How to view enhanced postCast
hi there,
I have finally managed to create the enhanced podCast with ChapterTool. Everything worked well and I now have my .m4aE file as well as the .m4a.
However, I don't know how to view it. If I click on it, nothing happens? I tried importing in iTunes, viewing it in quicktime but, nothing works.
And I don't know how to add it in my XML file which have my podCasts. I have looked in the technical specifications and I cannot find anything!
Please help!
Many thanks, Grazi
Hiya it is really easy, rename the file extention to m4b
eg: podcast.m4b
Regards,
Paul
Similar Messages
-
How to view enhanced podcast slides on iPad mini
How can I view slides for enhanced podcasts on an iPad Mini?
It seems it used to be possible but a recent iPad update has disabled the functionality.Thank you for the attempt to help.
I've also downloaded Downcast.
It does show the album cover but it doesn't actually show the slides as they transition throughout the podcast. -
How to save and retrive table column values added via view enhancement
Hi,
I want to enhance standard webdynpro component FITE_VC_REVIEW.
I want to add new column to Fight Info Table and also to Hotel Info table.I can do UI changes via view enhancement .
First Approach: I add new fields to Flight Info and Hotel Info structure.
Create an additional Coolum in Flight Info and Hotel Info Table and Bind it to newly created field in structures.
Question :
What all changes I have to make to save and retrieve values from database table.
Kindly guide with Steps
Second Approach: I create a new table/structure for my requirement and bind table column to these fields.
Question:
What all changes I have to make to save and retrieve values from database table.
Kindly guide with Steps
And which approach will be good.
Regards,
Madhvikano ans yet
-
hi to all!
i have created screen exit for me23 (added some fields in sub screen).. for that i used SAPLXM06 exit ..and when i executed me23 i did not know how to view my own sub screen... anyone help me.Hi Suresh,
Try creating a project using CMOD transaction, assign the enhancement MM06E005 to it and activate.
Regards,
Poornima -
AET : How do I enhance a table structure
How do I enhance a table structure (not just one field), using the AET. Is this possible?
All I have seen so far from you and other blogs (demos) is adding single fields to a header view like that. Now, I would like to add a add custom field (column) to a item list (for eg in a service order) which is a table structure.
Please advise.
Thanks in advance.Hi Satish,
You mean you want to add additional column in result list right?
Please make sure you have below things in place:
1. Add a custom filed to object you want using AET.
2. This field would be added to your structure for context of this view. Make sure that this field is added in view context (In case it is not automatically added)
3. Make sure that this field in present in GET_TABLE_LINE_SAMPLE of your context(which is displayed as table). If not then please enhance this method and add this field.
Your custom field would be displayed in available fields in view configuration. In case it is not then have a look at design layer of the object you want to enhance. This field should be present there (Your functional consultant should help you in adding this field in design layer). Please find my responses on below forum to add field in design layer:
Re: New Column can not be added in chtmlb:configTable
Please let me know if you face any difficulties.
Regards,
Bhushan -
Bridge - How to view image in full screen resolution
In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?
The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge. Maybe I am not following you. Sorry
-
Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
ThanksHi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant -
How to view my macbook pro retina on a iMac late 2009?
How to view my Macbook Pro Retina on a late 2009 27" iMac? Note: Mini DisplayPort won't fit.
Hi rainson,
Here is a list of video adapters and the Mac models they can be used with:
About Apple video adapters and cables
http://support.apple.com/kb/ht3235
This article describes Target Display Mode, which may also be useful for what you are trying to do:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Cheers!
- Ari -
I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.
When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
You can read about PDF/A files in the Help. -
How to view the sql query?
hi,
how to view the sql query formed from the xml structure in the receiver jdbc?You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
Parameter type: boolean
Parameter value: true for any string value, false only for empty string
Parameter value default: false (empty String)
Available with: SP9
Category: 2
Description:
When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek -
How to view errors if bulk collect has thrown errors
Hi,
I have few questions.
1.How to view error whether bulk collect is successful or not
2.What is identified & unidentified relationships in ERWIN
3.How to see the errors whether the sql loder is successful or not
and how to open the log file.Is there any specific command in UNIX
which tells loader is successful or thrown error
4.When executing the pl/sql procedure from UNIX.how to check for errors.
Please provide the answers for this
ThanksUse SAVE EXCEPTIONS clause in your FORALL loop.
Is this for homework/test? -
How to view deski report in html format ?
Hi,
I use BO XI R2. I use jsp.
I just want to know how to view deski report in a html format.
thanks a lot.
hatougSince you're using JSP, please post to the Java support forum:
Java SDK Application Development
or
SAP Crystal Reports, version for Eclipse -
How to view and edit .md file (text file) via Documents To Go app
Could some one please let me know how to view a text file with .md as the file extension using Documents To Go app? If this is impossible, which app do you recommend.
.md is a markdown fileHi,
I believe I have my answer now, or at least a good thread on the subject going hear:
http://forums.java.net/jive/thread.jspa?threadID=45148
Thanks,
Mark -
Hello, can someone help me by telling me how to view my flash drive on an imac? I have it on a port but cant find it even using finder. Thanks!
If you think repeat yourself three times makes your problem clearer?
It does not.
Details are needed.
Allan -
How to view the Users in the Portal Activity Report
Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Muralihi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N
Maybe you are looking for
-
I want to use an external hard drive to store my photos, imovie, music and documents, how can i do....Thanks
-
How to Selectively Transfer apps from my 24" imac to my new 27" imac
How do I selectively transfer apps from my 24" imac to my new 27" imac, both machines use mountain lion and I have a TimeMachine backup of my old imac.I have read the article "How to use Migration Assistant to transfer files from another Mac" but it
-
Lenovo T61 Backlight Problem !
Hi, so i bought a notebook Lenovo T61 last year in september. The model is 6459CTO with a 15.4 WSXGA screen. This is how it shows on the packing list. 15.4 WSXGA- TFT So 25 days after warranty expired the notebook screen died. How **bleep**ty is that
-
Having a wierd connection issue on my MBP. The airport card just keeps losing connection like crazy while surfing the net, but when I stream XM radio from the app, the connection is consistent and doesn't drop at all. What could be causing this? Shou
-
Help! my project is not automatically saving to my external drive!
In the past, Final Cut Pro automatically saved my projects on my external disk. A test project saved as well. Now I'm working on a bigger project and for hours editing and so forth... When I went back to work on it, i could not find it anywhere on th