How to view history status of a Network activity of a WBS element

Hi,
Which transaction can I use to view history of a Network Activity on a WBS element? I want to know when were changes made on an activity, e.g. when it was REL or TECO etc, and by whom.
Thanks.
PS_PS01

YOu can get the same in all the PS Transaction where you can get the disply of user & system status. The prerequisite as Ahmed Pointed out you must have ticked on change document and atleast ordstatchange and opstatchange ticket ( for the ordertype and Plant  combination )
If the same is done than you can check as below,
check in CJ20n > Click on any of activity> click on Blue ( Status Icon )>Extra>Change Document -->All.
System will disply the status( User  & System ) change history of that activity.
With Regards
Nitin P.

Similar Messages

  • How to block status profile in Network Activity

    Dear All,
    Is there any way to block status profile in network activity? Is it possible block base on network type / network profile?
    Cheers,
    Nies

    Hi,
    we can block the status profile by using network type. Define your own order types in txn kot2_opa.same will be displayed in txn opsc with out status profile. assign the same network type in network profile.
    regards,

  • How to do budgeting at activity level and WBS element level in project syst

    Dear GURU's,
    Can any one please suggest me how to do budgeting at activity level and WBS element level in project systems, friends please I required set by step process.
    I need how to do this configuration to map this scenario.
    Regards,
    Bhanu

    Hi Bhanu,
    Use this link :
    http://help.sap.com/saphelp_45b/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
    after page opens , click on BUDGET MANAGEMENT , There you will find each and every step you want .
    Thanks ,
    Dhruv Kumar Malhotra

  • How to view history of web seach?

    I was viewing things on my phone while waiting in the doctors office and didn't save any of it.  I know want to refer back to something I read and can't find it.  Does anyone know how to view the internet history on the iPhone 4s?

        Hamann7869,
    We can help you go through your Safari History to find that page! Simply open your Safari browser and tap on the blue icon that looks like an open book (second icon from the right at the bottom of the screen). That will open your Bookmarks, and you will be able to view your History from there.
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • How to view MAC addresses on the network?

    I can log into other non-apple routers via browser and see a list of MAC addresses of equipment connected to the network, but I don't see how to view them if using my Airport Extreme and going in through Airport Utility.
    Any thoughts?

    If It's the same Mac that can see the PC, it's already set up correctly. Something must be wrong somewhere.

  • [Mac OS X] How to detect media status of a network interface?

    Hi
    I'm looking for a way to see the status of a network interface, both wire and wireless, in Mac OS X. The older OS X version to support it the better.
    I'm not any experienced Mac developer so forgive me for not knowing my way around in development for this platform.
    In plain English I want to detect in programming (language is C) if the cable is plugged in or not. In wireless environment it means if the computer is associated to a wireless network.
    It should not depend on if the computer has an IP-address, just the media status.
    It would be good to see how many interfaces that are connected but just getting the answer to question if there is any (real, not loopback) interface connected would be good enough.
    When searching on internet I found people using 'grep' on the output from 'ifconfig'. As I'm not doing a shell script I don't like a solution where I would call 'ifconfig' and take the output back into my program.
    The most promising part I've found is in Core Foundation, the CFNetDiagnostics. But it seems to operate on a higher level (streams?), which is not what I want.
    If any of you are familiar with windows development I found the IsNetworkAlive function in SENS API, http://msdn.microsoft.com/en-us/library/aa377522.aspx
    It is something similar to that is what I'm looking for.
    The program in question is a Java application but Java is very bad at low level network programming so I have to use native interface to windows and OS X.
    Thanks in advance
    Christer

    Update:
    I found SCNetworkConfiguration.h
    http://developer.apple.com/documentation/Networking/Reference/SysConfig/SCNetwor kConfiguration/index.html
    Seems to fit the description, do anyone agree?
    Basically I have to get all the interfaces, then for each one list its active media options and see what I find.

  • How to view history in oracle database?

    hi..
    is there any method to view history of sqlplus command in oracle database ?.
    This is because i would like to know what my vendor done to the oracle..
    Thank you,
    baharin

    This is because i would like to know what my vendor done to the oracle..Interesting enough.
    There is no direct method to view the commands executed from SQL*Plus.
    If that sqlplus session was launched on Windows platform AND the command window buffer was already set to a higher value AND you have not yet closed that command window then you can launch sqlplus again in the same window and go through the history of commands.
    Else, you can try mining your archive logs (assuming your database is in archive log mode), find out the commands executed from that particular session and hope you get all of them (as some commands are/were not supported by log miner).

  • How to view the Users in the Portal Activity Report

    Hello,
    Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
    Please explain me in detail how to view the Report.
    Thnx in Advance
    cheers,
    Murali

    hi,
    You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
    Do see the documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
    Weblog :Portal SP9: Portal Activity Report
    Regards,
    Ganesh N

  • How to generate external network number based on WBS element number

    Hi all(experts)
    I am new to PS and I have a requirment.
    <u>To derive network no. from WBS identifier.</u>
    Enhancement is CNEXOO12
    Function module is EXIT_SAPLCOKO_002(data transfer for Network number).
    I wnat to know how to use the above enhancement to generate external network number based on the WBS element  number. We have to take the Project number and extract the part of the name from it and then assign it to NETWORK and ACTIVITIY under it. The above also depends upon the project type.
    Please let me know the fields\structures\tables that are needed and available during runtime in this Function module exit. If possible with some examples.
    Thanks for your time.
    SH

    Hi Karthik
    Thanks for sending me the table relations.
    Can you please help me with the following.
    1) Can you please expand the table relations with an example because when I am doing a relation I am not able to get the AUFNR fromAUFK-->PSPEL because the there are four levels of WBS in the Project and if I plug the first level WBS from the PRPS there are no table entries found. if I put directly the WBS(fourth level X-yyyyyyy95.xxxx10.10.2) in the AUFK-PSPEL table it works and I get the AUFNR.
    2) Can I do retrieve the network number from the sales order(KDUAF).
    Please suggest.
    By enhancing this CNEX0012(EXIT_SAPLCCOKO_002) which transactions in PS are affected.
    Please reply at your earliest.
    As always thanks for your time and your help
    SH.

  • How to view customer report in fi and activated new gl

    Hi Friends,
    can u please explain the how to view customer report normal we can see fbl5n
    but here activated NEW GL please tell the tcode and path and how see.
    Thanks,

    After New GL implementation also we are using the Customer Line item report as FBL5N
    Balances - FD10N
    The below are few reports
    S_ALR_87012167 - Accounts Receivable Information System
    S_ALR_87012172 - Customer Balances in Local Currency
    S_ALR_87012186 - Customer Sales
    S_ALR_87012169 - Transaction Figures: Account Balance
    S_ALR_87012197 - List of Customer Line Items
    S_ALR_87012174 - List of Customer Open Items
    Tables: BSID, BSAD,
    Thanks

  • How to standard network / activity and std wbs to operative project

    dear all,
    i want to include a standard network that has assignments to standard WBS elements. However, to assign std network from templete area i got dialog box (include standard nework) which contains:
    (You want to include a standard network that has assignments to standard WBS elements. However, the selected WBS element does not correspond to the standard WBS element.)
    in below the above message there are 2 button i.e.
    1. Copy Assignment
    2. Ignore Assignment
    in both the above button selection i am not able to bring assigned (std WBSe).
    After all my finding i am not able to bring activity assigned WBS elements. Kindly help and provide information to resolve the problum.
    saqib usman

    done

  • Assign activity type  to WBS element  without network

    Hi There,
    I have a customer business scenario where I have to assign activites to WBS element  without network.
    can any one help me on that..
    Thanks,
    Paritosh

    Hi Thomas,
    Thanks for your information. I have created customer Project with one network and multiple WBS.
    But another issue related to project RBB & DIP profile. I have a scenario it like quantity should be updated from DIP profile in quotation and billing price should take from sales condition record.
    After booking activity base cost directly from KB21N and it is showing in line item. Still when I am trying to run transaction with DP82 to update sales base price system is giving me a message "No expenditure item found" although in WBS level showing all the cost/quantity.
    Can any one tell why I am getting message and how to correct it?
    Paritosh

  • How to capture the different sold-to party for a single WBS Element

    Hello,
    The client wants to automatically populate the Partner field in the WBSE. The Sold-to party that is indicated in the Sales Order will be the same with the Partner Field in the WBSE. I would like to ask regarding on how can we capture the different sold-to party for a single wbs element, since in our project there is a system constraint where it is not possible to have multiple u2018sold tou2019 rows assigned to partner field in the WBSE.
    Hoping for your suggestions and comments. Thanks in advance.
    - Irica
    Edited by: Irica Vaile Dalisay on May 25, 2011 3:45 PM

    Try using the Customer Enhancement

  • How to view password of known WiFi network

    How do I view list a of known WiFi networks on my iPhone? Also how do i check the password that was used for those known Wifi networks? It's easily done on OS X but how is it done on iOS devices?

    You can't.  That's not a feature of iOS.

  • How to view websites visited on my network

    Is there a way to view a log of all the websites that have been visited in my house, since all internet connectivity is directed through the router?

    A browser will cache that info. so you can extract it from the computer by remote access.
    However as Bob says.. Apple routers are useless for anything beyond the very simplest of network functionality..
    I strongly recommend you use a gargoyle router.. this means buying a cheap router like WNDR3800 older model Netgear or DIR-835 which is a current model D-Link and use them after flashing the firmware.. simple upgrade just like a normal firmware.. to gargoyle.
    You can then put the Airport back as AP and switch.
    The reason for this recommendation is the design of this firmware is 3rd party of course because manufacturers of equipment simply cannot understand parents needs for this info or understand how to display it simply.
    There are limits of course as this uses up large volumes of RAM.. I have set much higher limit than usual 300 or 500 sites.. most are tiny links embedded and it is hard to track through them. I can post a screenshot of what it looks like.. but apple will delete my post if I tell you where to find Gargoyle.. so use google to find it.. taint hard.
    Here is about 2min of output with half a dozen websites open.. so this is going to grow huge..

Maybe you are looking for

  • FOR ANYONE WHOS IPOD WILL NOT APPEAR IN ITUNES NO MATTER WHAT YOU TRY!

    Hey Guys i suffered from this problem for a frustrating three weeks before i tried somthing completely random and it fixed my problem. My ipod would appear in mycomputer and itunes would even open when connecting my ipod but would not appear in the m

  • ITunes Diagnostic Doesn't Find Audio CD or iPhone/iPad - Help!

    I I’m having issues with iTune to recognize my iPhone and iPad.  My iPod nano (G5) is recognized.  I’ve run diagnostics with two failures (No Audio CD Found, and No iPod, iPhone, iPad connected).  A month ago everything was working.  What happened? 

  • Make payment before issue sales order

    Dear all, Here is my problem. After customer agreed on the sales quotation, I had to collect payment from customer before issuing a sales order. How can it be done in SBO? i tried AR reserved invoice but sales order had closed after adding AR reserve

  • Leading zeros still deleted after applying note 1113276

    Hello We are experimenting some issues with the automatic replenishment and we do not know if we are filling in the necessary fields in the material master. our goal is to forecast consumption based on the historical values, the chosen model is the m

  • Performing searches and scrolling within a report using Plus and Viewer

    Hi All: In Discoverer Plus and Viewer, is there a way to do searches within a report? Also, if I have a report that has multiple pages, as much as I can adjsut the row number, is there a quick way to get from the beginning to the end of the report an