How to view run-time errors
Re the example in my last post June 21.
I have moved the code into a class so that I can use the
returned data
instead of just displaying it in a grid and I now get an
error at
compile time 'File contains error', though when I click
continue
everything works exactly as I expect.
How can I get to see what these errors are?
Doug
Oh sorry, yes you're right. I just assumed if no line is
marked with the
red error mark there would be no error. But this error is not
related to
any single line.
The error shows that I don't really understand oop. Are there
any good
lessons or books teaching this?
Would it help to learn Java, or would this just be confusing
since AS3
seems to have quite a number of differences?
I've read through the Programming ActionScript 3 section in
the help
files, but it doesn't give sufficient explanation to
understand how to
adapt what they show to different situations.
What would really help would be examples of use with each of
the flash
and mx methods as there are with AS2.
Doug
ntsiii wrote:
> Do they not show up in the "Problems" tab?
>
> Tracy
Similar Messages
-
How to send Run time errors alerts to email ?
Dear Friends,
I am using SAP CRM ABAP 6.0. I am checking run time errors in ST22 transaction. Usually, i check in morning or evening, based on my free time. I feel, dificully in this. so, i need to configure in somewhere for send this runtime error alerts to my office mail id.
We are sending report outputs to our office id. But, i dont know, how to send run time errors with log or with out log to emai id?
thanks in advance.
Rajagopal
Chennai - INDIAThanks Dieter.
Now, i have set the background job as per your suggestions. but, i have below doubts:
1. I added my office mail id in spool list receipient. This background job alert mail goes to business work place inbox (SBWP). But, i need, in my outlook mail box.
2. This background job gives all months runtime errors. but, only i need today & yesterday only. I checked in ST22 for create variant. Unfortunately, i did not get option. so, how to set variant?
Thanks in advance.
Rajagopal
Chennai - INDIA. -
How to fix "run time error R6025 pure virtual function call"
I instaled ITUNES 10.6.1.7 on W7 at first the program worked ok but after 6 or 7 times that opened it, just when was searchir for a music title the program crashed with the msg above.
I applied instructions in Apple support page about eliminate plug-in files. it worked again but In same way, about 6 or 7 times I opened the program and searched for a title the same problem was shown
ThanksHi I have been getting the same "Microsoft Visual C++ Runtime Library ERROR: R6025 - Pure virtual function call" every
now and then in windows 7 operating system. then i have to wait for some time. The only thing thi sappears when i open My computer (the issue not prevails at times!). The above reply is not clear enough!. Can any one give a better/clear resoln for me!! -
How to clear this type of run time error
good eve,
i am migrating sql server procedures to oracle procedures
i am trying to execute char(39) function in plsql is the following way correct and if this way is correct i am getting
run time error like
create or replace
procedure Sel_subgroup(key in varchar2,gradename in varchar2)
as
gid res_grades.grade_id%type;
gn res_grades.gradename_en%type;
stid sub_topics.subtopic_id%type;
stn sub_topics.subtopicname_en%type;
cc res_grades.countrycode%type;
estid exsub_topics.exsub_topics_id%type;
estn exsub_topics.exsubtopicname_en%type;
d_stmt varchar2(500);
type ref_cursor is ref cursor;
rc ref_cursor;
begin
d_stmt :='SELECT RG.Grade_ID,RG.Gradename_'||key||',ST.SubTopic_ID,ST.SubTopicname_'||key||', RG.CountryCode,
Est.ExSub_Topics_ID, Est.ExSubTopicname_'||key||' from
Res_Grades RG INNER JOIN Sub_Topics ST ON RG.Grade_Id= ST.Grade_ID
INNER JOIN ExSub_Topics Est ON ST.SubTopic_ID = Est.Sub_Topics_Id
Where Gradename_'||key||' = '''||gradename||'''';
open rc for d_stmt;
loop
fetch rc into gid,gn,stid,stn,cc,estid,estn;
if rc%found then
dbms_output.put_line(gid||gn||stid||stn||cc||estid||estn);
else
exit;
end if;
end loop;
close rc;
commit;
end Sel_subgroup;the out screen result is:
Connecting to the database rasool.
Process exited.
Disconnecting from the database rasool.can u please help me,
thanking you,
prakashto samb,
It doesn't look like you are getting a runtime error. Is it possible your query is returning no rows?
If you are sure your query should be returning rows, you probably need to check if DBMS_OUTPUT is enabled in SQL Developer (View menu I think).my query is returning a row
where where 123=key and 'FUBAR'=gradename?
If so, you want 3 single-quotes at the end of the string, not 4:
You sure? I think 4 is correct.i am sure 4 is correct i have tried as per jeenesh said
to jeenesh
SQL> ed
Wrote file afiedt.buf
1 create or replace
2 procedure Sel_subgroup(key in varchar2,gradename in varchar2)
3 as
4 d_stmt varchar2(500);
5 begin
6 d_stmt :='SELECT RG.Grade_ID,RG.Gradename_'||key||',ST.SubTopic_ID,ST.SubTopicname_'||key||', RG.CountryCode,
7 Est.ExSub_Topics_ID, Est.ExSubTopicname_'||key||' from
8 Res_Grades RG INNER JOIN Sub_Topics ST ON RG.Grade_Id= ST.Grade_ID
9 INNER JOIN ExSub_Topics Est ON ST.SubTopic_ID = Est.Sub_Topics_Id
10 Where Gradename_'||key||' = '''||gradename||'''';
11 dbms_output.put_line(d_stmt);
12* end Sel_subgroup;
SQL> /
Procedure created.
SQL> set serverout on
SQL> exec Sel_subgroup('1','TEST');
SELECT RG.Grade_ID,RG.Gradename_1,ST.SubTopic_ID,ST.SubTopicname_1,
RG.CountryCode,
Est.ExSub_Topics_ID, Est.ExSubTopicname_1 from
Res_Grades RG
INNER JOIN Sub_Topics ST ON RG.Grade_Id= ST.Grade_ID
INNER JOIN ExSub_Topics
Est ON ST.SubTopic_ID = Est.Sub_Topics_Id
Where Gradename_1 = 'TEST'
PL/SQL procedure successfully completed.i have also executed your code sir it is executing.in my coding,i found that the part of dbms_output.put_line in my ref cursor loop is not displaying me the print.
to karthick arp
Did enable serveroutput?yes i have enabled it with buffer size 200000
to
Billy Verreynne & Frank Kulash
as per you said sir i have done and got an error my code as follows
SQL> var rc refcursor
SQL> var key varchar2(2)
SQL> var gradename varchar2(30)
SQL> exec :key :='EN';
PL/SQL procedure successfully completed.
SQL> exec :gradename :='PRE-K';
PL/SQL procedure successfully completed.
SQL> begin sel_subgroup(key => :key, gradename => :gradename,rc => :rc); end;
2 /
PL/SQL procedure successfully completed.
SQL> print rc
ERROR:
ORA-24338: statement handle not executed
SP2-0625: Error printing variable "rc"how to handle this error sir -
How to debug a run time error encountered while executing ZFunction Module
Hi all,
My requirement is to create a ZFunction Module that Generated a sales order
for multiple line items and works for both Variant Configurable material and a Normal Material.
I am using BAPI_SLSTRANSACT_CREATEMULTI in my Zfunction Module to create a
Sales order
My ZFunction Module works well if I give normal material as input.
It also works well and generates a sales order if I give all Variant Configurable materials as input.
But if I give both Variant Configurable material and a normal material it throws a run time error.
Can some one tell me what is wrong? can some one suggest me how to debug this run time error
Termination occurred in the ABAP program "SAPLCRM_CONFIG_OW" - in
"CONFIG_TO_CBASE".
The main program was "RS_TESTFRAME_CALL ".
In the source code you have the termination point in line 63
of the (Include) program "LCRM_CONFIG_OWF02".
Source Code Extract
Line SourceCde
| 33| LT_CUXI_CUPRT
| 34| LT_CUXI_CUVAL
| 35| LT_CUXI_CUVK
| 36| LS_CUXI_CUCFG.
37
| 38| PERFORM CREATE_PRICING_CSTIC USING IS_CONFIG-CUCFG-CFGINFO.
39
| 40|* set config to cbase
| 41| CALL FUNCTION 'COM_CUXI_SET_SINGLE_CFG'
| 42| EXPORTING
| 43| I_CFG_HEADER = LS_CUXI_CUCFG
| 44| I_ROOT_INSTANCE = CV_INT_OBJ_NO
| 45| I_LOGSYS = LV_LOGSYS
| 46| IMPORTING
| 47| E_ROOT_INSTANCE = CV_INT_OBJ_NO
| 48| TABLES
| 49| I_TAB_INSTANCES = LT_CUXI_CUINS
| 50| I_TAB_PART_OF = LT_CUXI_CUPRT
| 51| I_TAB_VALUES = LT_CUXI_CUVAL
| 52| I_TAB_VAR_KEYS = LT_CUXI_CUVK
| 53| I_TAB_RESTRICTIONS = LT_CUXI_CURES
| 54| EXCEPTIONS
| 55| INVALID_INSTANCE = 1
| 56| INTERNAL_ERROR = 2
57
OTHERS = 3. 58
| 59| IF SY-SUBRC <> 0.
| 60| if sy-msgno is initial.
| 61| MESSAGE X010 WITH 'COM_CUXI_SET_SINGLE_CFG'.
| 62| else.
|>>>>>| MESSAGE ID SY-MSGID TYPE 'X' NUMBER SY-MSGNO
| 64| WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
| 65| endif.
| 66| ENDIF.
67
| 68|ENDFORM. " CONFIG_TO_CBASEHey Amit...
Can I Create a Sales order for VC and Non VC items using BAPI_SLSTRANSACT_CREATEMULTI
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI
I am trying to create a Sales Order using a Zprogram. I have used BAPI_SLSTRANSACT_CREATEMULTI. If I give the input as Normal material I am able to generate a sale order. If I give the input as VC material I am able to generate a sales order. But if I give both VC and Normal material as input, I get a run time error as follows.
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI that we cannot create a sales order with both VC and Non-VC items or am I missing some data which I need to pass when I give both VC and Non VC items? I get this error only for my Zprogram. But if I try to create an order on screen manually I donu2019t get any error. This happens only if I create an order with my Zprogram.
Some one please help me u2026I am just stuggling to get this doneu2026
I dint find any posts that gives me information about this error.
CUX1 034 u201CNo root instance found in header datau201D
In the source code you have the termination point in line 63 of the (Include) program "LCRM_CONFIG_OWF02". -
How to display "Non-Fatal Run-Time Error In Function Panel" dialog?
I'm learning how to develop an IVI-C specific driver using LabWindows/CVI. When I run my function from its function panel and it returns an error, I would like to display a dialog with both the error code and error message (as opposed to simply returning an error code on the function panel). This would save the user from having to call Prefix_error_message() to translate the error code to its error message. NI-DCPower driver is a good example of this behavior (see attached error dialog). How do I show the "Non-Fatal Run-Time Error In Function Panel" dialog? Any help is greatly appreciated. Thanks!
Attachments:
ErrorDialog.png 8 KBHi Shawn,
Thank you for replying to my post. The checkErr is just an error handling macro defined in ivi.h to goto Error: tag when the function returns a non-zero value. I have been using the checkErr macro (as well as viCheckErr and other macros) in my driver.
Using the same hp34401a specific driver as an example, please allow me to explain my question in more details:
Let's take the hp34401a_close function as an example. It is a simple function with only a few lines of code:
When the hp34401a_close function is run from its front panel using an invalid session handle (e.g. "8" in this screen capture):
You will get three "Non-Fatal Run-Time Error" popup dialogs, one from each of the IVI library functions that it calls: Ivi_LockSession, Ivi_UnlockSession, and Ivi_Dispose. However, there is no "Non-Fatal Run-Time Error" popup dialog from the hp34401a_close itself.
My IVI-C specific driver is behaving identical to the hp34401a specific driver.
In comparison, if run niDCPower_close function from its front panel using an invalid session handle (using the same "8" in this screen capture):
You will only get one "Non-Fatal Run-Time Error In Function Panel" from the niDCPower_close function itself:
I think the behavior of niDCPower driver is much better than the hp34401a driver. It replaces the three "Non-Fatal Run-Time Error" popup dialogs from the IVI library with a single "Non-Fatal Run-Time Error In Function Panel" popup dialog from the driver function itself. I would like to do the same thing with my driver but have not figured out how to display a "Non-Fatal Run-Time Error In Function Panel" dialog. Thanks in advance for your help! -
Run time error on Product view
Hi Guys,
I got a run time error when I open the transaction to view Product /SAPAPO/ MAT1.
The error message says "DBIF_RSQL_TABLE_UNKNOWN" with the description "A table is unknown or does not exist". Whereas, when I verified in the database, the Table exists in the system.
What could be the issue can anyone throw some light on this?
Regards
aarveyHi Suresh,
I checked the database connectivity.. and I am getting the communication back. So there is no problem with RFC connectivity.
I dont know if it helps, I am getting another problem and as u mentioned abt the planning version, may be it helps...
Actually the model is active...but when I go to the product view in IPP, I am getting the error "Invalid planning version"
Regards,
aarvey -
How do I fix this run time error crash on start up?
Whe I start Elements 10, it stops and waits at the "Organize" or "Edit" choice. (normal operation.) I chose edit and it crashes with a C++ run time error.
See if this Adobe troubleshooting document helps:
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Ken -
How to avoid the run time error "java.lang.OutOfMemoryError"
hi
i have written a code to read a txt file ,i used FileReader to read a file . the code is working well for small txt files. but when i tried to read a large file(greater than 2MB), a run time error called "java.lang.OutofMemoryError" appeared .
plz suggest the methods to read txt files of large capacity(greater than 25MB) .if possible give an example.thanks for ur replies
i am new to java programming .i am a student persuing B.Tech final semester .i got struck in my project while reading a large txt file(greater than 3MB) . i am now giving a part of code that i had used in my project .it working fine with the txt files less than 3MB ,but when i am treing to read a file greater than 3MB , it is displaying a run time error "java.lang.outofmemoryerror"
i have tried using "java -Xmx" ,it is working , but is there any better option ??
here is the part of code:
FileReader fin;
al=new ArrayList();
try
fin=new FileReader(filename);
catch(FileNotFoundException e)
System.out.println("File not foumn");
return;
while((i=fin.read())!=-1)
al.add(new Character((char)i));
fin.close();
Object obj[]=al.toArray();plz help me
--santosh -
A run-time-error ,how to solve it
I write a function to return a float64 type pointer and assign the pointer to my defined Pionter "newdata" in my StartCallBack,there's no error,but when I USE "
DAQmxWriteAnalogF64 (gtaskhandle0, leng[0]<=leng[1]?2*leng[0]:2*leng[1], 0, 10.0, DAQmx_Val_GroupByScanNumber, newdata, &written, NULL);",
I get a run-time-error like this : "work.c", line 231, col 121, thread id 0x00007FB4: Array argument too small (40000000 bytes). Argument must contain at least 80000000 bytes (10000000 elements).Why this happen?
My part code:
DAQmxCreateTask ("", >askhandle0);
DAQmxCreateAOVoltageChan (gtaskhandle0, "Dev1/ao0:1", "", -10.0, 10.0, DAQmx_Val_Volts, "");
DAQmxSetTimingAttribute(gtaskhandle0,DAQmx_SampClk_Rate,1000/looptime);
DAQmxCfgSampClkTiming(gtaskhandle0,"",1000/looptime,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,leng[0]+leng[1]);
DAQmxRegisterDoneEvent(gtaskhandle0,0,DoneCallback,NULL);
DAQmxWriteAnalogF64 (gtaskhandle0, leng[0]<=leng[1]?2*leng[0]:2*leng[1], 0, 10.0, DAQmx_Val_GroupByChannel, newdata, &written, NULL);
SetCtrlAttribute (panelHandle, PANEL_REALWRITE, ATTR_CTRL_VAL, (double)written);
DAQmxStartTask(gtaskhandle0);
Solved!
Go to Solution.I do not think so ,when I modificate the channel from "Dev1/ao0:1" to "Dev1/ao0",it works normally ,but I can output only in one AO channel by this way ,rather than in two AO channels.
float64 * volarray(double ti[],double vi[],int num,int len,double looptime)
int k=0,sum=0,m=0;
float64 *p=NULL;
p=(float64 *) malloc(sizeof(double)*len);
for(k=0;k<num-1
if(ti[k]<ti[k+1])
{for(m=0;m<(int) (ti[k+1]-ti[k])/looptime;m++)
p[m+sum]= vi[k]+m*(vi[k+1]-vi[k])/((ti[k+1]-ti[k])/looptime);
sum+= (int) (ti[k+1]-ti[k])/looptime ;
k+=1;
else
{for(m=0;m<(int) (ti[k+2]-ti[k+1])/looptime;m++)
p[m+sum]= vi[k+1]+m*(vi[k+2]-vi[k+1])/((ti[k+2]-ti[k+1])/looptime);
sum+= (int) (ti[k+2]-ti[k+1])/looptime ;
k+=2;
return p;}
float64 * JointVol( float64 *data0, float64 *data1, int len0, int len1 )
{ int i=0;
int totalLen=0;
float64 * P=NULL;
if(len0<=len1)
totalLen=2*len0;
else
totalLen=2*len1;
//totalLen=((len0<=len1)?len0:len1)*2;
P=(float64*)malloc(sizeof(double)*totalLen);
for(i=0;i<(totalLen/2);++i)
P[2*i]=*(data0+i);
P[2*i+1]=*(data1+i);
return P; -
Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors ASSERTION_FAILED
Date and Time 13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
involving the ASSERT statement that should not occur. A runtime error
occurred, either because there was no activation ID entered or because
the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
of the first 8 fields is as follows:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
"/SAPAPO/TIMESTAMP_DIFFERENCE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
Network address.......... "172.16.10.47"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "0002BFAAD700"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "scmprd"
Database type............ "ORACLE"
Database name............ "SCP"
Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Jan 18 2006 20:47:39"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 196923232
Heap..................... 0
Page..................... 98304
MM Used.................. 186636840
MM Free.................. 1895288
SAP Release.............. "640"
User and Transaction
Client.............. 950
User................ "SCMATP"
Language key........ "E"
Transaction......... "/SAPAPO/CCR "
Program............. "/SAPAPO/SAPLTIMESTAMP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
"/SAPAPO/TIMESTAMP_DIFFERENCE".
The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
program "/SAPAPO/LTIMESTAMPU08"
of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
610).
Source Code Extract
Line SourceCde
31 lv_time_int_low TYPE i,
32 lv_timediff_int TYPE i,
33 lv_datediff_int TYPE i,
34 lv_time TYPE t,
35 ls_time TYPE tstr_timestr.
36
37 * check timestamp parameter
38 * ASSERT NOT iv_timestamp_high IS INITIAL.
39 * ASSERT NOT iv_timestamp_low IS INITIAL.
40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
41 IF iv_timestamp_high IS INITIAL
42 OR iv_timestamp_low IS INITIAL.
43 RAISE invalid_parameter.
44 ENDIF.
45 IF iv_timestamp_high < iv_timestamp_low.
46 RAISE invalid_parameter.
47 ENDIF.
48
49 * prepare timestamps
50 * .. split into date and time integers
51 ls_timestamp_high = iv_timestamp_high.
52 lv_date_int_high = ls_timestamp_high-date.
53 lv_time_int_high = ls_timestamp_high-time.
54 ls_timestamp_low = iv_timestamp_low.
55 lv_date_int_low = ls_timestamp_low-date.
56 lv_time_int_low = ls_timestamp_low-time.
57
58 * .. calc date diff
59 * .. check against max. allowed integer difference
60 lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>> ASSERT lv_datediff_int <= lc_datediff_intmax.
62
63 * calc time diff
64 lv_timediff_int = lv_time_int_high - lv_time_int_low.
65 IF lv_timediff_int < 0.
66 ADD 86400 TO lv_timediff_int.
67 SUBTRACT 1 FROM lv_datediff_int.
68 ENDIF.
69
70 * calc total duration
71 lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
72 lv_time = lv_timediff_int.
73 ls_time = lv_time.
74 ls_duration-hours = lv_duration_int DIV 3600.
75 ls_duration-minutes = ls_time-minute.
76 ls_duration-seconds = ls_time-second.
77
78 ev_duration_packed = ls_duration.
79 ev_duration_integer = lv_duration_int.
80 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION /SAPAPO/SAPLTIMESTAMP /SAPAPO/LTIMESTAMPU08 61
/SAPAPO/TIMESTAMP_DIFFERENCE
4 FORM /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3F17 349
COMPARE_ORDER_HEADER
3 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U03 125
/SAPAPO/CIF_DELTA3_COMP_ORDER
2 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U01 871
/SAPAPO/CIF_DELTA3_COMP
1 EVENT /SAPAPO/CIF_DELTAREPORT3 /SAPAPO/CIF_DELTAREPORT3 189
START-OF-SELECTION
Chosen variables
Name
Val.
No. 5 Ty. FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No. 4 Ty. FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254544445444543222222222222222222
F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3EDear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen. -
While creating a student through piqstc getting abap run time error
Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti SwainHi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain -
VB Run time error '1004' in SEM BPS layout
Hi,
When I run a layout and activate the standard SAP macro, a Visual basic error message " Run Time error '1004' " appears.
This error has been resolved after I made the following settings.
TOOLS --> MACRO --> SECURITY --> Trusted Publishers --> check flag "Trust Access to Visual Basic Project".
Does each user has to make this setting? Isn't there a setting for SAP macros to attach a trusted digital signature that automaticaly takes care of this error w/o having each user make this setting?
I heard, a setting has to be made in Trusted Publishers to accept "SAPAG".
But, I don't see this in Trsuted publishers list.
I don't see this error in Excel 97 but in Excel 2003. How do I know which versions of excel gives this error to educate our users about this error.
Appreciate any help.Hi anil1121,
Since this is not a vb.net issue, and based on your description, I would recommend you post this issue in
http://social.msdn.microsoft.com/Forums/en-US/home?forum=officegeneral forum to get supports.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Run Time Error 429 - ActiveX Controls CRAXDRT.DLL Dependancy
Post Author: mhamlyn
CA Forum: Deployment
After upgrading from Crystal Reports 11.0 to 11.5 we have found that when deploying an application and bundling it in Install Shield we continually get an error when trying to view crystal reports:
Run-time error '429':ActiveX component can't create object
From what we can see this is partly caused by the incorrect setup of the craxdrt.dll dependancey file, point to previous versions of business objects i.e.
C:\Program Files\Common Files\Business Objects\3.0\bin
Where it should be
C:\Program Files\Common Files\Business Objects\3.5\bin
Even after editing this file and amending the correct locations we still get this error. Has anybody had any success in resolving this. There are lots of forum posts but no diffinitive answers!
This is an extremelly frustrating problem!
PLEASE HELP!!!!Hi Shane,
Here is another way to create PDF with Macro using another API than Distiller. This API is faster too.
Probably this post is not of interest anymore but here is how I have done it:
1. Download PDFCreator: http://sourceforge.net/projects/pdfcreator/
2. Use the following Macro:
Option Explicit
Sub printPDFmacro()
'Author : Ken Puls (www.excelguru.ca)
'Macro Purpose: Print to PDF file using PDFCreator
' (Download from http://sourceforge.net/projects/pdfcreator/)
' Designed for early bind, set reference to PDFCreator
Dim pdfjob As PDFCreator.clsPDFCreator
Dim sPDFName As String
Dim sPDFPath As String
'/// Change the output file name here! ///
sPDFName = "Facture-" & nclient2 & " le " & Format(Date, "yyyy-mm-dd") & ".pdf"
sPDFPath = "E:\Partenaire Scolaire\Comptabilite\Factures"
PDFFileName2 = sPDFPath & "\" & sPDFName
Set pdfjob = New PDFCreator.clsPDFCreator
With pdfjob
If .cStart("/NoProcessingAtStartup") = False Then
MsgBox "Can't initialize PDFCreator.", vbCritical + _
vbOKOnly, "PrtPDFCreator"
Exit Sub
End If
.cOption("UseAutosave") = 1
.cOption("UseAutosaveDirectory") = 1
.cOption("AutosaveDirectory") = sPDFPath
.cOption("AutosaveFilename") = sPDFName
.cOption("AutosaveFormat") = 0 ' 0 = PDF
.cClearCache
End With
'Print the document to PDF
ActiveSheet.PrintOut copies:=1, ActivePrinter:="PDFCreator"
'Wait until the print job has entered the print queue
Do Until pdfjob.cCountOfPrintjobs = 1
DoEvents
Loop
pdfjob.cPrinterStop = False
'Wait until PDF creator is finished then release the objects
Do Until pdfjob.cCountOfPrintjobs = 0
DoEvents
Loop
pdfjob.cClose
Set pdfjob = Nothing
end sub
Have any questions, just have to poke me.
Michael -
Time_out & TSV_TNEW_PAGE_ALLOC_FAILED Run time error on MB5B
Hi expert,
Time_out & TSV_TNEW_PAGE_ALLOC_FAILED Run time error getting while executing Tx-MB5B.
ECC 6.0
oracle 10g
HPux
Regards,Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 08.02.2012 14:50:11
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "\PROGRAM=RM07MLBD\DATA=G_T_COLOR" could not be further
extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 76
Number of rows: 3
Allocated rows: 3
Newly requested rows: 128 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 5720752
Extended memory (EM)........... 502807584
Assigned memory (HEAP)......... 1842267952
Short area..................... " "
Paging area.................... 40960
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"RM07MLBD" or "RM07MLBD"
"COLORIZE_TOTALS_FLAT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Maybe you are looking for
-
I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name. How can I restore the names to my recent calls list?
-
Dear Sir, Plesae tell t code for print vendor payment advice. Thank & Regards Pawan
-
Custom PLL with GO_BLOCK
Hi please help or suggest. I'm setting a Delivery To Location on Purchase Order Distribution Block required, so that when users a trying to save the record a message should pop up notifying then that they must populate the DELIVERY TO LOCATION addres
-
I need CS4(win7) so I can install CS5 bought as a gift at Christmas
I was given a new copy of CS5 Master Collection (for PC) by well meaning wife, but I don't have CS4 which I need to have in place first as the CS5 is an upgrade to it. Is there anywhere I can get this? It is only needed temporarily so that I can ins
-
I had installed the Sound and Vibration toolkit . When I open Tone Measurements from Tone and Distortion of Sound and Vibration,It can't initializing completely and close automatically . So I can' t configure it , please help to solve this problem,t