How to view synchronous messages in sxmb_moni

Hello,
I have set the following parameters in sxmb_adm and still couldn't see the messages in sxmb_moni. Any help is appreciated.
::RFCADAPTER     ::     
LOGGING       --->     3
::RUNTIME     ::
LOGGING     --->     1
LOGGING_PROPAGATION  --->1
LOGGING_SYNC     ---> 1
TRACE_LEVEL     --->3
TRACE_LEVEL_PROPAGATION  --->     1
with Regards,

Hi Shafi
Check this thread,
Missing Messages - in RWB but not sxmb_moni
close the thread if it solves your problem.
cheers
Sameer

Similar Messages

  • How to view successful messages in SXMB_MONI?

    Hi,
    i have a new XI and i only find failed messages in the sxmb_moni. i want to see even all successful messages.
    where i can activate that?
    Thanks,
    Robert

    >>i have a new XI and i only find failed messages in the sxmb_moni. i want to see even all successful messages.
    Check if you have choosed the Status Group in moni as Errors/System Error/Application Error.
    If so change it to Processed Sucessfully and execute the moni.
    I suggest you t choose none(i.e Blank entry) from Status Group so that you can view all the messages.
    Thanks
    SaNv...

  • Restarting synchronous messages from sxmb_moni

    Hi,
    Please could anyone confirm if it is possible to restart synchronous messages from sxmb_moni.If in case the synchronous message is in error in moni,can it be restarted.
    Thanks and Regards,
    Induja

    hi,
    check these links:
    /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages,
    Is Payload of SXMB_MONI stored in Some table?
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Thanks,

  • How to delete the messages from SXMB_MONI which are already cancelled .

    Hi All,
    The messages were earlier in System error(Red flag) state so i cancelled it manually.
    I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
    if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
    can any tell me the procedure of doing it.
    thanks
    Sai.

    Hi AmitSri,
    Thanks for u r reply,
    What is retention period, where can i find this option.
    And i don't have authorizations to sxmb_adm --> configure delete procedure
                                                                             --> Define interfaces for archiving and retention period.
    and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
    Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
    Thanks
    Sai.
    Edited by: sai_SHA on Aug 17, 2011 12:29 AM

  • How to delete the messages from sxmb_moni with status cancelled

    Hi ,
    how to delete the messages from sxmb_moni with status cancelled
    Is there any report for this
    Regards
    Suman

    I think just for deleting the jobs you can do this only
    Scheduling Delete Jobs
    To schedule delete jobs, proceed as follows:
           1.      In the Integration Engine -
    > Administration menu, choose Schedule Delete Jobs.
           2.      Select the job(s) to be scheduled.
           3.      Specify the start time and date.
           4.      Specify the period you want to use and choose Schedule.
    For an overview of all jobs, choose Jobs.

  • How to retrive archived messages in sxmb_moni

    Hi,
    My client  want to see specific date archive messages, how to see those messages in SXMB_MONI window.  Let me know any standard program and procedure.  I am using PI 7.0 version SP19.

    Follow the below to activate your infostructure,then you should be able to see archived messages.
    1. start SXMB_ADM
    2. choose Schedule archiving jobs
    3. click "Archive management"
    4. click "Information System"
    5. click "Customizing"
    6. choose "Archive Infostructure" for Object "BC_XMB" and activate it by clicking on "Activate" button.
    7. go back and click on "Status".
    8. click on "Status per Infostructure"
    9. select your object "SAP_BC_XMB" and click "Fill Structures"
    10. run it as a background task
    Thanks
    Aamir

  • How to view the Messages on the Stream Queues in the MQSeries Explorer

    Hi,
    After you publish the data to the stream queue (SYSTEM.BROKER.DEFAULT.STREAM), how to you see the data on that stream using the MQSeries Explorer.
    I could not see any data on the stream, but I have confirmed that the messages are being published because after I register the subscriber, the published messages do get routed corectly.
    Is there a way to view published messages on the stream queue. any help would be greatly appciated.
    Thanks,
    Rushabh

    Thanks for replying..but what if there are no subscribers registered for that particular topic and the publisher keeps on publishing the messages for a topic. I suspect there should be some way of knowing for the publisher whether it published the messages on the stream queue or not and hence some way of viewing the messages on the queue via the MQSeries explorer..
    Thanks,
    Rushabh

  • How to view the messages stored in my memory card

    hey..
    i have just bought the c6-01..and my prev memory card has my messages which are imp ..is there a way frm which i can view those messages 
    thank u

    Symbian^3 currently has no way of looking at stored messages in the memory card. If you would like to access them, load the memory card back to your old phone and sync them to your PC via Ovi suite where these messages can be read on the program. You can move these to the C6-01 via Ovi Suite should you desire to do so.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Need to store the synchronous messages in SXMB_MONI for 7 days

    Hi Experts,
    We have a business requirement where we need to store the sychronous messages in SXMB_MONI
    Regards
    Hemanth

    Hi Hemanth,
    If you check the below threads/links pointed by the SCN members and me you need to do two things mainly:
    - Set up the sync monitorization. (It looks right with the information that you have pointed).
    - Programming the archive/deletion messages. This depends about your PI version and about if you want to archive/delete the messages in the ABAP or in the Java stack. Check this documents/blogs/threads:
    Archiving & Deletion of messages in PI - Part 1
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?quicklink=index&…
    Archiving of messages in PI 7.3 (Dual stack)
    Regards.

  • Unable to view the messages in sxmb_moni - Quality System

    Hi,
    We have got a strange problem in the diaplay view for  TCode - sxmb_moni for our Quality system. 
    We have different scenarios - Idoc to Web Service (synchronous using BPM), Proxy to Web Service both inbound and outbound etc all to the same Webservice.
    Whenever a scenario executes in the Development system, we are able to view the WSDL data that is sent to the Web Service along with the response given by the Web Service in all the cases successfull or unsuccessful.
    But if the scenario is executed in the Quality system there are a few different cases for the display view in sxmb_moni :
    Case 1 ) Incase of IDoc to Webservice "Successfull " (ECC -> PI-> Webservice)Scenario we are able to see only the data that is sent to the Webservice. We are not able to view the WSDL sent to the Webservice and the Response received.
    Case 2)  Incase of IDoc to Webservice " Unsuccessfull / Error " (ECC -> PI-> Webservice) Scenario We are able to view all the data that is sent to the Webservice right from the Idoc to BPM, the WSDL, the response received.
    Case 3) In case of Proxy scenarios both inbound and outbound "Successfull ", we are neither able to view the data that is sent to the Webservice or the response received from the Web Service.
    Case 4 ) In case of Proxy scenarios both inbound and outbound "Unsuccessfull ", we are able to view only the error and not the data that is exchanged between both the systems.
    The point to be noted is that in case of Successfull executions the data is well received at the Web Service end.
    What could be  possibly missing between the two systems Development and Quality due to which we are not able to view messages in the T-Code SXMB_MONI
    Thanks a lot for all the inputs!

    Hi Lalit,
    In sxmb_ad transaction, go to configuration integration engine (edit) and set Trace Level = 3.
    See that:
    The specified item was not found.
    Regards,
    Carme.

  • How to view any message number

    Hello Gurus,
    I want to view message number Message no. 8I478. How can i what this message contains and i also want to know how to diagnose it.
    Points will be awarded
    Thank you

    Hi
    T code SE91
    There in message class you give 8I
    message number 478
    you will get message
    assign points

  • How to view Output Messages in the LabWindows UI?

    In my LabWindows/CVI I would like to view the output messages that are sent from sequences:
    "RunState.Engine.NewOutputMessage(Parameters.Messa​ge).Post()"
    I thought there might be a TS UI Control like the one in the sequence editor called Output - but I can't find one.
    So far I have managed to catch the message type (TS_UIMsg_OutputMessages) but I can't actually get the string from the event.
    Does anyone have an example of doing this?
    Thanks,
    Ronnie
    TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009

    Ok, let me see if I can explain how to do it more clearly then.
    1) Create a new OutputMessages collection using TS_EngineNewOutputMessages(). This collection will store your own private copy of the output messages. You can hold onto and add to this collection if you want to store them. If not you can just close the handle to free it once you are done with it.
    2) When you get the UIMessage you need to get the ActiveXData property of it. I think the CVI function should be called something like TS_UIMessageGetActiveXData(). The CAObjHandle you get back from this function is a different OutputMessages object that you should NOT hold onto (because of multithreading reasons), you should instead close the handle before returning back from your UIMessage handler. Before doing that though, you should use the TS_OutputMessagesCopyMessagesToCollection method to copy the messages from this OutputMessages object to the new one you created in step 1) above (i.e. you are making your own private copy of the messages and leaving the ones in the UIMessage unchanged (again, it is for multithreading reasons that it must be done this way to avoid race conditions).
    3) You now have a copy of the output messages from the event in your own private OutputMessages collection that you created in step 1) above. You can now access it to get the info for the output messages.  You can get the number of items it contains (and it might contain more than one), by using the TS_OutputMessagesGetItem() function and using CA_VariantInt(index) to package the integer that you pass for the index parameter.
    4) Getting the item gives you an OutputMessage object (notice no plural). You can get information about the output message using the methods and properties of the OutputMessage class (see the online help for more info). There is more to an output message than just the message text. There is also a timestamp, category, location, icon, id, severity, color, etc.
    If you need more information please let us know specifically what you are having trouble with or need more information about.
    Hope this helps,
    -Doug

  • How to set Synchronous message deletion retention period in AE

    Hi,
    Please advise how to configure rentention period message deletion in AE for synchronous transaction. Because currently the syn message always deleted within 24 hours. and xiadapter.outbound.persistDuration.default = 2592000000 [ms] parameters is only for asynchronous.
    so i can see yesterday transaction in message monitoring for Best Effore.
    FYI : the current configuration is to turn on Synchronous log in integration Engine.
    Thank You and Best Regards
    Fernand

    SAP help explains it: http://help.sap.com/saphelp_nwpi71/helpdata/en/2f/88084136b5f423e10000000a155106/frameset.htm and http://help.sap.com/saphelp_nwpi71/helpdata/en/05/b1b740f83db533e10000000a155106/frameset.htm

  • How to view ALL messages on iOS6?

    Before the update to iOS 6 you could keep spamming  'Load Earlier Messages' but now they've changed it to a much more inconvenient way!
    You now have to click 'Load Earlier Messages' scroll to the top, click 'Load Earlier Messages' scroll to the top, rinse and repeat. Now when you need to view a couple of months old message this takes absolutely ages!
    This is ridiculously more inconvenient and tedious, so is there any way to change it back to the old method where the screen was always at the top of the 'page' or is there a faster way than click, scroll, click, scroll to get to previous messages?
    Thanks.

    Tap on the time at the top of the screen to automatically scroll back to the top of the list (and the buttons).
    If you're really in a hurry, use one finger to hit the button and another to hit the time.

  • How to view archived messages in XI

    Hi All
    we have recently done some settings in integration engine level to archive messages older than 3 months. it works fine.. However, as per current requirement, we need to analyze message ran approx 4 months ago. Is there a way to see archived messages? If so, can any one guide me ?
    Thanks in advance.

    Open sxmb_moni and there you will find archive option too.
    Regards,
    Prateek

Maybe you are looking for

  • Transfer a file to a protected directory

    Hi, I'm trying to save a file in a directory that is protected by userid and password. I'm using FM GUI_DOWNLOAD and receiving the exception GUI_REFUSE_TRANSFERFILE. Have someone already done this? Thanks a lot, Flavio.

  • Why can't I create a new multicam clip?

    Just getting started with FCP X (10.0.5).  I have imported from 3 cameras shot at the same time, but the clocks were not necessarily synchronized. I select multiple clips, and "Create new multicam clip" menu item is grayed out.  The only time it is a

  • My iPod Touch 4g will not charge or sync

    I have plugged my iPod into 2 different computers (one mac, one PC) using 2 different Apple iPod cords and I cannot get the iPod to charge.  The computer does not recognize the iPod as being plugged in, so I cannot sync either.  Basically nothing hap

  • Line itemwise Purchase details

    Please help me get the logic to make a z report of purchased items (line itemwise) indicating the basic qty, basic value, excise duty, cess, Add. Excise Duty, freight, etc. Please tell me the tables and fields to pickup. Thanks in advance Shuvir

  • If lenovo wants to make a new version of s10-3t , they have to read this

    1- lenovo s10-3t need to be more solid 2- it needs at least 8cell battery which is small in size and light in weight 3- they need a better processor (core 2 duo - or higher) 4- they need windows 8 5- they need a display with perfect angle of view (ta