How to view full file name of id3 tagged wavs in finder

Help

http://www.digitaldjtips.com/2011/02/dj-music-files-formats/
Hey there, I don't know if you knew that already. If you did - Welp I gave it a shot. If you don't want to convert files maybe you should look at metabliss.com to help lighten the load. I would definitely make a copy and try it on PC to see if the same issue occurs.

Similar Messages

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. Any ideas?

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. It finds some things, but is not to be depended upon. Any ideas?

Try reindexing spotlight: Spotlight: How to re-index folders or volumes - Apple Support
If you still have problems, open Console app, select All Messages, then search for mds in the search field. Then search for mdworker. See if there are any messages indicating it is having problems with certain files.
You can also delete the index altogether and cause it to reindex with a command in Terminal. I have always assumed the method above will do the same, but I'm not certain. You must run this command while logged into an admin account. Copy the whole line and paste it into Terminal.
sudo mdutil -E /
sudo temporarily elevates your privileges and will ask for your password. When you type it in, there won't be any response in the Terminal. Just type it and hit return.

View full file names of mail attachment titles in MAIL application (Apple)

I often get many attachments sent to me and when I am looking through emails for some reason all attachments show up as an ICON with a shortened version of the name of the file. It is always just the first 10 or so characters of the title and the last 3, which is usually the (.gif, .pdf, etc...)
A lot of what I get usually has the similar titles and only seeing the first few characters is not making things easy for me to find exactly what I am looking for.
Is there a way to view the full file name within the mail and within the application without having to open each file up each time in the APPLE MAIL application?
Maybe there's a way to show all attachments as a list with a smaller icon?
Anything that'll let me view the full title of all attachments would help.
Thanks in advance for any suggestions.
Message was edited by: KennyMac212

I agree it is frustrating and literally just sent the wrong attachment to a customer because I was trying to live with the truncated filename system. I did find this nifty app called Mail Iconizer (http://lokiware.info/Mail-Attachments-Iconizer). It's pretty neat as it lets you control how attachments are viewed as well as pdfs and images (based on size). It's a free unlimited trial and $15 if you want to register so it's pretty inexpensive.

How to get full file name on MAC?

Hi,
In my plug-in, I have to get the full file name of the file opened in illustrator on MAC OS X. The following code works fine:
SPPlatformFileSpecification theFileSpec;
AIErr error = sAIDocument->GetDocumentFileSpecification(&theFileSpec);
theFileSpec.name gives the file name of the open AI File.
But, if the filename is greater than 31 characters (including extension), the returned filename is turncated to 31 characters in the format: {FIRST_22_Characters}#{5_DIGIT_NO}.ai. for example: if the file name is: 3896420_Sports_Football_Training_Top_II.ai
The returned fileName is: 3896420_Sports_Footbal#3240A.ai
Is there any other Illustrator API or a native MAC API to get the actual file name?
Please Help
Thanks,
Hitesh

Hi,
hopefully I am steering you in the right direction, but if I recall, SPPlatformFileSpecification is an FSSpec, have you tried FSpMakeFSRef and seeing if the problem persists once converted to an FSRef?
http://developer.apple.com/technotes/tn2002/tn2078.html
Cheers,
Garvan.

How to view long file names and sort files within folders/projects?

Hello, like so many people here, I am a new mac user, but certainly not computer illiterate. I have been a professional photographer for 10 years and recently change to mac and have been slowly trying to adapt my work flow accordingly.
However I have become increasingly frustrated with Aperture 3 and after reading posts here it looks like I am certainly not the only person. While in my case I am sure it is because of my inexperience with mac systems so any guidance or assistance is much appreciated.
Hopefully my questions are simple. I have been importing my images and re-naming images as I do so. A very simple combination of date, custom name, and counter. However, when I look at the images once the import has completed, they are not in any logical order within the 'project'. I have tried to sort them by file name, orientation, file size, etc, both ascending and descending, but they will not list in the correct order. eg the file '2010-03-09 Lyon France 001', continually falls between '2010-03-09 Lyon France 022' and '....021'.
This has also lead me to a further question. While my file names can generally be read when the image is a landscape format, on the portrait images the file name it too long for me to read the whole name, and I can not find anyway to read the file name, eg browser, split screen, viewer, or full screen.
Im sorry for all the details, and I am sure it is just my lack of experience, so appreciate your help.
PS. On a separate note, I notice on another thread from the frustrated user 'ultratechy' that he got a reply from Tony who stated 'Also after installing any application you should always run disk utility and repair permissions....' Now as I am completely new to mac, I had no idea about this. Any other tips that I should always be aware of? Thanks again.

Thanks for your reply Calx. If it makes you feel better, I am actually a New South Welshman - just living in the sunshine state!
You are correct, I am trying to get my head around a new way of working and thinking, but I suppose it will all become clearer as time goes by. I have re-visited the manual many times, and been doing loads of research online, but just trying to put it all into practice now, so any tips or advice is always appreciated.
At the moment, I am just working with a small part of my library until I do get my head around things before moving onto the bulk of my images. I have my images stored and backed up on multiple external hard drives. I am trying to import my images into aperture from an external drive as I have been slack over the years with keywording, metadata, organising, etc etc, so I figure from what I have read that aperture may assist me with making these time consuming tasks a bit quicker and easier.
I have put a bit of thought into my filing structure, but I am sure that with further use and understanding, this may change in the future, but I hope not. To give you an example of how I am thinking and working - I have used folders for my regular clients, eg, Ray White, and then made another level of folders within 'Ray White' for the date, and then in each 'date folder' I place my projects and name them with the address of the property I have photographed. I select and edit images from each project and place them in albums under each project. Not sure if this is the most perfect structure, but any advice is welcome.
Keywords is always an issue with me. Over the years I have compiled a number of list for each client and each 'type' of photography. For example, real estate images have there own list, I just simply manually add keywords for specific jobs, eg the address and any specific location or features.
Again, advice and guidance always welcome and I would appreciate how you go about these topics? And maybe you can help explain something that I have pre-emted may be a problem, and it may happen when I move onto my larger library, and I am not sure how to explain this as it may show my lack of management previously. When I worked on my PC, I used PS4, Adobe Bridge and Camera RAW pretty much exclusively. For my landscape images for example, I might have 2 or 3 variations of the one images, eg, black and white, sepia, and color for instance. But the file name remained the same, I just stored them in different folders indicating what version of the image was stored there. Now I am thinking that when I import images in Aperture, I will come across difficulties because Aperture will think the I am importing duplicate images because I will in fact have 3 images with the same file name, even though the adjustments I have made to them are different. Is this the case? Will I have to make adjustments again? Will I have to change the name of the files prior to importing? If so, any advice or tips?
Well, I should stop there. Im sorry to bombard you with some much text, but as mentioned, I am new, and finding my feet, so thanks for your time.

File Upload, how to get full file name

Hi Experts,
I have to get the complete file path when I use fileupload UI Element. but I am not able to achive this.
I used a File Upload UI, with filename property mapped to string variable filename and Data mapped to a binary variable filedata.
I tried to get the file name in below ways
1. wdContext.nodefile().currentfileelement.getfilename();
and
2. through modifiablebinary type also.
but in both cases I am getting only the file name, but not the complete path.
Is there any way that I can get the file path.
If I uplod a file in D drive (example.txt),
I am getting the file name as example.txt but I want to get it as D://example.txt
Please help me,
Regards,
Srinivas

Hi
What Stream are you using for read a file ?
InputStream inputStream = resource.read(false);
File filePath = new File(inputStream.toString());
wdComponentAPI.getMessageManager().reportWarning(filePath .getAbsolutePath());
Best Regards
Satish Kumar

Full file name under desktop icon, not a finder window.

Hello, is it possible to have icons/dirs on the desktop display their entire name without ellipses? Don't care about /path.
Thank-you,
Dennis

Try launching "/Applications" > "Utilities" > "Terminal.app" and entering these commands:<pre>
defaults write com.apple.finder FXDesktopLayoutGridCharCount -int 50
osascript -e 'tell application "Finder" to quit'</pre>
Then restart the "Finder" by clicking on its "Dock" icon.
You can try different numbers other than "50" until you find a value that suits your preferences.
Edit: oops, too slow I guess.
Message was edited by: biovizier

How to see document file name with full path when hovering mouse over title bar?

Using PS CS6, Windows 7 x64.
I was under the impression that when hovering my mouse over the document title bar, I would see a tooltip showing the full file name, including the path. This isn't happening and I'm wondering if there is a way to do this. I know I can click File > Save As, or Ctrl+Shift-S to see the full path, but hoving over the title bar would be easier. (What I am seeing now in the tooltip is the file name, % magnification and which layer I have selected. Basically, the tooltip is just showing what's in the title bar without hovering.)
Thank you!
John

Hm, I wonder if it's something they may have enabled only for the Cloud version (I have 13.1.2). If so, I didn't notice the change at the time of the upgrade.
Nope, it's not that - I have a virtual machine for testing with 13.0.1 installed... This is what I see there:
-Noel

Full file names on Desktop Icons

coming from 10.5, all of my desktop icons revealed the full file name. under the icons. Now on 10.6.2, they are "..." abbreviated. I've looked everywhere and through the "Show View Options" by right-clicking, it only allows me to choose between showing the file info (like size), but not the full names.
Is there an option somewhere to address this?
Thanks!

Set the grid spacing wider in the view options (View menu, Show View Options).

In mini bridge, is it possible to view the file name and the rating at the same time?

Hello,
In mini bridge, is it possible to view the file name and the rating at the same time?
Thank you.

if you know when a new image arrives and you can retrieve that new image file name ...
Well, that's precisely my doubt, how can I know the file name? Is there a property/method for it?
function loadImages() {
for (var i:int=0; i<imagesNames.length; i++) {
var imgLoader:Loader=new Loader;
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,imgLoaded);
imgLoader.load(new URLRequest(imgPath + imagesNames[i]));
function imgLoaded(par:Event):void {
trace(par.target,par.target.content,par.target.content.name);
Output window:
[object LoaderInfo] [object Bitmap] instance160
[object LoaderInfo] [object Bitmap] instance159
[object LoaderInfo] [object Bitmap] instance161

How to get full file path while uploading a file in flex Applications

How to get full file path while uploading a file in flex applications.
FileReference Object is giving file name and other details but not the actual path.
Is there any workaround to to get the file path?.
Thanks

Why not ask in the Flex forum; it is more likely that someone over there knows.

What causes the full file name to be listed with bookmarks?

Good morning! What drives RH to list the full file name in
bookmark code in some files, and in others its just the
href="#bookmark? If you change the file name...all the bookmark
links with full file names break. Am I doing something wrong when I
created them...? Not sure how that's possible...but something is
driving this! Any helpful hints from the masters online?

Hi Teri
It's been my experience that if you elect to create a link
from inside the topic to a bookmark, and you choose the bookmark
from the dialog, you end up with a link that simply has the hash
and the bookmark (#Bookmark).
Where you see the file name preceding the hash and the
bookmark, odds are the link was created by the user clicking the
bookmark in either the Project Manager or the Topic List and
dragging from there to create the link. When links are created in
that fashion (I'm addicted to creating links that way myself - it's
like crack to me - if I knew what that was like LOL) RoboHelp
creates the link with the file name (FileName.htm#Bookmark).
Cheers... Rick

How to create logical file name

Could some one tell me how to create logical file names in BW , and when to use the transaction SF01.
Thanks

The following describes the procedure for creating a cross-client definition using the transaction FILE.
You create the client-specific definition in the same way using transaction SF01.
1.Call transaction FILE for cross-client file names.
2.Double click the dialog structure Logical File Name Definition, Cross-Client.
You access the screen Change View "Logical File Name Definition, Cross-Client": Overview

When i search for mp3 files spotlight shows id3 tags instead of filenames as it used to do !!! I DONT want that .. how can i disable it !!!!!???????

when i search for mp3 files spotlight shows id3 tags instead of filenames as it used to do !!! I DONT want that .. how can i disable it !!!!!???????

Sorry, my handful of mp3's had the file name as the id3 tag name.
So, I am seeing the same thing as you.
Oddly, a while back I was trying to help someone out in Mountain Lion that wanted to see the id3 tags in the Finder.
It's all a bit silly. They should have added columns instead or changing it to tag song name.
They are transitioning to having everything reflect the content and not the file system, so this may not be reversible.
The best I think you can do is provide feedback: http://www.apple.com/feedback/macosx.html

How to print the file name in sap

Hi All,
I have requirment like,
there is a folder in my local system, inside that folder there are 10 Excel file like file1.xls,file2.xls..............file10.xls
how to print the file name of all these file in SAp like
file1.xls
file2.xls
file3.xls
file4.xls
file10.xls
Appropriate points will be rewarded.
Thanks in Advance
Arun kumar

Hi,
Still you are facing any problem with this code expalin the problem with details , otherwise close this thread.
Use Method cl_gui_frontend_services=>directory_list_files to read file names for a given directory
after reading the files then Use FM : RSPO_SX_OUTPUT_TEXTDATA to create spool from internal table data and print the data.
sample code :
data: desktop_dir type string.
data: ifiles type table of string.
data: xfiles type string.
data: count type i.
data: filepath type string.
call method cl_gui_frontend_services=>get_desktop_directory
changing
 desktop_directory = desktop_dir .
call method cl_gui_cfw=>flush.
call method cl_gui_frontend_services=>directory_list_files
exporting
 directory = desktop_dir
* filter = '*.xls'
 files_only = 'X'
* DIRECTORIES_ONLY =
changing
 file_table = ifiles
 count = count.
DATA : x_name LIKE tsp03d-name,
 x_dest LIKE tsp03d-padest VALUE 'LOCL',
 x_rows LIKE sxpcklsti1-body_num VALUE 0,
 x_startrow LIKE sxpcklsti1-body_start VALUE 1,
 x_pages LIKE rspotype-pages VALUE 1,
 x_pages_1 TYPE p DECIMALS 2,
 x_rqtitle LIKE sxpcklsti1-obj_descr,
 x_rqcopies TYPE i VALUE 1,
 x_rqowner LIKE trdyse01cm-username,
 x_immediate LIKE pri_params-primm VALUE ' ',
 x_rqid LIKE tsp01-rqident,
 i_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 x_pages = 1.
 x_rqowner = sy-uname.
 x_dest = 'LOCL'.
 x_startrow = 1.
 x_rqcopies = 1.
 x_immediate = 'X' .
 CALL FUNCTION 'RSPO_SX_OUTPUT_TEXTDATA'
 EXPORTING
* name = x_name
 dest = x_dest
 rows = x_rows
 startrow = x_startrow
 pages = x_pages
 rqtitle = x_rqtitle
 rqcopies = x_rqcopies
 rqowner = x_rqowner
 immediately = x_immediate
 IMPORTING
 rqid = x_rqid
 TABLES
 text_data = i_contents
 EXCEPTIONS
 name_missing = 1
 name_twice = 2
 not_found = 3
 illegal_layout = 4
 internal_error = 5
 size_mismatch = 6
 OTHERS = 7.
 IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Regards
Appana
*Reward Points for helpful answers
Message was edited by: L Appana

How to view full file name of id3 tagged wavs in finder

Similar Messages

Maybe you are looking for