How to view internal order,Business area wise?
Hi experts,
as u know,we are creating internal order under a business area.
Now my problem is,when i am trying to view internal orders in KO03 ,business area wise,its showing me all the internal orders and B.Area is not showing dide to that.
Any other T.CODE available to view internal orders Business Area wise?
Plz suggest.
Regards,
Sumeya Offrin
Thank you kalyan,
It really helped me upto some extent.
In KOK5,i created a new varient and able to view internal orders B.Area wise but i am missing some internal orders which are available in KO03.
Suggest any alternative solution.
I ll appreciate for the quick response.
Regards,
Sumeya
Edited by: sumeya offrin on Mar 4, 2009 11:07 AM
Similar Messages
-
How can i finf internal orders,Business area wise?
Hi experts,
As you know,we are creating internal order under a business area.
Now my problem is,when i am trying to view internal orders Business area wise in KO03,its showing me all the internal orders and B.Area is not showing side to that.
Any other T.CODE available to view internal orders Business Area wise?
Plz suggest.
Regards,
Sumeya OffrinHi
Use TCOD KOK5 and maintain the variant for Business Area & IO.
Thanks
GG -
Can i view customer report as per the business area wise , region-wise how?
can i view customer report as per the business area wise , region-wise how?
Hi,
You can view the report business area wise, extract the report and go to dynamic selection and selection business area. When the report is display just sub total on business area. System is showing report as per your requirement.
Regards,
Pankaj -
I want Business area wise Purchase order
I want Business area wise Purchase order
How I can get these types of output
1. When I create PO in ME21N without account assignment
(i.e. Business area is not defined here)
2. When I create PO in ME21N with account assignment (i.e.
Business area is defined here) So I can PICK up BA from
table EKKN with respective PO
But at the first case I did not find BA in EKKN with respective PO.
In IMG we assign BA to plant (it is maintenance view V_134G )
So my requirement is that Business area should be picked from plant entered in PO.
So Experts What to do???Dear Friend,
Now i am facing the same suituation. The requirement is Business area wise Purchase Order Details.
you have mentioned that you solved the problem.
Please Guide Me.
Urgent Requirement.
Advance Thanks.
P.Ravi Shankar. -
How to run depreciation business area wise
Hi,
pls tel me how to run depreciation business area wise .
Regards
GirishGirsh,
For depreciation you have to set up:
Integration with the General Ledger / Additional Account Assignment Objects/
Activate Account Assignment Objects
Like
CAUFN Internal Order x
EAUFN Investment Order x
Specify Account Assignment Types for Account Assignment Objects
Like
CAUFN Internal Order * Generic Trans. Type Depreciation Run x
KOSTL Cost Center * Generic Trans. Type APC Values Posting x
KOSTL Cost Center * Generic Trans. Type Depreciation Run x
In your masterdata from the asset you have to fill in a costobject like costcenter.
Paul -
How to run automatic payment program business area wise
dear all
please let me know how to run automtic payment program business area wise.
for example business area 2020 we want to make payment business area wise.
what are the back gorund settings for congigration Tc- fbzp
wht are the configrations forTC- f110
regards
babuHi,
You can make payments business area wise if you had ticked payment goup business area wise in the payment method in company code screen. However you will have to give company codes in the payment parametets, but payments will be grouped by business area.
Thanks,
Ramesh. -
How to update the posted documents with Business Area wise
Dear experts
Please suggest me how to update the posted documents with Business Area wise
Ajeesh.s
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Nov 2, 2011 2:26 PMHi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West -
HOW TO SEE VENDORS , BUSINESS AREA WISE
HI,
HOW TO SEE VENDORS BUSINESS AREA WISE
Regrds,
Rajeshhi
goto TC:FBL1N give vendor number &company code , select all items & click dynamic selections on screen(near excute button see). in that dynamic selections give the business area(scrool down), next excute so u can saw the
particular business area vendors items.
plz assign points if it's useful
regards
sivareddy. -
Restriction of S_ALR_87012172 business area wise
Report S_ALR_87012172 - Customer Balances in Local Currency is working fine. but how it can be restricted on business area wise in order to recoincile the same.
anyaDear Anya,
May I know which version are u working on?
Try S_ALR_87012169 - Transaction Figures: Account Balance . Thru dynamic selection select BA & restrict ur report per BA.
Regards,
Ajay -
Business Area Wise Payment in F-53
Hi Frnds.,
We are using ECC 6 and have document splitting functionality active. I have created an invoice using FB60, with debiting 2 exps belonging to 2 Business Areas and crediting one vendor. In the GL view, two vendor line items are generated for 2 Business Areas debited and in entry view there is only one vendor line item credited.
And I wanted to make the payment to this vendor using F-53, but for only 1 Business Area. But in F-53, I am not able to make the payment to this vendor Business Area wise, as only one liability line item is generated for the vendor. When i make the setting in the line layout at the top and put Business Area field in F-53, it is keeping blank against such invoices (which are having 2 Business Areas) and not generating 2 line items.
So how can i make payment in this scenario Business Area wise ?Dear,
Just remember one thing document splitting is only for reporting it just breaks the document line item beyond company code. And you cant do the payment/clearing activity based on it. In your payment F-53/clearing it will pick only the invoice line item of the vendor and not the debit items of your expense.
Document splitting will split the document based on your splitting charatersitics, like profit center or segment or business area. -
Business Area wise Balance Sheet
Dear Experts,
Our requirement is to get Balance sheet business area wise in ECC 6, I have done necessary configuration and the report is coming Balance sheet and Trial Balance is coming Business area wise.
But we are having following problems
Let me take an example of Procurement process
Purchase order NO EFFECT ON FI
MIGO
Stock dr.
To GR Clearing A/c Cr. System is not Picking Business Area on Good Receipt
Miro Invoice verification
GR Clearing Dr.
To Vendor A/C Cr. system is picking BA and it is working fine
Please Suggest me steps how I can Pick Business Area at the time of Good receipt
Thanks for your time
Regards
Lakhbir SinghHI,
if you post a MIGO entry with a goods movement on stock, the material number used has a material master. Based on the material master information for this material (plant, division) you can customize in OMJ7 which business area is derived.
Check this and come back if necessary.
Best regards, Christian -
Difference of balance in balance sheet report & Business area wise report
Dear Group Members!!
In my company user wants to generate Business are wise Report
Difference of balance in balance sheet report & Business area wise report from same t code
Balances are different if enter business area, & if I execute the report with out entering any business area. Transaction code S_ALR_87012284 - Balance Sheet / Profit and Loss Statement.
The difference amount to be considered as data entry made with out using business area?
How do I rectify this?
Your comment will be helpful for me
ShamulheqHi Shamulheq
While working with business area you must first recognize that they are not company code dependent and can be used cross-company. Also depending on the SAP release you are working with postings to Business Area may not 100% guarantee, since there are cases where rules or standard SAP is not available and line items posted will be carried out without BA. For SAP releases not using the NEW GL, the setting up of adjustments accounts and monthly execution of adjustment programs would provide the vehicle to relate and adjust any missing BA at B/S and P/L level. If you are using NEW GL the document splitting would help to set the rules where every single line item would get a business area.
I assume that you are using the classic GL. The execution of T code S_ALR_87012284 - Balance Sheet / Profit and Loss Statement without business area retrieves all posting entered for any given company code regardless the account was posted with or without business area, this can be clearly displayed when you select the radio button for Classic Navigation. If you filter by Business Area, then the report will isolate the output data accordingly (The balances should be smaller). When using the classic GL you have to make sure that the financial statement version you use to execute the report, includes that the technical (Adjustment accout) account(s) that is used for the adjustment programs, so the correction to buisness areas is also included.
In conlcusion I think you have to make all this considerations, in order to better understand where the differences come from.
Hope this helps.
GG -
Business Area Wise Number Ranges
Hi All,
Can you please guide me how to maintain Business Area wise Number Ranges for Vendor and Cust Payment , FI Invoices and other Fi documents.
Regards,
JavedHello,
Number ranges cannot be maintained per business area.
Number ranges are created at company code level. Please see transaction code FBN1
You can create number ranges year dependent or year independent
You can create number ranges external or internal
You assign the number ranges to document type in OBA7
One document type can have only one document number ranges. Whereas, a single number range can be assigned to one or more than one document type.
Regards,
Ravi -
Business area wise opening balance of customer.
Dear Guru's
How to get the opening balance of Customer account, Business area wise. I have to prepare report on cutomer account balance based on business . I am getting the balance on the basis of company code from KNC1 table.but I am not able to get balance based on business area, can any body help me... it is Urgent
With Regards
MaheshDear Madhuri
That i know, but i need to prepare a report, customer details based on Business Area for that i need to get a opening balance of customer based on business area.so i needed from which table i will get the balance of customer based on business area.
Please help me yaar....
it is urgent.....
thanks for ur replay
i am expecting a good solution from You.
With Regards
Binoj -
Automatic postings r not updated thru business area wise like dep.run tax c
automatic postings r not updated thru business area wise like dep.run tax code also......how to updated this....
my client requirement.....plz halp meHi
Business area updations will not get updated through automatic postings like tax line generations, etc. You will have to search for some note for updations. Otherwise while preparing blance sheets for business area, you can make adjustment postings.
Regards,
Maybe you are looking for
-
Video as a whole isn't synced like the scenes suggest
I'm VERY close to finishing my flash project. However, I have two seperate scenes that, when I test them, work fine. However, when I publish a preview to see every scene back to back, the audio is at least 3 frames out of sync with the animation when
-
Loading an external swf with a loader
I have a .swf that loads different external swf's into loaders based on what frame it is in. For all but one frame this works fine. There's no lag, they load quickly and can be interacted with with no problem. But, for one .swf it gets really choppy.
-
Document printing ignoring posting date range
I am in Banking/Document Printing and selected my bank account, doc type = checks for payment, print checks = to be printed. Posting date from/to fields = 2/1/09 - 2/28/09. I click the OK button and the results show me 2 checks with 3/13/09 posting
-
CS 5 InDesign can't get the tutorial to work
I'm new to CS5 InDesign. I want to do the tutorial but when it tries to load it says I need an updated version of "Flash" I have uninstalled flash and reinstalled several time. The version that I downloaded is version 10.2.159.1 But when I check on
-
I have OSX Tiger 10.4.11 with iphoto-6. I can sync music and applications and my address book from itunes but not my iphoto album. I get "unknown error (-50} in a window .why is this? it let's me sync photos from from my picture folder but not iphoto