How to view from work on the internet? WVC54GCA

How do you check it froma website from outside of your network Like when you are at work or another house????
Is there a way?

To access your camera from the Remote Location, First thing which you need to do is, Login to your camera setup page, and on the left side click on the Options tab and you need to Enable "Alternate Port" i.e : 1024 and you need to open the same port on your router. Once done now note down the WAN IP which you will get from the Routers Status tab.
Now open IE and input the WAN IP (http://wanip:1024) and hit enter and it will display you your camera and you can view your camera.

Similar Messages

HT1937 My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

How can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated

how can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated
== This happened ==
Not sure how often
== automatic updates go on my computer, say if i click yes to update when shutting down

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

How to configure Wake On LAN to work through the Internet?

I'm using an iOS app to wake my desktop computer. It works perfectly fine when I'm within my WiFi range. However, when I'm out of my Linksys E3000 access point, it no longer works over the Internet. So, if anyone can point me to documentation that have step by step instruction on how to configure this through the Linksys E3000 access point, I'll be grateful.

Hi ohgosh,
I believe your computer is already configured and has all the requirements for Wake on Lan since it works locally. To do it remotely you need to open the regular port numbers used for WOL like UDP ports 9 and 32767. Your desktop IP address must be set to static because that's what you need to enter on the port forwarding page of your router. You may use this link below for instructions on how to do port forwarding on your router.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9b27a0c1bb9496d8c22d0d55f875ddf_17241.xml&pid=80&...
Another option is to set up DynDNS on your router. With this, you need to subscribe to DynDNS.com. I found some online links that could help you enable WOL remotely:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=3ff9013e9f4f4a0b9d9805b0697407b7_4578.xml&pid=80&r...
http://lifehacker.com/5786791/rule-your-computer-from-afar-by-setting-up-wake+on+lan
http://www.dslreports.com/faq/9389
http://www.teamviewer.com/en/res/pdf/TeamViewer-Manual-Wake-on-LAN-en.pdf
Hope this helps!

My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work?

My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

HT1212 I just bought a used i pod touch from work but the screen says Ipod is disabled, how do i clear that to get back and enter in the passcode

I just bought a used i pod touch from work but the screen says Ipod is disabled, how do I clear that to get back and eneter in the passcode?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How to get Profile Manager working over the internet?

I've set up profile manager at home and it work great on my local network. Now I wanted to make it work over the internet but I can't figure out how to do so. I've already opened the required ports. When I try accessing the User Portal trought my <external ip>/mydevices it asks me whether I trust a certificate or not, but when I choose "ok" it keeps requesting the URL forever until it times out. Am I required to have a registered domain name to access my server or I can just use my external IP ? Is there anything else I should do in order to have it working?

First off, you say you've opened 'the required ports', but which ones are they, in your opinion?
That may sound like a dumb question, but it isn't meant to be. You'll need port 443 to support HTTPS connections, and 1640 for the Certificate Enrollment server.
Additionally, you WILL need a valid domain for this - at least if you don't want authentication errors. SSL certificates rely on the hostname (amongst other things) to provide validation and if you access the site via IP address that validation is doomed to failure. That shoudkn't lead to the problem you're experiencing, which is no response at all, but it's still an issue to resolve.

How do I listen to my home iTunes library at work via the Internet?

I know this question must have been asked before, and if so, I apologize; I did some digging and didn't find anything. I do know that if I could somehow find iTunes 4.0 to install on both my home and work Macs, that I could just access my home library at work over the Internet (though I've heard that could cause an entirely new set of problems). I also have heard that I can use Shoutcast + Audion to create my own music server and access it that way, but programming is not what I would call a strength of mine, and the Shoutcast download doesn't seem to come with the instructions I was looking for, and their site wasn't any help.
Basically, I'm wondering if anyone has a fairly straightforward way to access their iTunes library over the Internet. I supposedly have a dynamic IP at home (the would-be 'server') but I've found ways I can address that (no-ip.com, for instance), assuming my IP does actually change. Could I put my music in my Shared folder and access it that way? Sounds too easy a solution...
Thanks in advance for any assistance.
Mini 1.42Ghz G4 Mac OS X (10.3.9)

The two biggest obstacles to doing this are your ISP, and your network admin at work. If you leave your computer on at home with iTunes running and you have set it to share, provided your own ISP will allow it, and your employer permits you to access your home IP address, you should be able to share the library. Most office networks won't allow outside system access though.

How do i stop my iphone from connecting to the internet and using up my data allowance

Hi do i stop my iphone 3gs from connecting to the internet and using up my data allowance unless i want to.

See Recover your iTunes library from your iPod or iOS device for the first half of the puzzle, the second depends on the other phone.
tt2

How to setup a vpn over the internet

Hi ,
how to setup a vpn over the internet ? Just I have using window server 2012 r2, I already install 'remote access service' also ready enable VPN service but I can't connect to vpn server over Internet(Other network), when I connect from LAN , vpn service
is enable I can connected. My ADSL router also Enable VPN access(PPTP, L2TP, IPsec). But I can't access my server over Internet :'( . What I need to do? Help me please.
Thanks,

Hiya,
Did you have a look at this guide? - It gives you all the steps.
http://www.howtogeek.com/135996/how-to-create-a-vpn-server-on-your-windows-computer-without-installing-any-software/

I can't copy and paste from Word to the Internet (Firefox or Chrome), but I can copy and paste from Internet to Word

I suddenly can't copy and paste text from Word to the internet (Firefox or Chrome, email or other websites), but I can do the reverse. Any ideas? Copy and paste works between Word docs, and it works between internet sites (e.g., web page to email), just not from Word to the internet. Please help. I need to copy and paste my resume for an online job application.

There are a range of different kinds of forms. For example, this site uses very simple controls that don't automatically convert Word's formatting to an online format. The site where you are trying to paste your resume probably works differently.
What methods have you tried using to paste? Typically one of these will work:
* Ctrl+v
* right-click > Paste
* Edit > Paste (from the menu)
Some sites offer their own buttons to paste, but for security/privacy reasons, Firefox usually disables those.

Accessing oracle apps from anywhere on the internet

Hello,
I have oracle apps R12.1.1 up and running on linux 6.3. I have disabled the firewall on linux.
I am able to access apps from windows clients on the same network after updating the host files.
I would however like to access the url form anywhere on the internet.
How can I achieve this?
Please advise.
Thanks.

1006947 wrote:
Hello,
I have oracle apps R12.1.1 up and running on linux 6.3. I have disabled the firewall on linux.
I am able to access apps from windows clients on the same network after updating the host files.
I would however like to access the url form anywhere on the internet.
How can I achieve this?
Please advise.
Thanks.Problem & solution have nothing to do with Oracle,
but involves only Networking Basics 101.
Does DB Server have a hostname & IP# that can be resolved & accessed from anywhere on the Internet?
If so, post those details here.

How to view code of all the custom and complex folder folder

How to view code of all the custom and complex folder folder in EUL?

You do not need to run all the reports.
Also i am not sure about why do you need to see the code of every thing, i assume you will not get much from it.
If there is a certain folder you are interested in then this is the way.
Any way there is no way to get the code of the complex folders since they are logical join of other folders.
to get the code of the custom folder s you can use:
select * from eul_us.eul5_objs t
WHERE t.obj_type='CUO'
AND t.obj_object_sql1 IS NOT NULL;
you should look (and concatenate) at the obj_object_sql1,obj_object_sql2.....
Tamir

Candy crush won't work without the internet but it did before

Candy crush won't work without the internet but it did before

Make sure you have the latest version of QuickTime (7.6.6) installed - if this is missing or out of date there may be no audio output from iTunes (including, but not limited to, playback through Bluetooth devices) or playback may be of poor quality.
Also check iTunes' Play Audio Using setting in Edit > Preferences > Playback (you will have to restart iTunes for any changes to take effect). In most cases selecting Direct Sound addresses playback issues when Windows Audio Session is active (though some users have reported the reverse),
If neither of these solves your problem try installing this alternate version: iTunes 12.1.1 for Windows (64-bit — for older video cards). The "for older video cards" label is a little misleading, as this also fixes some playback issues, QuickTime and Outlook interoperability errors, and problems with other third-party applications.

How to view from work on the internet? WVC54GCA

Similar Messages

Maybe you are looking for