How to view shared streams in 3.6 and yosemite

So I've upgraded to Yosemite and running 3.6 but now I can't see my shared streams??
Photo sharing is ticked in preferences...
Any ideas???

Shared streams are working for me with Yosemite.
Photo sharing is ticked in preferences...
You are using the same AppleID for iCloud as before?
And you have enabled Photo Sharing in the System Preferences > iCloud >Advanced panel as well as in Aperture's Preferences > iCloud Sharing?
If it s enabled everywhere, try to rest the stream by signing out of the Photo stream in system Preferences, restarting the Mac, and signing in again.

Similar Messages

HT4557 I don't have the 'iPod ' option in my iPad in settings menu as shown here. I have music option shown. I have 5.1 os installed. How to enable sharing/streaming of music now?

I don't have the 'iPod ' option in my iPad in settings menu as shown here. I have music option shown. I have 5.1.1 os installed. How to enable sharing/streaming of music now?

Yes.
You need to,turn on Home Sharing in iTunes on the computer. The computer and the iPad will need to be on the same wireless network. You will also need to make sure the same AppleID accosiared with your iTunes is also added to the Music app in Settings.

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
"Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff: I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....) I understand the "Reference-monitor" doesn't help either at this.
I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
Software: Premiere CS3 version 3.2.0
Operating System: Mac OS X (v10.4)

You can only do this in the multicamera monitor. That's what it's there for. Proper procedure is to cut there, then go to the timeline and add transitions.
If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

How to view code of all the custom and complex folder folder

How to view code of all the custom and complex folder folder in EUL?

You do not need to run all the reports.
Also i am not sure about why do you need to see the code of every thing, i assume you will not get much from it.
If there is a certain folder you are interested in then this is the way.
Any way there is no way to get the code of the complex folders since they are logical join of other folders.
to get the code of the custom folder s you can use:
select * from eul_us.eul5_objs t
WHERE t.obj_type='CUO'
AND t.obj_object_sql1 IS NOT NULL;
you should look (and concatenate) at the obj_object_sql1,obj_object_sql2.....
Tamir

HT4910 How to view my photos stored in icloud and manage those

HI,
How to view my photos stored in icloud and manage those

Use the PhotoStream tab of the iOS photos app.

How to view the planned orders in mass and how to delete in mass

Hi gurus,
How to view the planned orders in mass and how to delete in mass.
Regards
R.Rajakarthik

Hi,
Use the collective display of planned orders, transaction code MD16.
You can select the data by different options and choose which ones or all that you need to delete.
Click the Delete button to trash them.
This will delete planned orders without deleting the planned independent requirements and sales orders.
Hope it helps

IOS 7: How to view shared calendars using apple Calendar server

We use an OS X Server with Calendar server. On OS X you can see shared (delegated) calendars in Calendar by selecting the them in the preferences.
Using iOS 6 one could view shared CalDAV calendars by adding the same account more than once each with a different server URL. A fair bit more work but once configured it worked like a charm.
The Calendar app on iOS 7 still does not show delegated or shared calendars using the Calendar server from Apple. Because iOS 7 does not allow to add a CalDAV account more than once the iOS 6 workaround is no longer possible.
How can I view shared Calendars on iOS 7?

See also:
https://discussions.apple.com/message/23105327

How to view shared iMovie in iTunes?

I created an iMovie '09 project on my 5 year old Macbook Pro and uploaded it to iTunes. I have a new Macbook Pro and looked for the movie in iTunes but couldn't find it. I checked the iMovie help: http://help.apple.com/imovie/mac/10.0/#movfe89b94a2 but it didn't address how to view it.

James,
I did the movie on my old MacBook Pro because I was modifying an earlier production, both of which used iMovie 09. I simply wanted to use my new MacBook Pro to view it on iTunes. I'm not sure if I burned the DVD of the movie and put it on my new MacBook if I could view it thru the current version of iMovie.
Rikki

How can I make Final cut pro 7 and Yosemite work?

Hi dear Apple.
I have this huge problem with Final cut pro 7 and Yosemite.
I have tried to install it on a Mac book pro that has Yosemite but it doesn't work.
I have an I mac with finalcut pro 7 working on Lion but I need to upgrade it to Yosemite to be able to use CC Adobe.
I have a feature film worth 6,7 million SEK with Final cut pro 7 and I can't translate it to XML files to premiere cause it is in its last editing process. I get an error everytime I try. Also the last version of Fcp (X) ***** for a professional editor. So.. My only option is to finish this film in Fcp7.
How can I use Yosemite and still be able to keep Fcp7?
Please help me or do something about this issue soon. I bought fcp7 for 11000 SEK at the time that was quite expensive.

Hi Meg the dog! Thanx for answering!
I know it was left to die 4 years ago. I just think its ****** up.. I work with documentaries and it takes quite a while to finish. I have done one for 6 years now. If I had known that Fcp7 was left to die I would never had started to edit 6 years ago...
I did try this recommended on the forum by another user:
Go to the app location in finder, CTRL click on the app and choose [Show Package Contents]. A folder [Contents] appears, click on it and choose [MacOS]. You'll see a Unix executable. Double click, you'll start Terminal. At the same time fcp will launch. After fcp is launched, close terminal and confirm when asked. Now fcp is up and running. Close fcp and the next time, just open fcp the normal way. DONE!
But it doesn't work for me. I can't launch fcp7.
I have Fcp7 Installed on my I mac and I wonder if that will effect fcp7 if I upgrade to Yosemte?
I tryed to export XML to work on premiere and this is what happends:
Any recommendations? I am going crazy here..

How to view shared gmail calendars?

I have set up my Gmail account, but can not vew other's calendars I have been granted permission to (ie. my husband's calendar that he has shared with me). How do I set this up?
When I am logged into Gmail through the browser, I have this access, but would like to have it integrated with my Calendar app on the iPhone, if possible.

You can choose which calendars you see from the Google Sync page.
http://www.google.com/support/mobile/bin/answer.py?answer=139206

How to view shared (NFS) 11g agent status?

I have installed the MASTER agent and the NFS agent on the same host.
Master Location = /app/oracle/ogc/agent11g (note 748535.1)
NFS State Location = /app/oracle/ogc/emstate
I see an agent running in OEM console, but I don't know if its the Master or NFS.
From the operating system I see an agent process running, but again I don't know which agent is up:
$ ps -ef|grep agent11g |grep -v grep
ogc 11421 1 0 Nov08 ? 00:00:01 /app/oracle/ogc/agent11g/perl/bin/perl /app/oracle/ogc/agent11g/bin/emwd.pl agent /app/oracle/ogc/emstate/sysman/log/emagent.nohup
ogc 11452 11421 0 Nov08 ? 00:00:31 /app/oracle/ogc/agent11g/bin/emagentIf I try to confirm the agent status using emctl, it says the agent is not running:
$ export ORACLE_HOME=/app/oracle/ogc/emstate
export PATH=$ORACLE_HOME/bin:$PATH
$ emctl status agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not Running
$ export ORACLE_HOME=/app/oracle/ogc/agent11g
export PATH=$ORACLE_HOME/bin:$PATH
$ emctl status agent
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not RunningHow can I confirm the NFS status from the command line?

Problem Solved by setting correct PATH:
export ORACLE_HOME=/app/oracle/ogc/emstate
export PATH=$ORACLE_HOME/bin:$PATH
emctl status agentOS command correctly shows agent status.

How to view .MOS files in Adobe Bridge and Photoshop CS5?

I recently shot with a large format camera and used Capture One to tether during my shoot. I went home to look through my pictures and noticed that the files are .MOS files and they don't open in Bridge or Photoshop. How can I fix this?

Apparently it depends also on whether .mos was shot with compressed or uncompressed format. If uncompressed DNG will work http://www.luminous-landscape.com/forum/index.php?topic=11843.0;wap2

How to view MBean on glassfish v3 server and persistent MBean?

Hi all,
wenn the server restart, i lose all the values of my configuration MBeans, i think it should be persistented on the mbean server, but how to do it? when man use the RequiredModelMBean load()/store() method, please give a example?
i can configuration the MBeans with JConsole now, but how can i see it with glassfish v3?
thanks!

abulseed wrote:
georgemc wrote:
Yeh. You said that in the initial post.I wasn't sure how to fix this situation then.
and i managed to kill itIs that actually a fix? Who knows? Only you.Actually it did fix my issue because i wasn't use the process that was listening on the port. I know i may face a situation where killing the process is not the right option (if it is needed) if you got something in mind please share.No need. I think you've got the point already.

Media server and Media live encoder running, but how do I view my stream?

Ok. This is the first time I have ever used these two programs. I got the Media server running and connected and the Media live encoder streaming and connected to the server. I have not been able to test the stream to see if it is working correctly however, judging by the logs, it seems to be working. What I really want to know is the simplest instructions on how to view the stream from outside of my network, as it is broadcasting over the net. I am trying to do a live stream.
With just these two programs running is there a link I can go to that it will automatically play the stream back?
What exactly to I need to do now to be able to give someone my link over the net so they can watch the stream?
Do I actually need a server to put the /applications/live folder onto?
Thank you!
(ps I have been reading the adobe documentation on this but I'm still confused)

I am certainly no expert as I have just started working
with this myself. But I will try to help.
To view the stream you need a client. As started in the Flash Media Server Development Guide:
You can use any of the following clients to play video streamed from the live service:
Flash Media Server sample video player (RootInstall/samples/videoPlayer)
Flash FLVPlayback component (fl.video.FLVPlayback)
Flex VideoDisplay component (mx.controls.VideoDisplay)
Any custom-built application that runs in Flash Player, AIR, or Flash Lite 3
You can pick up this link at http://help.adobe.com/en_US/FlashMediaServer/3.5_Deving/WS5b3ccc516d4fbf351e63e3d11a0773cf ae-7ff7.html
I have a very basic example of a custom-built player that does work - I'm running FMS Dev (localhost) and a webcam. Let me know if you need the example.
Good luck. I hope more experts will start to post help, as I am struggling with some things myself.
Phillip

Add photos to shared stream

Hi all.
Hope my English be comprehensible :-)
Yesterday evening at home I created a shared photo stream from within iPhoto on my Mac Book Pro (Mountain Lion, iPhoto & Aperture all with last updates).
I added two shots and shared them with one of my collegues adding her Apple ID. This morning she showed me the shared photos on her iPhone, as expected.
Now she can add a comment (this is ok) but she cannot add a photo to that stream: this is not a serious problem, but I wondered if it is possible to grant her some additional permission.
I looked in Apple documentation and found 3 links with different answer to my question.
Look here:
from http://support.apple.com/kb/HT5902?viewlocale=en_US
Can my friends and family add photos or videos to a shared stream that I created?
Yes, if you allow it. When editing your photo stream to add or remove subscribers, you can turn on the option to allow subscribers to add to your shared stream. Subscribers can contribute photos and videos to your shared stream if they have an iCloud account and a compatible device with up-to-date software.
But look here:
from http://support.apple.com/kb/PH11957
Note: You can add photos only to photo streams you create. You cannot add photos to shared photo streams you subscribe to.
and here:
from http://support.apple.com/kb/PH11964
Note: You can add photos only to photo streams you create. You cannot add photos to shared photo streams you subscribe to.
May be I'm missing some detail or misunderstand contents.
Now I'm at work, so cannot access my MBP, anyway I do not remember to have seen such an option when adding subscribers ...
How does it really work ?
Many thanks !

Update...
It seems something related to Os version.
A friend of my with iO7 on IPad told me he can add an Apple ID to a shared stream created by himself and let subscribers post on it, while on iPhone with iOS6 is not possible. After upgrade to iOS7 on iPhone the option appeared; anyway, I still cannot post on that stream from my MBP
Waiting for OSX Mavericks to try again...

How to view shared streams in 3.6 and yosemite

Similar Messages

Maybe you are looking for