How to view tagged images from the camera in Lightroom?

How do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far. Any solutions welcome please.

There isn't a way to do it that is part of Lightroom. There is a plug-in that might help you, though. Check it out here: Locktastic
It doesn't say if its compatible with LR4, but you can try it to find out.
Plug-ins aren't usually as efficient as built-in functionality (like PM), but it might be a solution for you.

Similar Messages

Does anyone know how to view Tagged messages from the Blackberry??

As most of you Tagged is another site pretty much like Myspace. I can get my emails letting me know that I have a Tagged message, I can even see the images of the person sending them. However, when I go to the Tagged site it says its loading but the messages never download. Thanks in advance.

unfortunatly i dont think there a silution unless they make a none flash version or moblie version after reading the following ....
"All of their messages and friend adds and all that is done in Flash, so it won't load/come up anyway because the BB Curve can't support Flash. So, I guess it's all for naught."

I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1 do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

I am downloading from a Canon 650d TO Photoshop CS5.1 and Adobe Bridge CS5.1 Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes.
If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
Camera Raw plug-in | Supported cameras

How can I copy photos from the camera roll to an album in ipad?

How can I copy photos from the camera roll to an already existing album in ipad?

If you are in thumbnail view in the Camera Roll, tap the Edit button in the upper right corner. Tap the photos that you want to add to the existing album. Tap - Add To - in the upper right corner and then tap - Existing Album.
You can only add camera roll photos to albums that you have created on the iPad. You cannot add them to albums that you synced from iTunes.

I have an Air running Mountain Lion. I also have a digital point-and-shoot camera, but have never downloaded any images from the camera to this Air. If I connect the camera to the Air, what might I expect? Will connecting the camera to the Air by a cable

I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?

Answered. Thanks.

HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

How can I see images from my camera using the HDMI cable? Is there an app to transfer jpgs?

I want to preview images from my Nikon DSLR on my ipad2. It would also be nice to see the same video when the camera is in live mode. I bought the Apple ipad-to-HDMI connector and an hdmi (camera to connector) cable. Everything hooks up but nothing happens when I take a picture or view a pictures on the camera.
Do I need an app for this?
I know there is a USB based camera connection kit too - however I was hoping to have the HDMI also for outputing to a projector

That cable set up you have is probably not going to work. The iOS devices seem a little sensitive to having the right connector for the right job. I have the USB connector (and the HDMI one too) which is in 2 parts: mini USB link and SD. My older Nikon D70s does not use SD cards, so I use the cable. When connected any images on the card (in the camera) are displayed in the built-in Photo app in an Imports album. Just touch the Import button and all are brought in. I use RAW and have found that the RAW images are transferred to the computer (MacBook Pro + Aperture) when I get home. A comparison (I kept the images on the card and imported from that too) shows that the resolution/size is identical. As an additional note as you mentioned this, video clips work the same.
With all the connectors, I carry a small bag for the devices I work with.

How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

Hi,
I have : - IMAQ1394 2.0.1
              - NI Vision 7.1
In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
    Dim Image0 As New CWIMAQImage
    imaq1394SnapCW(sid0,Image0)
    CWIMAQViewer1.Attach Image0
Now,How can I do this in VC++6.0?
    I tried:
              C_CWIMAQImage m_imgViewer1;
              m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
              m_CWIMAQViewer1.Attach(m_imgViewer1);
              imaq1394SnapCW(Sid,m_imgViewer1); <--there is no "imaq1394SnapCW "function in VC++,why?
    Please help me!
    Thank you!

For people looking back at these old posts regarding
CWIMAQViewer - it was not made to be used in the C environments and is made
for VB.
Refer to the following locations for displaying images in C
environments:
Start»All Programs»National Instruments»Vision»Documentation
Start»All
Programs»National Instruments»Vision»Text Based Examples
Make
sure that you look at the examples and documentation that is in
reference to the C environments not the VB environments
Vince M
Applications Engineer

IPhone SDK: Saving an image from the camera rotates it

When I use an image retrieved from the camera and try to save it to the disk, it always looks rotated -90 degrees. Anybody else have this problem? Or know what's going on? What's the easiest way to just rotate it 90 degrees?
<code>
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *writablePath = [[paths objectAtIndex:0] stringByAppendingString:@"/newImg.jpg"];
NSData * imageData = UIImageJPEGRepresentation([UIImage imageWithCGImage:cameraImage,1);
if (imageData != nil) {
[imageData writeToFile:writablePath atomically:NO];
</code>

Hi - I've found this post that might describe a similar (or same?) issue.
http://discussions.apple.com/thread.jspa?messageID=7936896&tstart=0
Hope that helps. You've gotten much farther than me - I'm still trying to figure out how to capture camera images using the SDK for a personal photo application. I couldn't find any mention of it in the UIImage Class Reference. Do you know where I might find docs on how to do it?
Thanks

How do I retrieve images from the iPad simulator's Photo app?

I created some images with my app running in the ipad simulator and redorded them in the photos app.
How do I retrieve these images from the iPad simulator to my mac?
Thanks in advance! =]

Hey ArmidaKers,
Thanks for using Apple Support Communities.
This article explains how to restore a backup from iCloud.
iCloud: Restore your iOS device from iCloud
https://support.apple.com/kb/ph12521
Have a nice day,
Mario

How to paste an image from the database by creating a new page?

Hai,
i'm trying to paste more than 6 images in two pages...
The condition is that i want to paste only 3 images in a page.
When the first 3 images were pasted... i want a new page to be automatically created and the next or 4th image will be pasted on the
next page...
i have codings for creating a new page and for pasting the image...
But how shall shall i paste the 4th image in the next page...
Can any one plzz explain me...

>
Hi, I'd like to display a dynamic image from the web inside a JLabel or any other swing component it could work in. I've been looking on the Swing tutorials and others forums, all I can have is that a JLabel can load an Icon object, defined by an image URL, but can this URL be like "http://xxxxx/image.jpg" somehow or can it only be a local image URL?>
I do not know why you start talking about an image on the web then go on to show concerns about whether it will work for a 'local' URL.
But perhaps this answer will cover the possibilities.
So long as you can from an URL to the image, and the bytes are available for download (e.g. some web sites wrap a direct call to an image in HTML that embeds the image), the URL based icon constructors will successfully load it.
It does not matter if that URL points to
- a web site,
- a local server ('localhost'),
- an URL representation of a File on the local file system, or
- it is inside a Jar file that is on the application's run-time classpath.
How you go about forming a valid URL to a 'local resources' (or indeed what you regard as local resources) is another matter, depending on the form of the project, and how the resources are stored (see list above).
Probably the main reason that examples use images at a hard coded URL on the net is that it makes an 'image example' self contained. As soon as we compile and run it, we can see the result. I have posted a few examples like that on these forums.
Edit 1:
BTW - Welcome to the Sun forums
Edited by: AndrewThompson64 on Apr 21, 2009 12:15 PM

How do i delete pictures from the camera roll, but keep them in different albums?

i have added pictures from my camera roll into different albums. but every time i try to delete the ones from the camera roll, it asks if i want to delete the picture from everywhere or cancel. how do i keep them in the other albums, but delete them from the camera roll?

You can't because the actual photo is in camera roll. The albums only contain links to the photos. If you delete the photo from camera roll it will be gone from your phone and therefore also removed from any albums that contain links to it.

Does iPhone Packager CS 5.5 support camera access and LOADING images from the camera roll?

Flash CS 5 only supports SAVING to the camera roll, not loading image from it. And it has no access to the camera to take pictures and access the image within the app.
Does Flash CS 5.5 do these things? There's no point in upgrading if it doesn't support these core feature that I need.

Hi.
Just got an app rejected because the popover to select the pics from the camera roll on the iPad always appears on to-left corner, and the arrow doesn't point anywere, and should be pointing to the button which activated it. That "does not comply with the Apple iOS Human Interface Guidelines, as required...". On the iPhone there's no issue because it takes over the whole screen. More from the apple rejection message:
"Specifically, we noticed your app contained popover elements that didn't point to the element that revealed them. To avoid user confusion, a popover element's arrow should point to the element that revealed it."
So, thanks for including the CameraRoll functionality, but it will be useless in the iPad apparently
Any workaround to make it appear at a specific place when calling myCameraRoll.browseForImage() ?
Fernando

How do you copy images from the internet and paste them on Microsoft Word

I'm trying to copy images from the internet and trying to paste them on to Microsoft Word and Powerpoint for an assignment but it's not working. I tried to use copy and paste and then paste special but nothing is working. Saving the image onto documents and trying to open them on Microsoft Word still doesn't work.
PLEASE HELP!!!
Thank you

Hi Lily, and welcome to Apple Discussions.
A screenshot can capture almost anything you're viewing. Hold the command and shift keys down, then press the 4 key and release all keys. Hold down the mouse button and drag the cursor to the size/area of the image you want to capture. Release the mouse button and you've captured the image. Remember that it is the individual's responsibility to respect copyright laws.

How to view tagged images from the camera in Lightroom?

Similar Messages

Maybe you are looking for