How to view large images ?

i just updated my phone c601 from symbian anna to belle..may i know how to view large images in the nokia internet browser..i cant change it

sorry,since i have just updated my mobile,i can't show you how large is it,
but i can show you how small is it...
even though i click 'more>view image',
the image that shows me is just that small....
Attachments:
scr000001.jpg ‏102 KB

Similar Messages

How to get larger images in albums?

I just realized that when you click on a thumbnail in one of my albums, the larger image is actually smaller than the original photo! All the photos I've put into my web albums have been shrunk to fit into the album display area. For instance, a photo that normally displays about 7 inches high when I view in Preview, comes out about 4.5 inches tall when displayed in my web album.
How can I get it to display photos at actual size?

Ray Dunakin wrote:
I tried turning off "optimize images", but they still were showing up at the reduced size.
providing a url to your site so people could have a look at what's going on may help...
What I'd really like is a way to designated specific images to display at a larger size -- most don't need to be very large, but some do.
I think that's not possible in iWeb PhotoPages... As you choose one format for all. However to get larger images in albums click on a photo and a window will popup called "Photo grid". You can increase the size of the images displaying by reducing the spacing and/or decreasing the number of columns.
Regards,
Cédric

Roll over to view larger image, click to select

Which combined server behaviors or technologies would allow
me to create a dynamic image gallery of thumbnails that when you
roll over any thumbnail image (images are populated via repeat
region recordset behavior), you can view a larger image. Selecting
a thumbnail would select the larger image version.
I do not need to know how to create the thumbnail images
(this would be achieved via aspjpeg with a repeat region applied to
it) but rather how to make it work as explained.
check out
https://www.schooloutfitters.com/catalog/product_info/pfam_id/PFAM898/products_id/PRO987
for an example.

OK so I'm almost there! A little more help if it's not too much trouble.
I've used the "mouse-over to enlarge" example and it seems to be working.
The images sit together top left (ie. the larger image appears over the top of the smaller image and both top left corners of the images sit in the same x and y position - it appears to grow to the right and down!). Can I change this so that the images sit in the same position bottom right and the image grows bigger, up and right?
Alternatively if it's easier I could do "mouse-over and click", but I need the click to open my image in a new window, sized to the image (so I can still see the main page in the original browser window).
Thanks again
Lopoc

Viewing Larger Image Version / in New Window/Tab

I have added in the links to larger image files to my lower res images. When I click those images in Preview it takes me out of the page and to a new window to view the larger image. Will this larger image be viewed in antoher tab/window? I see the option to click "Open in new Window/Tab" in the hyperlinks menu. I have not activated that for each image link. Should I?
I want to make sure I don't leave the site and don't maintain a tab to get bak to the page I was on after I view a larger image.

Yes you will need to do it for each link. Wether it opens in a new tab or a new window really depends on what browser the user is using and how they have it set up.

How to view an image at runtime?

Hi all,
I am developing a web application using JSP,struts, ADF BC with JDeveloper 10.1.3.
I have added
<input type="image" src="../../images/calendr3.gif"/>
in my Databound table on my JSP page.
I can see the image at Design time but no image at runtime.
What should I do to view the image at runtime??
I have tried
<input type="image" src="<%=request.getContextPath()%>/images/calendr3.gif"/>
in this case JDeveloper completely stops functioning. I don't know why? Maybe it's not allowed to have a jsp tag within a databound jsp form???

Hi,
did you add the image to JDeveloper (hit the refresh button) so it gets deployed with the application ?
Also, look at the generated JSP code to see how the image is accessed. I am sure you will find an improperly defined URL
Frank

How to view an image @ 100% ?

When I do some editing in iPhoto, especially sharpening, I'd like to see it @100%.
There is no indication at what % I'm viewing the image.
Is there any way to know that ?
When clicking "edit" on the bottom, at what size the image opens?
Thanks!

ok, I found an Apple article from 2007 which explains how to do that. I'm posting it here for others:
===================================
iPhoto: Sharpness adjustment may not be apparent when viewing at less than 100 percent
Last Modified on: July 13, 2007
Article: 301425
When you view an image at less than full size, iPhoto smooths it (a technique known as anti-aliasing) to get rid of artifacts that result from scaling down the photo. The relationship between anti-aliasing and sharpening is a trade-off; although anti-aliasing does not modify the actual image file, it does counter the effect of sharpening when viewing the image at less than full size.
Because of this, if you sharpen a photo, close it, then reopen it again at a less than 100-percent view, you may get the impression that your sharpness changes were not saved. In reality they were, but since the image has been re-aliased to fit your screen, the image's true sharpness may not be apparent.
To evaluate whether an image is sharp or needs sharpening, you should view the photo at 100 percent/full size while editing in a separate window. To open the photo in a separate window, you can either Control-click the image and choose "Edit in a separate window" from the shortcut menu, or change your iPhoto preferences:
From the iPhoto menu, choose Preferences.
In the General pane, locate the preference for "Double-click photo."
Set the radio button to "Opens photo in edit window."
Close the preferences window.
Now photos will open in a separate window when you double-click them. Once in the separate window, choose 100% from the Size pop-up menu. If you don't see the Size menu, widen the window until it appears.
Tip: If you are editing the photo from one of the other view options, you can press the 1 key to quickly jump to 100 percent view.
Other applications, such as Adobe Photoshop, handle anti-aliasing differently, so the degree of apparent sharpness can vary from one application to the next when viewing an image at a scaled-down size. You should see consistency when comparing the image at 100 percent across other applications.
Important: Information about products not manufactured by Apple is provided for information purposes only, and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.
========================================

How to print large image across several pages?

After using Appleworks for years I finally got Pages 09. In AW I used to be able to use drawing app to print large (36 x 36) images over several pieces of paper, simply by adding pages to the document. I would then tape the pages together to form the large poster. I can't see anyway to do this in Pages. It won't let you print any larger than 11x17, nor let you add pages to a layout to print a large image. Anybody know how to do this, or did I just waste my money?

Welcome to Apple Discussions
Yvan Koenig discovered with iWork '08 that you can span images across pages in a Numbers document as a substitute. Select & delete any tables & then treat the Numbers document as a draw document. You shouldn't need to add pages like in AppleWorks as Numbers adds them as needed to display all of the content.

CS3 How to style larger image window that thumbnail links to

Hi,
Can anyone advise on how to format the larger image a thumbnail links to? When I click on the link created from the thumbnail, the larger image just comes up tucked in the top left corner. I am creating this gallery manually because I don't have Fireworks, only CS3, which Fireworks didn't come with.
Any helpful suggestions would be greatly appreciated.

Acrobat Pro

How to view blob/image in uix?

Version: JDev 9.0.5.2
Goal: To view an image that is coming from a database table.
Set Up:
In the database: I have a database table with a blob data type. The blob data type contains a pointer to the image in a database directory.
In JDev.model: I have an Entity Object and View Object that contains the column attribute with a blob/blob domain data type.
Question: How do I build a uix page that allows me to pull in the blob (image)?
Thanks for the assistance.
--Connie

Take a look at this, hope it helps.
http://download-east.oracle.com/otn_hosted_doc/jdeveloper/904preview/creating_html_clients/uix_pimagewintermediatags.html

How to view large videos on BB 8800

Hello Everyone,
I need help in viewing large videos on my BB 8800. I know only Videos - Up to 320 x 240, up to 800 kbps, up to 30 frames per second are compatible, but all large videos have a higher resolution. It shoots an error when tried playing.
I want to view files with ext .avi, .wmv and .mpg files with higher dimensions. somewhat like this :
Media type: .avi
Video size: 480x360
Audio: 32000hz, 16bps, 2ch
Length: 0:15:23
Bitrate: 495kbps
Please help.

The KB that documents the supported formats is here:
KB05482 Media types supported on the BlackBerry smartphone
And here is a KB that discusses how to install Media Manager:
KB12926 How to install or remove Roxio Media Manager for BlackBerry smartphones
And all of the downloads are available here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
And here is the KB for how to transfer files using MM:
KB05456 How to transfer files to the BlackBerry smartphone using the Media Manager
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to resize large images without losing quality

Hello I have an image that I am trying to use as an email. Right now it is 2108 pixels. And for an email it should be 600 px. I created this image in illustrator as vectors and type.
Whenever I go into image size and i change it to be 600 pixels it gets extremely blurry. I have also tried converting this to a smart object... doesnt work. How do I resize my large image to be smaller without losing quality???

here is an example sceenshot of the opening dialog (.ai opened directly in Photoshop)
your illustrator vector should be rastered sharp at 100% actual Pixels in Photoshop
that is where you want to evaluate sharpness in Photoshop...
then File> Save for Web & Devices (and drag that saved file icon into an open web browser)
still no joy, embed your saved image here using the forum's camera icon...

How to scan large images with the CanoScan 9000F Mark II

I kept getting this error:
ScanGear
You are trying to scan an image exceeding 100 MB.
Reduce image size or switch off the thumbnails view mode,
when you want to scan this image.
OK
I couldn't find the fix anywhere online but I eventually figured it out myself. I'm posting it here so that other people don't have to waste time figuring it out.
The fix is to click the button in toolbar in the upper left corner of the ScanGear window. The icon looks like a photograph and a slide. The tooltip when you hover over it says "Switches on/off the thumbnails view mode".
This will switch the preview window to showing the entire scan area but you can still zoom in to adjust the scanning rectangle by clicking the magnifying class button in the toolbar.
There is another setting you may want to change in order to be able to scan even larger images.
- In the Canon IJ Scan Utility, click the "Settings" button.
- Click ScanGear in the list on the left.
- Check "Enable large image scans".
- You can also set the JPEG and PDF compression levels from here by clicking the "Settings" button.

Hi Riley!
So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any error messages or other details you'd like to give will also help the Community better understand your issue.
Thanks and have a great day!

How to dispaly large images?

Hi!
I have a simple problem, hope somebody could help me!
I would like to display images from a LONG RAW type column of an Oracle database (Oracle8i Enterprise Edition Release 8.1.6.0.0) in a BC4J application. I use JDEV 9.0.3.
The wizard generated entity object's attribute type for the image field is raw, i could not find the LONG RAW type in the java types. The maximun size of the raw type is 2000 bytes, so my app can not handle and display large images. How could i solve this problem? Pls help me!
I have read the otn forum tips, but they did not help me :((
Thanx
Bence

You may try mapping your column to BlobDomain!
If that doesn't fit the need, you'd have to create a similar LobDomain (see BlobDomain.java source in bc4jdomorcl.zip) for LongRawDomain so that it uses streamnig apis to fetch data from jdbc rather than using a column-value fetch.

How Adobe viewer scales images?

Hi,
I am putting a JPEG file of lesser resolution than the PDF and is scaling it inside PDF. I have a doubt how the viewer scales the image while rendering? Is it just pixel replication or can we specify inside PDF to use some filters for scaling to get better quality? Can someone please help me regarding this doubt?
Thanks,
Sham

I found the answer myself from the PDF standard. Image interpolation is done if the /Interpolate field in the image XObject is set true. I am quoting from the PDF standard below.
"When the resolution of a source image is significantly lower than that of the output device, each source sample covers many device pixels. As a result, images can appear jaggy or blocky. These visual artifacts can be reduced by applying an image interpolation algorithm during rendering. Instead of painting all pixels covered by a source sample with the same color, image interpolation attempts to produce a smooth transition between adjacent sample values. Image interpolation is enabled by setting the Interpolate entry in the image dictionary to true. It is disabled by default because it may increase the time required to render the image."

How to view mail image in nokia lumia 720 phone

i unable to view mail image and how to enable cc mail option

For viewing the Images.. refer attachment 1 (which is for .xls file but should be the same for Images) ...
For cc option .. Refer Attachment 2 (Tap on (...) to get the option)
Attachments:
Attachment Downloading.jpg ‏59 KB
wp_ss_20130830_0001.jpg ‏28 KB

How to view large images ?

Similar Messages

Maybe you are looking for