How to view shared (NFS) 11g agent status?
I have installed the MASTER agent and the NFS agent on the same host.
Master Location = /app/oracle/ogc/agent11g (note 748535.1)
NFS State Location = /app/oracle/ogc/emstate
I see an agent running in OEM console, but I don't know if its the Master or NFS.
From the operating system I see an agent process running, but again I don't know which agent is up:
$ ps -ef|grep agent11g |grep -v grep
ogc 11421 1 0 Nov08 ? 00:00:01 /app/oracle/ogc/agent11g/perl/bin/perl /app/oracle/ogc/agent11g/bin/emwd.pl agent /app/oracle/ogc/emstate/sysman/log/emagent.nohup
ogc 11452 11421 0 Nov08 ? 00:00:31 /app/oracle/ogc/agent11g/bin/emagentIf I try to confirm the agent status using emctl, it says the agent is not running:
$ export ORACLE_HOME=/app/oracle/ogc/emstate
export PATH=$ORACLE_HOME/bin:$PATH
$ emctl status agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not Running
$ export ORACLE_HOME=/app/oracle/ogc/agent11g
export PATH=$ORACLE_HOME/bin:$PATH
$ emctl status agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not RunningHow can I confirm the NFS status from the command line?
Problem Solved by setting correct PATH:
export ORACLE_HOME=/app/oracle/ogc/emstate
export PATH=$ORACLE_HOME/bin:$PATH
emctl status agentOS command correctly shows agent status.
Similar Messages
-
Photosmart 7520 - How to view on screen the printer status report
How do I view on the monitor or printer screen the 'Total pages printed' figure, which otherwise I need to frequently print out via "Maintain your computer>Device reports>Print Status report"? I'm using HP Photosmart 7520e, wireless connected, Windows 7 Ult. Thanks.
This question was solved.
View Solution.Hello emmandell,
Welcome back to the HP Support forums. I understand that you would like to learn how to view your page count without having to print a Printer Status Report.
The information can be viewed online using the printer's embedded web server (EWS). Please follow the steps below:
1) Press the wireless icon on the front panel of the printer to find the printer's ip address.
2) Type the ip address of the printer into the address bar of your browser, this will bring up the EWS. I recommend that you bookmark this web page for future use. Then please click on 'Tools' tab.
3) Click on 'Reports' along the left hand side menu
4) This will print up a usage screen with the total page count shown across the top
Hope this helps you save on ink and paper.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
IOS 7: How to view shared calendars using apple Calendar server
We use an OS X Server with Calendar server. On OS X you can see shared (delegated) calendars in Calendar by selecting the them in the preferences.
Using iOS 6 one could view shared CalDAV calendars by adding the same account more than once each with a different server URL. A fair bit more work but once configured it worked like a charm.
The Calendar app on iOS 7 still does not show delegated or shared calendars using the Calendar server from Apple. Because iOS 7 does not allow to add a CalDAV account more than once the iOS 6 workaround is no longer possible.
How can I view shared Calendars on iOS 7?See also:
https://discussions.apple.com/message/23105327 -
How to view shared iMovie in iTunes?
I created an iMovie '09 project on my 5 year old Macbook Pro and uploaded it to iTunes. I have a new Macbook Pro and looked for the movie in iTunes but couldn't find it. I checked the iMovie help: http://help.apple.com/imovie/mac/10.0/#movfe89b94a2 but it didn't address how to view it.
James,
I did the movie on my old MacBook Pro because I was modifying an earlier production, both of which used iMovie 09. I simply wanted to use my new MacBook Pro to view it on iTunes. I'm not sure if I burned the DVD of the movie and put it on my new MacBook if I could view it thru the current version of iMovie.
Rikki -
How to view the Design layout for Status tracking in bw 3.5?
Hi all,
I am new to bps 3.5 ? and i have a status and tracking in the development created by some one. i am able to execute it, but then i would like to see the desing layout of it.
How the layout is design.
Can anyone help me on this!!
Thanks
PoojaTo my way of thinking, you do not so much design the STS layout as to customiise or configure the STS. This is done with transaction code BPS_TC. Certainily some admin user will need access in order to adjust the configuration from time to time, to set new dates, people, organisation changes and so on. Different authorizations are required for 'standard' users, 'super' users (with an overview of the whole process. and 'admin' who can configure the STS. But BPS_TC does not allow you to see or to change the layout of STS. (The program can be found from SE80 in BSP Application TUNGUSKA.)
Help is at:
http://help.sap.com/saphelp_nw04/helpdata/EN/ff/3deba47cf511d5b3e30050dadfb23f/frameset.htm
I think you would need a very compelling reason to change the basic design.
Stephen -
How to view other schema's job status ?
Hi,
My application is in schema A. User B has just enough rights to do specific tasks in A. One of them is to call a function that creates a job in schema A.
The view user_jobs in A shows the job.
How can I make this job visible to user B without granting B access to dba_jobs?
I tried granting select on a.user_jobs to B and hoped that the job would show up in B's all_jobs view but that did not work.
Any ideas?
ReneCreate a customised version of USER_JOBS and grant select on the view to B. See catjobq.sql - note how USER_JOBS is based on DBA_JOBS anyway.
I usually have some sort of admin user (which may or may not be the application owner) which owns all these types of customisations.
PS: ALL_JOBS is actually a synonym for USER_JOBS. -
How to view shared gmail calendars?
I have set up my Gmail account, but can not vew other's calendars I have been granted permission to (ie. my husband's calendar that he has shared with me). How do I set this up?
When I am logged into Gmail through the browser, I have this access, but would like to have it integrated with my Calendar app on the iPhone, if possible.You can choose which calendars you see from the Google Sync page.
http://www.google.com/support/mobile/bin/answer.py?answer=139206 -
How to view shared streams in 3.6 and yosemite
So I've upgraded to Yosemite and running 3.6 but now I can't see my shared streams??
Photo sharing is ticked in preferences...
Any ideas???Shared streams are working for me with Yosemite.
Photo sharing is ticked in preferences...
You are using the same AppleID for iCloud as before?
And you have enabled Photo Sharing in the System Preferences > iCloud >Advanced panel as well as in Aperture's Preferences > iCloud Sharing?
If it s enabled everywhere, try to rest the stream by signing out of the Photo stream in system Preferences, restarting the Mac, and signing in again. -
How to View Archived attachment in FI document
Hello Gurus,
We have a issue regarding to view attachment that was attached to Fi document.
Document was posted on last year and some mail attachment attached to that document.
We are able to view the attachment because it is archived.
Could you please let us know any one how to view attachment that is archived status.
Thanks & Regards,
ShanthiHi,
There is no standard procedure for change of BSEG table. You could develop your own using CHANGE_DOCUMENT function module.
Regards,
Eli -
How to increase the the max limit column in pivot view in BIEE 11G?
Hi Experts,
How to increase the the max limit column in pivot view in BIEE 11G?
When the number of column exceed 256 in pivot view, it will generate the following error message as below:
Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.
Error Details
Error Codes: IRVLJWTA:OI2DL65P
Location: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
SQL Issued: 13678~vid1ptgt0v5ubh39gesnauuhl6
For example:
----------------Day
Country-----20120101---20120102---..........20121231
China--------10000---------20000----......Try increasing the Max Rows in Instanceconfig.xml
Path:-Middleware\instances\instance1\bifoundation\OracleBIPresentationServices\instanceconfig.xml
<ServerInstance>
<Views>
<Pivot>
<MaxVisibleColumns>300</MaxVisibleColumns>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>500</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>30</DefaultRowsDisplayed>
</Pivot>
</Views>
</ServerInstance>
Try adding this in the config file and restart the services.
Mark as correct if it is helpful.
Thanks. -
How to view a shared outlook calendar
Hi - I hope someone can help me. I have a shared outlook calender that we all use at work however I can only view my own Outlook calender on my iPhone 4.
Is there any way to view shared calenders?I am guessing this is still the case with exchange 2007..
If anyone has a work around please share -
Polling from the database view in BPEL 11g
Hi,
We do have a requirement of polling from the database view in BPEL 11g. I am exploring the following polling strategies in our case:
- Delete
- Logical Delete
In case of Delete polling strategy, can we delete the record as the view does not allow deletion. In this case, do we have any other way to achieve this functionality?
In case of Logical Delete, We have to mark the status column with particular value. how could we achieve the same when the view is not updateable.
In 10g, we can override the delete polling strategy with an update statement. Is it possible in 11g?
Thanks & Regards
SivaHi,
I am also doing the same thing what you have done, please help me.
I have used BPEL export utility for exporting my JPDs to BPEL. but it was not a good help, ultimately i m creating a process manually.
the main problem what is the replacement of control(jcx files)
please guide me really it would be great help..
Thanks in advance and hope to hear from you.
my mail id is [email protected]
please send some document if you have... -
How to View the Scheduler in ODI Console
Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
ClaudeTo display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine -
How to set the message in the status bar...
hai,
how to set the message in the status bar...
let us say "inserted data successfully, or opening page followed by the link clicked on the screen....."
kindly help me outsunil,
do not use advise by Ashutosh with WebDynpro.
Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
wdComponentAPI.getMessageManager().reportSucces("Record inserted");
VS -
Displaying of charts as a separate column in table view view in obiee 11g
Hi all,
we have a requiremnet where i need to display charts in a separate column in a table view in OBIEE 11g. can any body help in achieving this requirement?
Thanks in advance.
RegardsHI All,
Can any body let me know how to achieve this requirement!
charts also should be dsplayed in a column in table. I had gone through below Sparkline graph link but didn't move forward with Jquery. can any body help me in understanding this?
http://srisnotes.com/tag/obiee-11g/.
Maybe you are looking for
-
I'd love to get an imac but is there a way to upgrade the sound card?
I love the new imac's.. but I would need to upgrade the sound card if I got one. I have a recording studio and i'm using a delta 1010 pci card that is compatible with macs.. I can't see how it would work with an imac.. I'm also a graphic artist and u
-
Use the new functionality "multiple page size" in an indesign book
I've creating an indesign book, in wich one chapter has a different (bigger /A3) page size. Indesign creates the book in pdf using the bigger page size, and do not use the real page size of every chapters. Why? Thanks for help !
-
Is it worth shifting an in house SAP HR + EP System as an On Demand service
Please give positive and negative aspects of considering a SAAS model for our established SAP Time, Payroll and Self Services in our mid sized organization. We are at a decision point to consider on demand SAP services instead of upgrading the system
-
Gray bounding box around moive
A grey bounding box appears around movie when mouse roll over in Internet Explorer. How can I get rid of it?
-
Outlook Contact list - work and home addresses are the same
Most of my contacts (Outlook) have only a Home Address and I leave the Business Address blank. When I transfer the list to my IPOD, the Home Address is listed for both Home and Business Addresse. Anyway to eliminate the Business display if it's blank