How to view subscreen in exit
hi to all!
i have created screen exit for me23 (added some fields in sub screen).. for that i used SAPLXM06 exit ..and when i executed me23 i did not know how to view my own sub screen... anyone help me.
Hi Suresh,
Try creating a project using CMOD transaction, assign the enhancement MM06E005 to it and activate.
Regards,
Poornima
Similar Messages
-
How to view the table at the application level
Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
MaheshHi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
FIELD,
END OF W_ZMARD.
EXEC.
OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max -
How can we find the exit being implemented in a project.
Hello,
Very Good morning!
How to find the impelementd exit for a given transaction
How can we find the exit being implemented in a project and to find it's source code?
Any Suggestions would be appreciated...
Regards,
KittuHi,
Ways to find the exit triggering in the source code:
1)first way
1) If you hav that FM exit that was listed r used.
2) go to se37 and type that FM
3) In the source code of that FM double click the type of Message or
exit result which has the Z<include>.
4)IN order to disable the exit->
utilities->system->sattus->program->attributes->package
find this package
5) in SMOD->Prject->F4help->giuve package name-give the found ones
But here we cant see the implementation.
2) second way
1)goto SE37
2)Give FM name
3)/h(Debugging on)
4) Display
5) Break points->statements->(messages if used in exit)->execute
Click on f5 until that Exit is triggered
6) go and find out for each type of exit message shown ie til that exit functionality is
actually triggered
7)once u find that exit ur looking for->
8)GOTO->SOURCECODE->give the include name that is found in debugging when exit is encountered
9)copy this include name(ZX..)->keep a comment forthat exit in this include(ZX..) inorder not to process.
10) se38->Zincludename(ZX..) and comment the code.
11)save check n activate
->SE37->
FM->name
we can now view FM.
3) third way
1)FM->Name
2)/H
3)Break point at CALL CUSTOMER-FUNCTION statement
4) It will stop at this exit.
Reward if helpful.
Best Wishes,
Chandralekha -
Bridge - How to view image in full screen resolution
In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?
The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge. Maybe I am not following you. Sorry
-
Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
ThanksHi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant -
How to view my macbook pro retina on a iMac late 2009?
How to view my Macbook Pro Retina on a late 2009 27" iMac? Note: Mini DisplayPort won't fit.
Hi rainson,
Here is a list of video adapters and the Mac models they can be used with:
About Apple video adapters and cables
http://support.apple.com/kb/ht3235
This article describes Target Display Mode, which may also be useful for what you are trying to do:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Cheers!
- Ari -
I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.
When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
You can read about PDF/A files in the Help. -
How to view the sql query?
hi,
how to view the sql query formed from the xml structure in the receiver jdbc?You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
Parameter type: boolean
Parameter value: true for any string value, false only for empty string
Parameter value default: false (empty String)
Available with: SP9
Category: 2
Description:
When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek -
How to view errors if bulk collect has thrown errors
Hi,
I have few questions.
1.How to view error whether bulk collect is successful or not
2.What is identified & unidentified relationships in ERWIN
3.How to see the errors whether the sql loder is successful or not
and how to open the log file.Is there any specific command in UNIX
which tells loader is successful or thrown error
4.When executing the pl/sql procedure from UNIX.how to check for errors.
Please provide the answers for this
ThanksUse SAVE EXCEPTIONS clause in your FORALL loop.
Is this for homework/test? -
How to view deski report in html format ?
Hi,
I use BO XI R2. I use jsp.
I just want to know how to view deski report in a html format.
thanks a lot.
hatougSince you're using JSP, please post to the Java support forum:
Java SDK Application Development
or
SAP Crystal Reports, version for Eclipse -
How to view and edit .md file (text file) via Documents To Go app
Could some one please let me know how to view a text file with .md as the file extension using Documents To Go app? If this is impossible, which app do you recommend.
.md is a markdown fileHi,
I believe I have my answer now, or at least a good thread on the subject going hear:
http://forums.java.net/jive/thread.jspa?threadID=45148
Thanks,
Mark -
Hello, can someone help me by telling me how to view my flash drive on an imac? I have it on a port but cant find it even using finder. Thanks!
If you think repeat yourself three times makes your problem clearer?
It does not.
Details are needed.
Allan -
How to view the Users in the Portal Activity Report
Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Muralihi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N -
How to View the Scheduler in ODI Console
Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
ClaudeTo display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine -
HOw to view the records in a structure qaqee ?
hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advanceHello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh
Maybe you are looking for
-
Also tried "Reset all FF printer settings", no "print_" files.
-
On Hand qty.while raising the PR
Hi All, While raising the new PR(Purchase Requisition) for particular item, I have entered the item in the line. Now can I see the on hand qty. for that item without using Item Inquiry. Or is there any personalization can be done to see the stock? Th
-
What happened to Allocation & Forecast in OLAP 11gR1 (AWM)?
Hello all, Does anybody know what happened to allocation and forecast features in OLAP 11gR1 (AWM)? These were available as step types in "Calculation Plans" in 10gR2. In 11gR1 "Cube Scripts" seems to be the descendant of "Calculation Plans"; but the
-
Conditional Statements, student working on finals... help =(
Please help me! I have been working on finals since 8 am just today... it is now almost midnight and I am exhausted! Can someone please help me??? What I'm trying to do is simply click on a button and then have a info box i have created show up. I ha
-
New vpn conncetion using Cisco Anyconnect Secure Mobility Client
(Not sure if I'm in the right forum.) I'd like to connect via VPN to complete work tasks while not on the network. My Windows 8 laptop came with Cisco Anyconnect Secure Mobility. How do I or where do I go to add the new settings for this new vpn lo