How to view NEF (RAW) photos when in editing mode for PSE 9

When I want to open a NEF photo to edit, all I cannot see the actual photo. I have to go into another program to view the photos so that I can determine which file name I want to open and edit.

In the editor, go to Help >Updates and see if it updates camera raw for you.

Similar Messages

NEF(raw) photos turn into jpg when i drag from iphoto to my desktop?

why do my NEF(raw) photos from my nikon D90 turn into jpg when i drag them from iphoto to my desktop? i can not work on them in PS unless i dig into the original files in the masters list. i download them from the card, both go in, and if i look at the info it says that they are both there one in jpg and one in raw format side by side. what am i missing and how can i drag the raw photo onto the desktop keep it in that format so that i can then put into PS.

thank you just tried and worked just fine, did not set any advanced options but opened up in PS any way.
well i have one other q that maybe you can answer, when i send photos to folks from iphoto, through macmail, no one can download the photos and keep on their 'puter. several years ago this changed and i have never found the answer. i will put on my desktop zip the photos and send that way. is their another??

I have a fujifilm X100, at first there were no issues viewing my RAW photos but now all of a sudden the pictures come up as "unsupported image format"

I have a fujifilm X100, at first there were no issues viewing my RAW photos but now all of a sudden the pictures come up as "unsupported image format". How do I fix this?

No, I did not do any updates between the time that the files were viewable and when they were not. I was actually without an internet connection for a few days when the problem started. I reported the bug to apple and have since been contacted by them asking for a few sample images so they can figure out the problem, so I'm hoping they come up with an answer for me.

How could I Import RAW photos from sony A300 into Lightroom 1.4.1?

How could I Import RAW photos from sony A300 into Lightroom 1.4.1?
RAW photos files in sony A300 are saved as "*.arw".
any one can help?

This is well known bug. One day Adobe will recognise that with the best live view system (A350/300) and best usability (A700) they need to take the Sony DSLR's seriously.
Use the Import function, but use "choose files". Your CF card (in Camera or reader) will just be another drive. Navigate down to the folder with the pictures - control+A, choose selected. Then choose copy to new location and import (safer than using move).
Don't forget to tick the backup box.
Hope this helps. Peter

How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
This is the biggest question, where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

How do I find offending photo when there is a problem uploading photos to order prints?

How do I find offending photo when there is a problem uploading photos to order prints?

What is the problem? What version of iPhoto? Of the OS? Try safe mode
LN

How do I delete a photo when there is not a trash bin at the bottom of the screen

How do I delete a photo when there is no trash bin on the bottom of the screen?

If there is no Trash icon for that photo, the photo was most likely copied to your iPhone by syncing with your computer. To delete the photo you need to do another sync.
1. If you want to remove a complete album, deselect that album in iTunes on your computer. Then when you click on Sync or Apply that album will be removed from your iPhone but it will remain on your computer.
2. If you want to remove only certain photos from albums you must delete the photo from the album on your computer or move it to a different album or folder. Then when you click on Sync or Apply the photo(s) will be removed from your iPhone.

HT5182 How do I import RAW photos from canon 7d to my new iPad 4?

How do I import RAW photos from canon 7d to my new iPad 4?

Use the Apple Camera connection Kit and connect your camera directly to the iPad. Turn on the camera and you'll get an option to import.

How much does CLAD cost? When can I sit for such an examination?

I am interested in obtaining a CLAD certificate. I live in Beirut. I have found some test centers from http://www7.pearsonvue.com/Dispatcher?application=VTCLocator&action=actStartApp&v=W2L&cid=383 but I didnt get a reply when I asked them about cost/time.
Can you help me by answering the questions?
How much does CLAD cost? When can I sit for such an examination?
P.S. I've been using LabVIEW for 5 month already.

Hi A.A.A.,
I'm glad to hear you are interested in pursuing your Associate Developer Certification. With regards to pricing and scheduling your exam, I recommend you contact the Certification specialists at your local National Instruments office. I believe that is National Instruments Arabia. You can send an email with your questions to [email protected] or phone # +961-1-33 28 28, and they will work with you to purchase and schedule your CLAD exam.
Five months is a great start at familiarizing yourself with the LabVIEW environment. However, I definitely recommend taking a look at the exam preparation materials to ensure you are familiar with all the topics and terminology you could be tested on. If you go to the Certification Preparation Page (the link I included below) and select the Associate Developer exam and your timeframe, the page will return all the official preparation resources the Certification Development team has made available online. We also have some other posts on this forum with regards to exam preparation.
http://www.ni.com/training/certification_prep/
Best of luck!
Mallori M
Mallori M
National Instruments
Global Customer Education Program Mananger
Calculate the time you will save with NI Training

Mac book air mid 2013, warms to approx 65 degrees when in sleep mode for 2 to 3 hrs?

Hello,
I have recently noticed that my macbook air mid 2013 warms up to approx 65 degs when in sleep mode for 2 hours or when I am doing my normal work. I am running Mevricks and I also use a moshi key board cover. Is it a cause of concern??

The keys without covers already transfer to a small degree finger oil to the LCD screen of the Air, even the thinnest keyboard covers place pressure on the LCD, however normally this would have no bearing unless stowed away in a pack with pressure, nevertheless causing dirt and oils is increased with covers to transfer more to the LCD, ....Macbook Air as well.
Beware of keyboard covers and using same
Beware of using thick keyboard covers on your Macbook, some pretty ones sold online are rather thick and upon closing your monitor, touch the screen and transfer more finger/hand oil to the LCD but at worst press excessively on the LCD display, especially in the case of the Air and newest Macbook Pro Retina. There is ultimately very little purposeful use of these keyboard covers if you keep your hands clean, additionally they do not protect against spills as many people presume they do; directly yes, but at the edges no. They also making typing a more challenging experience and run a fine line between 'serves no purpose' and 'possibly damaging'.
Screen covers protect against nothing and place an unwanted layer between the LCD and viewing, additionally if you dont touch same or dont have any pets that might claw at the screen there is no logical reason to have a screen shield.
dust will accumulate regardless. Realistically what are you trying to protect the screen from. The back is solid aluminum alloy, the front LCD viewing screen should never be intentionally touched.
outside of a sneeze or some debris which an extremely lightly damp cloth can remove, all else is dust. ...
Use a soft paintbrush or makeup brush for cleaning
One very useful tool for cleaning dust from the LCD screen, the hinge area of your notebook and around the keyboard, is a very soft inexpensive small paintbrush or a makeup brush. The less you wipe your LCD screen with anything like a cloth, the better. This small brush is very handy, quick, and ideal for removing dust from around and on your notebook.
Small soft makeup brush or paintbrush for removing dust from the keyboard, hinge, and LCD display

Strange TableView problem when entering editing mode.

I'm having a problem when entering editing mode in a tableview. What happens is the cell data from the section below is being displayed on top of the last cell in the current section.
The narrower cell, with the plus sign on the left side, is briefly visible before (a copy of) the cell from below covers it up.
Has anyone else seen this behavior? I'm really stumped here.
More info, or how my table isn't standard: Each of the three sections is populated from a list. If the user has previously deleted one of the items from the section, only then is the plus sign shown. Otherwise, only the delete sign is shown. In other words, if there isn't anything to add, then the plus sign with the associated ...add a new X is not shown. This all works correctly. The counters work. The lists of previously deleted items are populated correctly.
What doesn't work is the last row of the second section being covered by a copy (at full width) of the first row from the third section. The first and third sections both look correct. phew, I hope this makes sense.
Here is what it looks like:
Sizes
- Size 1
- Size 2
+ ..add a new Size
Measurements
- Measurement 1
- Measurement 2
Note 1 << this is the problem row
Notes
- Note 1
- Note 2
+ ...add a new Note
Thanks for any help you can provide.
Ty

OK, after more digging I answered my own question.
The problem was the section order for added and deleting rows in setEditing. I was setting the indexPathForRow in section 2, then, 1, then 0. If I do the update in order 0, 1, then 2 it works fine in 2.0, 2.1, and 2.2.

Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?

Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

How to open Attachment to a workitem in edit mode ?

Hi all,
How to open Attachment to a workitem in edit mode ?
Example if I attach a FI doc by binding BO BKPF to Attach_objects .. How can I open the attached FI doc in edit mode .
Regards,
Naval bhatt.

if I attach a FI doc by binding BO BKPF to Attach_objects
As Per my understanding that you created a FI DOC by using the BO BKPF , now you want to attach this instance of the BO to the &_ATTACH_OBJECTS&.......
If this is the case than you should know about the BO SOFM which is used to attach the BO to the Workflow..
First go through the BO SOFM in SWO1.
Secondly for passing the Key fields for the BO SOFM you need to refer to the table SOFM in SE11.
Note: The BO name and the table name both are same SOFM.

How do I import RAW photos into iPhoto? I cannot import RAW photos from my Olympus EPL-2 camera. I am using iPhoto 7.1.5.

I cannot import RAW photos from my Olympus EPL-2 camera. I am using iPhoto 7.1.5. I read that iPhoto has to update their system and add each camera to be able to import RAW photos from it. If this is true, how can I let Apple know to add my camera. Thanks in advance.

The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
iPhoto menu -> Provide iPhoto Feedback
When support is added I also expect that you'll need iPhoto 09 or 11.
Regards
TD

How can I transfer RAW photos from iphoto to a separate folder. I want to send RAW photos to someone to process.

Hello I use iphoto as my place of storage of my photos.
I want to take some of my RAW photos out of iphoto and plac e them in a different folder to " send" to someone who wants to " edit".
I am not the one who will process the RAW i just want to get the RAW to the person that needs them. But my RAW are in iphoto
It seems that if i just drag a RAW picture from iphoto to dektop it does not retain its RAW size.
please advise
I just want to be able to send RAW photos that i have in iphoto to someone who will edit them.
Message was edited by: Scott Malone

Where are my raw photos and how do I get to them (if anyone knows please explain in very simple terms).
File -> New Smart Folder
Photo -> is -> Raw
will find all your Raws.
As described above, exporting with the Kind set to Original will get them to the Finder.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How to view NEF (RAW) photos when in editing mode for PSE 9

Similar Messages

Maybe you are looking for