How to view multiple waveforms in the same window

Trying to see the waveforms of all the 64 channels of AMUX-64T using labview. MIO board has been used. Want to see the waveforms in the same window but not at the top of each other but seperately on invidual axis. Screen shot has been attached and the situation has been explained.
Attachments:
shot.jpg ‏51 KB

Try posting it at comp.lang.labview.
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&group=comp.lang.labview
Ahad bhai: if your apartment-mate uses a wireless range extender (on sale for $50 at compusa), you can easily connect to his network. You'll also need a USB 802.11b wireless adapter.
http://www.compusa.com/products/product_info.asp?product_code=303416&pfp=SEARCH

Similar Messages

  • Can I view multiple sheets at the same time?

    My search fu hasn't been up to finding how, or if it is possible, to view multiple sheets of the same document at the same time. Can it be done? Either a split view in a single window or multiple windows would be fine.

    marchyman wrote:
    Thanks for the answer. Another workaround is to copy the table that I'm interested in and move it to the sheet where I want to see it. When done I can copy it back or delete it. Just seems like extra effort for something that should be built in.
    No need to copy the sheet. You could just drag it to the sheet where you want to see it, and when done, drag it back 'home'. (This can be done using the icons in the sidebar.)
    Caution: Changing to this method will require vigilance on your part to prevent accidently deleting the table instead of moving it. frequent Saves are recommended.
    Regards,
    Barry

  • How to have multiple images on the same screen? like in the movies where you see several actions at

    how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
    i don't find  a tutorial in adobe tv....
    thanks !!

    The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
    If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

  • How to  show additional items in the same window using stacked canvas

    How to show additional items in the same window using stacked canvas.
    My content canvas has 14 items, and I have to include more.
    I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

    Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

  • Gantt view - multiple dates in the same row

    Hi,
    I created gantt view showing employees' vacations. Some of them have their holidays split into several dates (periods). How can I show those multiple dates in the same row in the gantt view? I can only show start date and end date of one vacation, but would
    like to enter multiple periods to be shown in the gantt view, in the same row.
    Thanks.

    You can't using the OOTB gantt chart so you would have to look at custom development or 3rd party web parts.
    Such as (blatant plug but it directly answers the OP question) my own companies Planner web part.
    http://www.pentalogic.net/sharepoint-products/planner
    The By Category view puts timelines on the same row so its ideal for things like vacation planning, room booking etc.
    This page shows it in use.
    http://blog.pentalogic.net/2010/08/sharepoint-staff-vacation-planner-absence-wall-chart-dashboard/

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to display multiple reports at the same time

    Hi,
    I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
    I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
    call_report('report1');
    call_report('report2');
    call_report('report3');
    call_report('report4');
    The main problem is that, just the last report is been displayed.
    Is there some way to display report1, report2 etc in separate tabs or windows ??
    Regards
    Carlos

    You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
    The question is how you are calling the report.
    Here is how I manipulate it.
    After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
    Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

  • How to use multiple proxies at the same time?

    im planning to use multiple proxies at the same time on mac but i have no idea how to do it?!. i need help!thanks!

  • How to manage multiple sizes of the same image?

    I recently took up LightRoom for all the good things it does. One of the things I need to do, however, is to create and manage multiple sizes of the same image needed for different purposes. I always found this cumbersome. I totally expected that the LR library would offer a solution for this but I looked and I didn't see anything. Sure you can export and resize in the process but then you're on your own. Am I missing something? Isn't there a better way? What does Adobe have in mind for best practices and how do you handle this?

    I can't speak for 99jon, but when I need multiple sizes, I export at the desired sizes, and then make use of the exported photos (upload, e-mail, whatever) and then delete the exports. Thus, there's really no need for me to keep track of the photo at this specific size, knowing that if I ever need it again -- unlikely -- I can regenerate it with the export pre-set, so I put no effort (zero!) into keeping track of photos at different sizes.
    The idea of adding it back into the catalog doesn't get me excited, and I would advise against it. I don't need this, and I don't see the benefit of keeping this particular size export for the long-term. As I said, I can always recreate it — but maybe you have such a need to keep these exports long-term and recreating it at a later point in time doesn't meet your needs? Can you explain?
    By the way, you can't resize a virtual copy, so that won't work here. The only time you can resize is on export.

  • HT3529 How to delete multiple messages at the same time?

    I'm new with and IPhone I try to delete multiple messages at the same time. and I can't find how to do this.

    Email messages? Tap the edit button...tap each message you want to delete...hit delete...once in trash, tap edit, then tap delete all.

  • How to configure multiple clusters on the same machine.

    I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
    "This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
    Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
    Thanks,
    Jacob

    FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
    Re: UDP flood hosed my LAN?

  • How to use multiple Interfaces for the same BS?

    Hi @ ,
    Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
    I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
    Any help will be highly rewarded
    Regards

    Hi-
    Yes it is possible you can use multimapping for mapping the interfaces.
    To know more about multimapping see
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    Some more helpful links
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • How to avoid multiple session for the same username

    I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
    to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

    Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

  • In OEM 12c, how to manage multiple incidents at the same time?

    Hi,
    Is there a way to manage multiple incidents at the same time? For example, if I want to assign owner for multiple incidents in the incident manager, is there a way to do this? Thanks for the help.

    This is currently not supported. This support will be available as part of the next patch set release.
    Please note that you can use Incident rules to assign owners to incidents as they come in or get updated.

  • How to open another iView in the same window

    Hallo,
    I user following code for opening iView:
    String iView = "http://server/irj/portal?NavigationTarget=ROLES://portal_content/example";
              this.getForm().addRawText("<SCRIPT>\n");
              this.getForm().addRawText("EPCM.doNavigate('" + iView + "',"
                             + "'1',"
                             + "'toolbar,menubar,resizable,scrollbars',"
                             + "'',"
                             + "'',"
                             + "'',"
                             + "''"
                             +
                        //","+
                        ");\n");
              this.getForm().addRawText("</SCRIPT>");
    ... but this open iView in new window. I'd like to open iView in the same window as the primary iView.
    Best Regards,
    Josef Motl

    Hello all:
    And... How could I show some i-views with another contents in the same page, like this?
    photo
    IVIEW
    photo
    IVIEW
    Thanks,
    Alejandro.
    P.D.: Excuse my poor English.

Maybe you are looking for