guide me on how to achieve this?
Please advice.
Thanks & Regards,
Kartik

Those two links don't say anything about "DISK SPACE ALERT" I already know how to setup notification. I suppose you are talking about Filesystem Space Available (%)
If you need to setup an alert (Notification) then i suppose you need to setup an notification rule.
Yes, these notes do not have the key word "DISK SPACE ALERT" you are looking for, but if you go through the first note CLEARLY and COMPLETELY, you should find your answer.
And he has given an example for Filesystem space available in this note, which is what you are looking for.(I think so)
Say for Disk Space, you create a notification rule for target hosts and have metric "Filesystem Space Available (%)" defined in that rule.
If you aren't talking about notifications and just want to setup an filesystem space available metic, then follow this note:
How To Setup Host Metrics For Filesystem
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=749341.1

How to view and store movies from iTunes.

New purchase of ATC 2TB this month Aug 22nd 2014. new surfboard modem same day. I am running direct TV as well. The ATC is tied in after the Surfboard 802.11. What is best configuration to watch ATV(2)? tried it last night and it ran even slower than before the upgrade. All devices are running on wifi. I have an early 2011 MBP 15" 500GB, and a late 2013 MBP air 11" 256GB. All devices are running the latest versions of iOS and required firmware. Im trying to learn and figure out the best set up for the little ones to watch the many purchased iTunes movies. Most of which are downloaded to our laptops. I can put them on an external HD if need be. I have read that its NOT ideal to use them from the ATC itself as a storage location for movies as the ATV2 needs a computer to access iTunes and to homeshare.

If you are switching the SIM card this is pretty easy. Copy the contacts from the Nokia to the SIM (consult the manual on how to do that). Then on the iPhone go to Settings > Mail, Contacts, Calendar and tap "import SIM Contacts."

How to view dvr cameras on iPad, How to view dvr cameras on iPad, which need actives control to run

How to install activex control on iPad , so that I can view the dvr cameras over safari ??

You cannot, for the following reasons:
ActiveX requires the Windows (95 - Win7; not Windows Mobile), the iPad uses the iOS operating system
ActiveX requires an 80x86-compatible CPU, the iPad uses an ARM-compatible CPU (the A5)
ActiveX requires an application to host it, there are no iPad applications the host ActiveX objects
Also, generally speaking, modern mobile devices (phones and tablets) rarely permit installing global plug-ins or system software (the ActiveX model for plug-ins). They implement a strict security model that essentially sequesters applications from each other (with some APIs for exchanging some data between applications).
You probably want to contact the vendor of the DVR camera or controlling software and enquire whether there's an app for iOS for viewing the video stream. Vendors of low-end systems may still only support legacy systems (some, for example, still use what is essentially MS-DOS), but vendors of modern equipment may well have an iOS application available. The relative ease of building these applications for iOS makes it a pretty straight-forward thing to do.

How to view Dehydration Store Performance in OEM 12c Cloud Control

Similar Messages

Maybe you are looking for