How to view Report queue on different subnet machine?

1. We are running 9.02.2 Ias and report server on subnet 10.22....
2. We have a box on subnet 60.22.22.... with a report queue viewer. How we can view the report queue on 10.22.. from the box 60.22.22?
3. Networking: you can ping 10.22.. from 60.22..., but you can't ping 60.22... from 10.22
TIA

Hi Navneet,
The tar I had withtech support was open for 2 moths by now.
This method does not work for us as we have connection opened only from the client to the server. Another words you can ping server from the client but not the opposite.
This works fine for accessing 9.0.2.3 server from 6i client using tns and report proxy, but does not work with CORBA.

Similar Messages

  • How to process reports with two different date fields

    Morning all,
    This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
    These two reports pull data from two different date fields and has different status check ups.
    Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
    Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
    The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
    I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
    Any ideas how to produce combined report which has two different date fields?
    Many thanks in advance
    Regards
    Jehanzeb
    What I

    Charliy,
    No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
    So its more like this:
    Klab->Max-Credit2--->Credit_date
    Sae->Maxmast->Order_header---Date entered.
    two dates totally different tables, dbs
    however, I will try your idea too and see if that works.
    Regards
    Jehanzeb

  • How to view reports

    Hi everyone
    Can you help me out.. How to view the following in OWB 9.2
    1. Viewing Runtime Repository Reports
    2. Viewing Deployment Reports
    3. Viewing Execution Reports
    Regards
    Rachit

    Hi Rachit,
    I'm not entirely sure what you mean, but I guess you're referring to information that is shown by the Runtime Audit Browser.
    You can run that either standalone (use OC4J instance and run Runtime Audit browser client), or access it via Oracle Portal (that of course only works if it has been set up by DBA's).
    You can of course customise it by writing your own queries on the tables in the runtime environment.
    Cheers, Patrick

  • How to view report in online preview mode

    hai all,
    i wish to view report in online preview mode for existing reports.
    ie. output in-report online preview mode
    any idea please
    thanks in advance
    rcs
    ---------

    Hi,
    there is an SBO setting inside
    Administation>System Init>Print preferences>Print Draft Watermark on Draft
    Then a "DRAFT" watermark will appear if it's printed before adding.
    In CR use a stored proc to get data back according to the Objectid@.
    Then if its the object id of a draft then add a CR watermark.
    Hope this helps.
    Regards,
    D

  • New computer: how do I retrieve photos from different Time Machine backups?

    I use Time capsule to back up my iMac & my Macbook Pro. My old Macbook Pro "died" last week and right now I'm setting up my new one. I have copied the files & documents I need from my old laptop and my iMac without any problems (though it took a surprisingly long time considering the small amount of docs I copied). I have however not copied any applications or photos.
    My question is: how to I retrieve photos from the different Time Machine back ups (iMac & old laptop) to my new computer without messing up? It would be especially "cool" if I could retrieve only some of the photos.
    (I don't know if this has any importance, but my old Macbook Pro was & current iMac is running on Leopard and the new Macbook Pro on Snow Leopard).

    Your best bet is to start over; erase the new Mac's internal HD, reinstall OSX, then use Setup Assistant to transfer your stuff.  It's the fastest and most reliable way to do it.  See How do I set up a new Mac from my old Mac or its backups?, especially the green "Second Chance" box.
    Otherwise, to see the backups for a different Mac, see #17 in Time Machine - Frequently Asked Questions.  To restore selected items, see #15 there.

  • How to view reports in OBIEE+ that were generated in another application

    Hi All,
    We have some reports which were geneated in another application (Oracle Utilities, CC & B). Those reports are in folders with .XDO format with config files for each report. We were unable to view/open them in BI Puiblisher or Analytics. Not even able to upload them in any folder in OBIEE plus.
    Regds
    DCB

    Hi All,
    We have some reports which were geneated in another application (Oracle Utilities, CC & B). Those reports are in folders with .XDO format with config files for each report. We were unable to view/open them in BI Puiblisher or Analytics. Not even able to upload them in any folder in OBIEE plus.
    How to integrate the CC & B or ORACLE UTILITIES to OBIEE11g?
    Regds
    DCB
    Edited by: DCB on Feb 3, 2011 1:17 AM

  • How to view report execution Log files on RAS Server

    I wish to view the log files that are generated when a crystal report is run. In my application the crystal report is triggered from java application. The report templates are stored on the BO server. The report is executed converted to PDF and then returned back to java app for viewing. I need the execution logs and the activities performed by the server for this report generation.
    1. Where can I find the log file with this information on the server?
    2. Are there any setting required to be made to capture these information ? If yes, where and ho can I make these settings ?
    Thanks in advance.

    Hi Don,
    Thank you very much for your reply. I am fairly new on working on the Admin side and this is my first opportunity to be managing some tasks of this role. I have majorly been a CR report designer.
    The answers to your questions are as below :
    1. The reports are developed using CR 2008.
    2. I have access to the CMC. The product version as specified in the settings tab is Product Version:  12.1.0.882 .
    3. The Dev application programming language is Java(Spring,hibernate etc)
    4. I have access to BusinessObjects Enterpriseu2122 XI Release 2 Administratoru2019s Guide. However I couldnt find anything that can give me report execution information.
    Am I looking at the correct application (CMC) and docs ? If not, what is the correct BO application I should be using to enable  Iogging. In the settings tab, I can however see that Auditing is enabled. Below is the complete information I can see under Properties in the Setting tab of the CMC application.
    Build Date:  2008/09/13:08:31:32  
    Build Number:  882  
    Product Version:  12.1.0.882 ; 
    Data Source:  BOE120:localhost:3306  
    Database Name:  5.0.34-enterprise-nt  
    Database User Name:  sa  
    Auditing:  Enabled  
    I  am really confused and require your urgent help.
    Thanks
    Malvika

  • Very Urgent:How to view an object from different angles around 360degrees

    Hello
    My problem is that i want to view an object which is drawn on the canvas3d in the simpleuniverse from all angles...i mean around 360degrees.
    Suppose i have a front view... and i wan to look at the view..at 30 degree ..
    plz help me
    this is urgent
    regards
    seema

    Thanks Titus76. Your technique works. But one more problem. I want to rotate my all the three axis through some specified angle. In other words I want to rotate my viewport. In previous case if I implement ur suggestion only my object rotates, but not axis'. Now I want to rotate my all 3 axis. So that when I rotate, all my three axis rotate. This way my objects should obviously rotate. How will I do that?
    Regards

  • How to view report from a Form

    I am trying to call a parameter report from a form passing all
    the parameters, using RUN_PRODUCT procedure. I want to display
    the report and not to print it. I set the destination type
    to 'sysout' and the mode to BATCH. I think the mode has to be
    batch in order to hide the parameter form and display the report.
    In the actual report, I have set the initial value for the
    destination type to be sysout.
    But, I am getting the error saying for destination type sysout,
    the mode should be BATCH. That's what I have. So does any one
    has any idea, what I am doing wrong or is this a bug?
    Thanks for your reply and time.
    Benoy Peters

    Set it to Screen.

  • ITunes - how to view original library on different eMac

    We now have another eMac which I am trying to log into iTunes so that I can sync my iPhone (which is too new to sync to other computers!). However it doesn't appear to let me log into it - I can't find how to do this. We have just upgraded to the latest iTunes. I need to see my original library (and therefore playlists) so I can sync it to my iPhone. How do I do this pls?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Cisco CP (ccp) on different subnets

           Hello!
    We currently have lots of branches around the world (at about 20) using a class A subnet segmented in many different subnets.
    The point is that we would like to use Cisco CP (professional) to perform some monitoring on our routers, but once they are in different subnets and ccp technical datasheet says that it'd work only within the same subnet (client/PC and router).
    I'd like to know if someone know how to make CCP works accessing different subnet router's.
    If it's not possible, you guys now another tool that may help us to provide some monitoring options of remote routers similar to CCP?
    We are currently using CLI for everything and sometimes we need to kind of meshup everything to have a graphic, etc.
    Thanks in advance.
    Daniel

    Thanks.
    I managed to make it works and now its running well... i can open CCP and see some graphics.
    But i'm trying to view TOP TALKERS and TOP PROTOCOLS using netflow and even after prepairing netflow as requested by CCP it stills getting no answer... no data.
    All grapchis and info that i can reach by SNMP (fan speed, cpu, cache, memory, etc) is showing up, but all that i need to get by netflow is empty.
    I'm testing on following router:
    Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(3)T4, RELEASE SOFTWARE (fc1)

  • How to view the Users in the Portal Activity Report

    Hello,
    Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
    Please explain me in detail how to view the Report.
    Thnx in Advance
    cheers,
    Murali

    hi,
    You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
    Do see the documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
    Weblog :Portal SP9: Portal Activity Report
    Regards,
    Ganesh N

  • How to view deski report in html format ?

    Hi,
    I use BO XI R2. I use jsp.
    I just want to know how to view deski report in a html format.
    thanks a lot.
    hatoug

    Since you're using JSP, please post to the Java support forum:
    Java SDK Application Development
    or
    SAP Crystal Reports, version for Eclipse

  • How to filter the data in different sections (e.g. Report Footers)?

    Hi,
    I am using Crystal Reports 11 to generate cross-tables.
    I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
    I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
    I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
    How to filter the data in different sections (e.g. Report Footers)?
    Thank you in advance.

    Hi,
    Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
    You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
    Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
    Do the same for all the subreports.
    -Abhilash

  • How to map two different subnets to one SSID

      Hi Experts ,
    we have two offices in same city at different location however we are planning to bring both the office at same location.
    Now lets say site A has controller 5508 configured with 24 AP's with 10.10.10.x subnet for internal SSID and Site B which is shifting to Site A campus has different subnet ( 10.10.20.x )  for same SSID.
    Site B has no controller since they had connection with H-reap and they were using different subnet for internal SSID ( 10.10.20.x ) .....
    Now i need to add their AP's in Site A controller which will be extended wireless LAN however we would like to keep same subnet ( 10.10.20.x )  what Site B has for wireless clients which is really confusing me ....
    I have already client subnet for site A with 10.10.10.x /24 subnet  and nearly 200 users are already using this wireless client subnet....
    How do i add their ( Site B ) subnet / 10.10.20.x  with same SSID configured  which is globally only one SSID  ?
    limitations :
    I can not create new SSID for site B since same will be broadcasting even in Site A AP's
    Is this possible to map one more subnet of site B to existing SSID with already different subnet ( 10.10.10.x ) ?
    Your suggestions will be really helpful for me to go ahead and understand in better manner ...

    Well first off, you need to bring that subnet over to site a without breaking any routing. Once you do that then sites B subnet will have a different vlan than site A of course. Now with both subnets working in site A, you create a dynamic interface on the WLC for that new subnet. Create an AP group for both sites, you can name it by vlan or by any name you want. Now in the ap group for site A, you define what SSID's you want and map the vlan to that ap groups. Then add sites A AP's to that group. You do this also for site B's AP's and map the SSID to the new subnet you brought over and move the AP's to that group. The APs from site B would have to be setup in local mode not hreap.
    Makes sense
    Sent from Cisco Technical Support iPhone App

Maybe you are looking for