How to view iStat Pro info

I installed iStat Pro as a widget but when I open it the temps section only shows a few of the possible readings. How can I get it to expand so that I can view all of the memory module temps? I've looked around in settings and looked at the manual but it doesn't say how to make the view show more information. Thanks for any advice.

Click on the small i on the left hand side and then click on the display tab. Choose what you want displayed and then click done.

Similar Messages

How to view multiple files' info in a single window

I remember I can view multiple files' info in a single window before, but now I have to viewed multiple files' info in each their own window. It's very inconvenient to me, I want to get a solution to resolve it. Please do me favor, Many Thanks!
Message was edited by: 5imacintosh

Select them and press the Option, Command, and I keys at once. The resulting window will change its content based on the selection.
(45010)

How to view my pro*C reports on the web with forms10g

Hi All,
I have a scenario where :
I just migrated my forms from forms6i to forms10g. My IDS 10g R2 sits on Windows XP machine through which I build my form. My IAs 10g R2 sits on Linux machine throught which I compile my forms. Lot of my forms uses pro*C reports which I want to display on the web. I'm using host command in my forms. My questions are :
1) Do I have to use webtuil?
2) Is my pro*C reports needs to be ftp into my windows machine or I can still run it even though they sit on linux machine.
3) How can i dsiplay my pro*C report on the web?
regds
Lasily

Greetings anandhi108,
After reading your post, it sounds like you are experiencing an error with the Photos app on your iPhone. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD

How to view my macbook pro retina on a iMac late 2009?

How to view my Macbook Pro Retina on a late 2009 27" iMac? Note: Mini DisplayPort won't fit.

Hi rainson,
Here is a list of video adapters and the Mac models they can be used with:
About Apple video adapters and cables
http://support.apple.com/kb/ht3235
This article describes Target Display Mode, which may also be useful for what you are trying to do:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Cheers!
- Ari

How to view the settings of the sequence (info that appears when you first open sequence)?

Hi I would like to ask how to view the current settings of the sequence i am already working in, the same information that appears when you first open a new sequence
eg.
General
Editing mode: QuickTime DV PAL
Timebase: 25.00fps
Video Settings
Frame size: 720h 576v (1.4587)
Frame rate: 25.00 frames/second
Pixel Aspect Ratio: D1/DV PAL Widescreen 16:9 (1.4587)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Audio Tracks:
Audio 1: Standard
Audio 2: Standard
Audio 3: Standard
I have forgotten which setting I chose for my current sequence and have tried to look under project settings and also sequence settings
but the info that you see when you first open a new sequence doesn't show, especially if the editing mode is PAL or NTSC etc.
How can I find out this information that my current sequence is on?
Thanks

Thanks for your reply
Is there a way to see what preset I chose when i first chose the sequence? As under 'sequence settings' i don't see this info.
e.g
DV PAL "Widescreen 48kHz"
As i do not remember and fear it may ruin the HD video I am currently editing.
Thanks

Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

Is the disk cache and the memory cache enabled?
You can check these prefs on the about:config page.
* http://kb.mozillazine.org/browser.cache.disk.enable
* http://kb.mozillazine.org/browser.cache.memory.enable
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r85
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

How to view windows Xp formatted hard drive with Macbook pro without losing data

How to view Windows Xp programed Hard drive with Macbook pro with out losing data on hardrive

Go to the First Aid tab in Disk Utility, select the external drive partition and read the format from the lower left, at the bottom.

Bought 10 gb Uploaded Iphone and IPad2, left with 2gb space. How to view pictures and other info in ICloud?

Bought 10 gb Uploaded Iphone and IPad2, left with 2gb space. How to view pictures and other info in ICloud? Can I upload documents from my desktop (Windows os)?
Thanks.

If you backed up your iphone to icloud, then there's a chance that doing a restore might bring back your photos. I say "chance" because many users have tried that (assuming they had photos turned in for backups in settings), but ended up not getting back any photos. If that happens, then they are gone.
Remember, you should have been syncing photos all along to a computer for archiving. Don't trust the pictures to an icloud backup.

Since Prelude doesn't work with Red footage, how can I add logging info to a file in Premiere Pro

Since Prelude doesn't work with Red footage, how can I add logging info to a file in Premiere Pro CS6?

RED footage has a restriction on metadata. We are looking into what it would take to get full metadata support into our system, but you cannot tag red footage at this time.

How to view page info other then right click mathod

how to view page info other then right click mathod

I'm not sure exactly what you are after but if I remember correctly Fx3 Tools menu has "Page Info" with information the same, or at least similar, to that in '''the-edmeister''''s method.

I have an ipad2 and have itunes on it. I am trying to view my account info but it looks like i can only see my "purchased" items. How can i see my entire account info from my ipad? Thanks.

can I view full Apple account details from a mobile device? Thanks

You can view some account info by tapping on your id in Settings > Store and selecting View Apple ID on the pop-up - is that the info that you want to see ?

How can I view itunes account info for many DRM songs at once?

I have a ton of songs on my computer that is from different accounts. They are all in one folder but the problem is I would like to sort them into different folders by account. I know you can view the account info in itunes on each song one by one, but is there a way to add a column for account email address associated with the songs? There is to many to click each one individually.
Thanks

I just tried the instructions you posted and they worked for me. What happens when you try? What are you trying to change?

How do you update iStat Pro to the Snow Leopard version?

Went from 10.5.8 to 10.6.1 - do i need to do anything to iStat Pro?
Thanks.

Only with iStatMenus or MenuMeters. You will need to download the updates for them. iStat Pro is a widget so it still works with Snow.

IStat Pro Battery Health 100% No Way!?

iStat Pro seems to be functioning correclty I have removed and reset it, but I continues to display 100% Battery Health. It also says I am 123 Cycles in, and I have had this laptop for some time now.
1. More then likely this is not the correct information, but how do I get this widget to display the correct info?

islayer.com states...
"What is battery health?
This is a comparison between your current battery capacity and the capacity of it when it was new. For example, if your battery lasted 5 hours when it was new, a figure of 50% suggests you should get 2.5 hours out of your battery now.
As you can see, battery health isn’t something you have control over and there’s not much you can do to change the figure without buying a new battery. Don’t worry about it though, it just means that your battery doesn’t last as long as it used to."
My System Profiler States...
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 5356
Remaining Capacity (mAh): 5356
Amperage (mA): 133
Voltage (mV): 12590
Cycle Count: 126
iStat Pro displays 100% Battery Health. How is this possible with almost a year of solid use and 126 cycles.

IStat Pro - Which 8 Temps?

I didn't want to hijack wallenfox's post, but he was inquiring about an unusually high temperature on the power supply - 95 C. Then rkaufmann87 asked how to get the power supply to display its temp in iStat Pro. George Peters said, "iStat Pro can only displays 8 temperatures at a time and by default the Power Supply temp is last on the list so you have to go into the settings under Display and Temps. You can check the ones you want to show up." I am wondering which 8 temperatures are the most critical and should be selected for display. I am not a gamer and never run such as World of Warcraft, etc. if this matters in the selection of the 8.

It really comes down to preference. If you want my opinion the most important temps to watch are the HD, Power Supply, and GPU Diode. My iStat list goes like this:
HD
CPU A
Ambient
GPU
GPU Diode
HD Bay 1
Optical Drive
Power Supply
Now depending on your situation you might want to change the order of things. For instance if you are using a wireless connection you would want the Wireless Module in the list. Also if you like to monitor your temps have a look at Temperature Monitor. Its nice because it displays all the temps in your Menu bar and allows you to set up temperature alarms.
Examples:
http://ftp.georgetek.com/George/Temperatures/iMac2.33/TempsNormal.png
http://ftp.georgetek.com/George/Temperatures/ALU2008_iMac_2.8/TempsNorm.png
http://www.macupdate.com/info.php/id/12381
George

How to view iStat Pro info

Similar Messages

Maybe you are looking for