How to view pre-installed License file
Hi,
I was told we that 6296 comes with pre-installed 18-port license but I could find any.
There is nothing under installed license. All I can find is 180 days grace period.
Is pre-installed 18-port license viewable via license management?
Thanks,
Harry
Hi,
No, you cannot view your default license. you can only view additional license as well the grace license (180 days).
you can configure the port normally and the base license should cover up until the certain port number, before start using the grace license.
And the additional Modular also give you another base port license (another 8 port if I'm not mistaken), but you can use it in any port, not only on the module. when you unplug the module, the license is removed, and if the port is greater than the licensed, it will go to the grace license.
Hope it helped.
Thanks,
Pieter
Similar Messages
-
How can i check the license file installed on the server CCM 6.1.4
Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob -
How to view and manage hidden files in folders.
Hi all, my question is: How to view and manage hidden files in folders?. I see hidden files in other computer but no in my Mac.
Some of you can help me?
Thanks..Most hidden files are hidden for a reason. Tampering with them can seriously affect the stability of the system.
The software Tinkertool can
http://www.bresink.com/osx/TinkerTool.html
Can manage the invisibility, which I would only do after backing up your system. -
How to view pre-built Dashboards and Reports of Oracle BI- Apps?
Hi All,
We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
But we are facing problem in viewing any prebuilt dashboard or report.
Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
Any help would be highly appreciable.
Regards,
Manmohan SharmaHi Damon,
Thanks a lot.
Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
Could you please provide the path to get Prebuilt Dashboard & reports ?
Regards,
Manmohan Sharma -
How to view and print pdf files
how to view and print pdf files
Download and install Adobe Reader: Adobe Reader Install for all versions
Open the PDF file using it. If security restrictions don't prevent it you could also print it. -
E51 - How to move pre-installed application from m...
Hi all,
I just purchased my E51 some days ago. The phone packaged with Advanced Call Manager pre-installed in microSD card. Now I want to use my 2gb microSD instead of 512mb from Nokia but I will lose the application if I take out the microSD card. How can I move that application from card to phone memory since I could not find the *.sis of that application.
Thanks in advance.A new phone just includes the installers - you can choose whether to install on the phone or memory card.
However, you can still transfer the app to the newer memory card. Use a card reader, or connect your phone in "Data Transfer Mode", and copy ALL the content of the 512mb card to your computer - make sure that you include the hidden files too. Then copy over these files to your new memory card, again take care to copy the hidden files. That way, you will have the pre-installed software on your new memory card. -
How to migrate Pre-install Apps to new microSD car...
Just bought a new 4GB MicroSD card for my new N82, would appreciate any advise as to how can I migrate my pre-installed Panoman and Hotsite apps from the supplied 2GB MircoSD card. Thanks.
Hi clementlim
Enable "Show hidden and System files" on your PC and copy contents of 2Gb card to New Folder on desktop, then transfer contents to your 4Gb one. This has always worked for me moving TomTom installation to larger cards.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
How to transfer pre instaled maps
My N95 came with a 1gb memory card with full uk maps pre installed. I also bought a 4gb memory card and need to know how to transfer the pre installed maps from the 1gb card to the 4gb card any help much appreciated.
Hi vinty
I would suggest enable "show hidden and system files" on your PC and put 1Gb card in card reader and copy contents to new folder on desktop; after formatting 4Gb card transfer contents from newly made folder.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
How to reinstall pre-installed iWorks after hard drive replaced?
iWork was pre-installed on my iMac (July 2010) 3.2 gHz i3 running OS10.6.8. The original hard drive was recalled by Apple and replaced. I backed up all data to Crash Plan prior to the change out. When I tried to open any of the iWorks programs I received the following error message:
I checked my install discs and application install discs, but iWork does not show up there. How can reinstall these programs?Thanks, mate, but the computer did not come with any iWork DVD. It only had the OS install disc and the Application restore disc, neither of which contain iWork. The error message reads: "Pages cannot be opened because of a problem. Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Clic Report to see more detailed information and send a report to Apple."
I sent a report to Apple. This message repeats for Pages, Numbers, and Keynote. My original receipt shows the iWork app was paid for. -
How to view and edit .md file (text file) via Documents To Go app
Could some one please let me know how to view a text file with .md as the file extension using Documents To Go app? If this is impossible, which app do you recommend.
.md is a markdown fileHi,
I believe I have my answer now, or at least a good thread on the subject going hear:
http://forums.java.net/jive/thread.jspa?threadID=45148
Thanks,
Mark -
How to view TestStand XML results files
Hi Gurus,
We have used TestStand to save literally thousands of test results files in the XML format. TestStand allowed us to view a specific results file immediately after a test sequence, however I can't find a way to view the XML test results files otherwise. In other words, how can I view any one of a number of TestStand-generated XML results files using TestStand or otherwise (in an appropriate format/style) ?
Regards
Mike VHi Ray
its version 6.0.blablabla
For some reason it doesn't find the stylesheet on the PC where its being launched from. i can fix the problem by editing the XML's stylesheet path within the xml file and putting style sheet in same directory as results, but I had to write a program to modify all the files because there were so many. Future files no problem.
On another issue, we have thousands of results files stored in XML. Now I need to do some statistical analysis on the results but extracting the fields into a spreadsheet is a nightmare, I wish i'd used text files (database ultimate goal). Any tips here?
Also, in TestStand there seems to be only one location allowable to store all results files. Ideally i want to store results files in product-specific directories, ie not put results for all UUT types in the same directory. Is this possible?
Also, how can I append the word "Pass" of "Fail" into the results file name so you can tell at a glance if a test was passed without opening the file?
Regards
Mike -
How to view database core dump file
I have an Oracle server on windows 2000. Now, I found the oracle server will produce a core dump file in ..\cdump directory. But this file is only a system memory image, so it's hard to analysis the core dump reason, could you tell me how to view this file? thanks
There's no much useful information for you too see. You can create a SR with Oracle support and upload file if you want to investigate the cause of core dump. also check if there's any errors in your alert<SID>.log and core_dump_dest
-
How to view ipassword app backup files in XP?
How can I view ipassword app backup files in XP?
Ask the app developer if it's even possible. That's not an Apple product.
-
How to update pre-installed apps in macbook pro?
I bought a macbook pro last middle of Oct-2014. It uses Maverick OS and has pre-installed apps like iMovie, iPhoto and GarageBand. Then the new OS Yosemite came. I updated my OS. Then I receive notice of updates for the said pre-installed apps. When I used to log-in my apple ID to installed the updates, App Store message that these apps were purchased using different account. How can I install the update? Do I need to bring my macbook to Apple to install the updates?
Contact Apple store support before going to the Apple Store.
http://www.apple.com/support/mac/app-store/contact/ -
How To View or Run .CLA files?
I've downloaded sample applications from Adobe LC web.
I've Unzipped the file, but then I don't know how to open it.
The file extension is .CLA
Can you help?Step1: Rename your file into .LCA
Step 2: Goto Adminui-> Services -> Applications & Services-> Archive Management-> Import Archive.
Step 3: Locate your file and click import.
Now you can see the updated processes and forms in your workbench.
Nith
DISCLAIMER:
========================================================================
"This communication is intended only for the named recipient and others authorized to receive it.
It contains confidential or legally privileged information. If you are not the intended recipient, please notify us immediately, and note that any disclosure, copying, distribution or action you may take in reliance on this communication is strictly prohibited and may be unlawful. Unless indicated otherwise, this communication is not intended, nor should it be taken to create any legal and/or contractual relation or otherwise. Ministry of Finance (MOF) is neither liable for the proper and complete transmission of the communication, nor for any delay in its receipt.
Whilst MOF undertakes all reasonable efforts to screen outgoing e-mails for viruses, it cannot be held liable for any viruses transmitted by this e-mail."
Maybe you are looking for
-
How to put images on JPanel one at a time?
Hi, guys. I am trying to put 7 images to a panel one by one,each takes one second so that users can see the process each images being shown on the panel. But the fact is the system freeze for 7 seconds and then display them all once. Altho the "one i
-
How to set some rows in ALV to be editable or some non editable.
Dear all Gurus, I'm facing a situation here, I need your assistance. I'm creating a alv table where the user can enter a data and then this will be uploaded into the system. Now upon validation some records might fail and would need some changes and
-
How to define Export parameter as Import parameter in next test script.
Hi Experts, We have defined Purchase order no. as export parameter in ME21N transaction test script. Test configuration for ME21N transaction executed succesfully and the Purchase order No. appeared in the last message is the export parameter for nex
-
Tracking of Purchase orders and Purchase Requisitions per Equipment
outside a query, is there an easier way to track all the PRs and POs generated for an equipment's maintenance? I have to list down the orders (from the equipment) and extract the POs and PRs, and i find it quite tedious. Thanks everyone!
-
Filter gallery is greyed out in photoshop cc? WTF?
Why is my filter gallery gone in photoshop cc?