How to view multiple cameras on a MacBook

REMOTE LEARNING
I'm trying to find a way to view images from 2 or 3 digital camcorders or even webcams on the desktop of my MacBook, then share that desktop live online with music students so they can see closeups of my hands, instrument, etc. Is there a way to do that
I may do desktop sharing through Adobe Connect, but if someone knows a better way, please advise. (Adobe says the frame rate of live camera feeds on my desktop, vs the frame rate of Flash which Connect is based on, may be different, and if so, make the video image poor; anyone verify that?)
Lastly: audio over iChat is crappy with musical instruments. That's using the MacBook's built-in mic. The sound is compressed and distorted. Would using an external mic improve the sound? Is that the nature of iChat? Would Skype sound better?
Lastly: if it's impossible to share multiple camera views like I want, then maybe it's possible to simply hook up a video switcher and change the camera feed being sent to my MacBook and out via Skype. Anyone have facts about doing that?
Thanks!

This might be of use: http://www.apple.com/quicktime/broadcaster/

Similar Messages

How to view multiple reports using crystal reports 2008

Hi ,
I am working on vb6 project where in i am trying to generate reports using crystal reports 2008.
For this , i am making use of Interop Form Wrapper class in vb6.
I have a business requirement where in i need to view multiple reports on my screen.
please suggest me as to how this can be achieved.
Thanks in Advance
Regards,
Ramnath

Hi Ludek,
I am directly now using crystal report viewer control in my vb6 project.
As mentioned in previous mail, i have created a Interop Wrapper class over crystal report viewer control in .Net using visual studio 2008 and i am making use of wrapper class in my vb6 project.
I am able to access all the properties that have been defined in my Interop wrapper Class but the only stuff i need is to view multiple reports generated one after the another for a single button click Event.
Please find below the code that iam using to load and generate reports.
Note:
1. frm is the instance of my Interop Wrapper Class built over CR viewer control
2. All the user defined methods of Wrapper class that you see below will internally call the actual crystalreportviewer   properties defined in my Wrapper class
Say for e.g   frm.DisplayToolbar(True) will internally execute crystalreportViewer1.DisplayToolbar = True
frm.SetReportSource(strRptFilePath,0)
frm.SetSelectionFormula(strrecordSelectionFormula)
frm.DisplayToolbar(True)
frm.ShowExportOption(True)
frm.ShowPrintOption(True)
frm.ShowRefreshOption(True)
frm.ShowPAgeNavigateOption(True)
frm.ShowZoomOption(True)
frm.ShowParameterPanelOption(True)
frm.Show()
Thanks in Advance
Regards,
Ramnath

HT1677 How to view multiple websites on safari

How can I view multiple websites (tabs) on safari?

You can read King Penguins post for where the updating instructions can be found. You might want to read about the new features in iOS 5 as well so that you know what else you are getting into with this update.
Ironically enoughy, many users were angry and disappointed about the new tabs in Safari, but yet you seem to want to use tabbed browsing. Be aware that the new Music App is decidedly different than the old iPod as well. No song lyrics, and some other features are no longer available in the music app either.
I love most of the features of iOS 5, but you should take a look at what is in store for you if you update.
http://www.apple.com/ios/

How to view multiple files' info in a single window

I remember I can view multiple files' info in a single window before, but now I have to viewed multiple files' info in each their own window. It's very inconvenient to me, I want to get a solution to resolve it. Please do me favor, Many Thanks!
Message was edited by: 5imacintosh

Select them and press the Option, Command, and I keys at once. The resulting window will change its content based on the selection.
(45010)

How to encode multiple camera views and display them separately on the same page

Does any one know if this is possible with just one
encoder/streaming server or would you need multiple encoders to
send separate views?

Hello after a long time.
I have 2 the same capture card. And I am trying to stream to 2 diffrent rtmp server. I start first one and no problem. But when I run second FME instance and select second stream card, first one turns to black and second one shows up. When I close second, first one again comes back.
What shoul I do for streaming multiple streams form multiple stream cards?
Best regards.

How to view multiple output parameters from web services

I have used the Labview tool to create a .NET assembly from a WSDL file.
In the WSDL file the service has been defined to return 2 output parameters.
In Labview, when I invoke the method for this service the first output parameter ends up as the return value of the method. I can create an indicator for this and it gets updated properly when I run the VIS to use the web service.. The indicator is an integer value but recognizes the type defined within the WSDL file.
The second output parameter shows up as an output value. When I right click on it and create an indicator for it I get a .NET icon on the front panel rather than an integer value.
How can I view the value for this second output parameter after running the web service?
Is there a difference in how multiple output parameters handled in newer versions of Labview (I am using verison 7.1)?

scrooge wrote:
You can try this link .
the link is dead... or i dont have access..

How to view dvr cameras on iPad, How to view dvr cameras on iPad, which need actives control to run

How to install activex control on iPad , so that I can view the dvr cameras over safari ??

You cannot, for the following reasons:
ActiveX requires the Windows (95 - Win7; not Windows Mobile), the iPad uses the iOS operating system
ActiveX requires an 80x86-compatible CPU, the iPad uses an ARM-compatible CPU (the A5)
ActiveX requires an application to host it, there are no iPad applications the host ActiveX objects
Also, generally speaking, modern mobile devices (phones and tablets) rarely permit installing global plug-ins or system software (the ActiveX model for plug-ins). They implement a strict security model that essentially sequesters applications from each other (with some APIs for exchanging some data between applications).
You probably want to contact the vendor of the DVR camera or controlling software and enquire whether there's an app for iOS for viewing the video stream. Vendors of low-end systems may still only support legacy systems (some, for example, still use what is essentially MS-DOS), but vendors of modern equipment may well have an iOS application available. The relative ease of building these applications for iOS makes it a pretty straight-forward thing to do.

Viewing multiple camera angles at the same time

Hello -
Basic question, that I'm sure has been answered many times before - so apologies for the repeat!
I have been asked to take over editing some shows and gigs, which are filmed from up to four different camera angles. Each operator starts their camera, then runs it for the whole performance - so you end up with four long clips of video. The guy I am taking over from tells me that once you've got the four clips correctly aligned, it's actually a relatively simple job IF you can view all four clips at the same time. I basically need to be able to watch the whole show from start to finish, watching all four angles at the same time and doing a rough edit as I go, then go back and neaten things up.
1. Will Final Cut Express do this?
2. If the program can do it, am I right in thinking my iMac might be a bit underpowered?
As you can probably tell, I'm not at all down with the lingo on video editing, so I hope my question makes sense!
Thanks in advance,
Joe

Hi
A VERY Good Answer from Tom.
I do this in a slightly different way.
Videos on one track each
Re-sized to 25% as Tom describes
Moved to sync.
Then I don't use the blade tool - BUT adjust transparicy. So that needed angle get 100%
rest goes to 0%
Finalicing by re-sizing all back to 100%
Done
BUT if You can finance it - THIS is much easier to be done in FCP when getting the hang of
how it works here. Much more like a Real-Time editing situation - Click on the view You like
You don't even need to be very excat - Easily fixed with "roll tool" (I think it's named)
If Time is of essence and mony not - FinalCut Pro about 10 times faser to me
If other way around ==> FCE
Yours Bengt W

How to view multiple pictures in a SMS message as a slideshow??

I have the blackberry curve 9350/9360 and i occasionally get sms picture messages from friends with multiple pictures that i have to open up seperately to view. Is there a way to change the settings so that it will open up as a slide show and i can use the mouse to scroll through the pictures without having to open each one individually. Also the size of the picture is small, is there a way to re-size it so that the picture will fit on the entire screen?? My old blackberry used to do this automatically and I miss that option. Any ideas, please let me know...thanks.

instead of using set attribute you should use bind table method to display/update the records in table view.
step1 ) collect all the data in a local table
step2 ) and the bind that lacal table with your node
search1 = wd_context->get_child_node( name = `TABLE1` ).
search1->bind_table( lt_detail)
here lt_detail is your local table and TABLE1 is node which is bound with table ui element.

How to view and use files on macbook

I want to access and work on files from my macbook pro on my i-mac, how do i do this?

http://lifehacker.com/5808814/how-to-share-a-folder-over-your-network-for-beginn ers
http://www.dummies.com/how-to/content/sharing-a-folder-in-mac-os-x-lion.html
more
mac setup shared folder

How to view my camera from cell phone

Currently I have 2 Cisco/Linksys and 1 Chinese no name, wireless ip cams
1) WVC54GCA
2) WVC210
3) NT-2604 WGIP
With WVC54GCA , I can easily watch my camera when I'm abroad from my cell phone by typing the following :
http://XX.XXX.XX.XX:port_no/img/video.asf
With the NT-2604 WGIP :
rtsp://XX.XXX.XX.XX:port_no/mpeg4cif
However I could not manage to get the camera view of the WVC210 on my cell phone. Can somebody please tell me what exatly I should type pon my phpnes video player browser according to above examples.
Thank you
DC

Hi ,
Yes it works with the http://XX.XXX.XX.XX:port_no/img/video.asf on my mobile .
However I could not get http:///img/mjpeg.htm working on my Core Player
Do you know a good Camera Program (software) for Windows Mobile devices to control my both cameras and also PTZ control thru my winMo device ?

How to view multiple documents on Word

Whenever I open up a new document on Word a separate window pops up. If I have 3 different word documents open, I have to shuffle through 3 different windows in order to find the right one. Since I work on different homework assignments simultaneously sometimes I need more than on doc open. Microsoft Word for Windows has add ons which can provide you with multiple tabs in one document so that you don’t have to shuffle through different windows. Is there anything thing like that for macs? I searched but I couldn't find anything mac friendly. Or is there a way to change the preferences on Word in order to allow multiple doc view in just one window?

Is there anything thing like that for macs?
Yes, get the APP called YOINK
https://itunes.apple.com/us/app/yoink/id457622435?mt=12
very popular for the very reason you also want it

How to view multiple wireframes in project on Creative Cloud?

I've synched a one page wireframe from Proto to Creative Cloud and viewed in my desktop web browser okay.
Since then I've added a couple more pages to the Proto Project and synched again. But I'm not seeing the added pages in the file on Creative Cloud.
Do files on the Creative Cloud get cached in my browser? Or is there something else I need to do so I can see the added pages?
Thanks,
DAN

Good question.
There is a hidden feature in Creative Cloud.
When you preview your Proto project, there is Zoom icon at bottom right corner of the thumbnail preview.
Clicking the icon will open up new tab in browser to preview Live HTML of your Proto project.
Please try it out
Thanks,
Takashi

How to view multiple edits on a picture

Hello All,
I am using lightroom 5 and a lot of the times i will edit a raw file in various settings. here is a example;
First edit will sharpen and tone the picture
Second edit will be in black and white.
Any any time is there a way to save the two edits so i can switch back between them so i can export them as jpeg? when i view the rar picture in lightroom develop mode i see the the +- box on the picture however, i only see the last edit i did (in this example it was black and white)
i am sure there is a way to do this i just don't know how

Thanks, i just searched VC and also found History and Snapshots. the history is just what i was looking for for the current pictures and i guess i will also start to take snapshots. whats the difference between Virtual copy and snapshots?
Working with snapshots and history | Learn Lightroom 5 | Adobe TV

How to view multiple waveforms in the same window

Trying to see the waveforms of all the 64 channels of AMUX-64T using labview. MIO board has been used. Want to see the waveforms in the same window but not at the top of each other but seperately on invidual axis. Screen shot has been attached and the situation has been explained.
Attachments:
shot.jpg ‏51 KB

Try posting it at comp.lang.labview.
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&group=comp.lang.labview
Ahad bhai: if your apartment-mate uses a wireless range extender (on sale for $50 at compusa), you can easily connect to his network. You'll also need a USB 802.11b wireless adapter.
http://www.compusa.com/products/product_info.asp?product_code=303416&pfp=SEARCH

How to view multiple cameras on a MacBook

Similar Messages

Maybe you are looking for