How to view TDMS control table?

After the domain level assignment is done for a rule, I want to verify the table assignment details in the TDMS control tables.
Could you tell me which transaction to do above verification?
Thanks!

David- have you checked CNVMBTDOMS ?

Similar Messages

How to view data in tables by selecting the synonym from the database objec

I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?

This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric

How to make a control table with the same number of rows of its itab

I'm creating a control table, but it always have the maximum number of lines possible.
How can I make it so that it has only the same number of rows of it's internal table?

solved partialy with this:
MODULE locka_lin OUTPUT.
DATA: lin TYPE i.
DESCRIBE TABLE t_obj LINES lin.
table_con-lines = lin.
ENDMODULE. " OUTPUT
but it still doent work when lin = 0
any simple way to solve it on that case?
Edited by: RagnaRock on May 5, 2010 6:00 PM

How to view exchange rate table in essbase?

Hi,
I have created exchange rate table in Hyperion-Planning application.
Now I have to view that exchange rate table in essbase.
By using HSP_rate...? is it the write answer to view the exchange rate table?
If I am wrong then Could you please tell me how to view the exchange rate in essbase?

Hi,
Exchange rates are stored in the Planning Relational store and refreshed to Essbase. Below is a guide to help you find exchange rates that Planning should have refreshed to Essbase in, for example, Essbase Excel addin.
You can set up the Essbase Excel addin to look at the following intersections, for example:
Rows
Accounts
HSP_RateType
HSP_Historical
HSP_Average
HSP_Ending
HSP_Rates Dimension
HSP_Rates
HSP_Rate_USD
HSP_Rate_AUD
HSP_Rate_CAD
HSP_Rate_JPY
HSP_Rate_GBP
HSP_Rate_EUR
Columns
Months of the Fiscal year's rates you want to see.
Other Selections
Select the specific Scenario (i.e. Forecast, Actuals)
Select the specific year the rates were entered to (i.e. FY02, FY03)
Specify the TOP LEVEL of Versions, Entities, or Currencies.
If the retrieval informs you that you must select a value for any required custom dimensions, make sure to select the top level member for that dimension on your spreadsheet.
Hope it helps...
KosuruS

How to view when a table was last used!!?

Hi,
Pls let me know where I can view when a table in the database was last utilitized i.e. any selection or manipulation was performed on it.
Thanks in Advance,
Abhi

Hi,
you can see if some structure changes were done (DDL statements) through user/all/dba_objects view
select * from user_objects where object_name = 'A1';
... LAST_DDL_TIME
11/14/05 07:59:10 ...
alter table a1 add (c2 int);
...LAST_DDL_TIME
11/14/05 07:59:38 ...
Also you can monitor access to tables (with some degree of errors) using V$ACCESS and the monitoring can be set up through v$segment_statistics.
Andrey

How to view the ARP table

Hi,
I keep going round and round the menus trying to view the ARP table, but cannot find which menu it's in.
Where do I find it?
I think it is a home hub (Black awkward upright thing with 3 blue LEDs on the front).
Thanks.
Leafie.

Thanks for your answer, but I can see the DHCP table fine.
I wanted to do it as the ARP and DHCP addresses were different and I couldn't remember which IP it was on.
Don't need to do it now. Still can't see where to find it though. Might be time to get a decent Modem/router.

How to view lines in table control after pressing vertical scroll bar

Hi Experts,
I created table control in MPP, While design my layout I design table control with 12 lines(Fixed), But I am moving my internal table values to table control. my internal table have more then 12 lines. My problem is I cant view my 13, 14th line in table control. Could you help me in solve this issue?

Please make sure that you have used the following code in the PBO
DESCRIBE TABLE it_tab LINES tab_ctrl-lines.

How to view an appending table from a sub_vi?

I have an array of results that appends to a table every minute. This loops round 17 times then stops. On the subvi front panel, i can view these results being appended into the table row by row every minute. My problem is when i go up a level and place an indicator/table on the subvi`s table o/p, the table does not append every minute any more. It only completes the table when the sub_vi executes.
Does anyone know of a way round this. I have attached an example of my code inside the sub_vi.
Thanks
Grant
Attachments:
TEST.vi ‏25 KB

I could not open your VI because I only have 7.0. Just to let you know globals are ok in moderation and in some instances, I have been programming in labview for a couple of years and only had to use them once or twice. there are a couple of different ways to accomplish want you want to do. the easiest way to do this without using globals and taking up to much memory is to pass references to the subvi. What you will want to do is in the main vi right click on the table and select create reference. then in you subvi create a control reference on the front panel and reference it to a table control, then on the block diagram create a property node and set it to value, then take the same data you are writing to the table in your subvi and pass it to your property node you just created. Here is an example written in 7.0
CC Beat me to posting well thats what happens when you have the reply window open and have to go do something and come back to itMessage Edited by jhoskins on 04-19-2005 09:44 AM
Message Edited by jhoskins on 04-19-2005 09:47 AM
Joe.
"NOTHING IS EVER EASY"
Attachments:
Grapf ref.llb ‏57 KB

How to view all user tables in a particular user tablespace

Hi friends,
I want view user tables in a particular tablespace. I dont have dba privilages. Its production environment.
Plz send me a query for the same.
Thanks.

I want view user tables in a particular tablespace. I dont have dba privilages.Do you want to list tables owned by 1 user?
Do you want to see contents of tables owned by 1 user?
Can you log into DB as the user in question?

How to view and control a VI remotely from a web browser

Hello,
I want to see and control a vi using a web browser.
I followed the steps recommended in help and I can see and control the front panel of my vi.
So far everything is OK.
First problem:
A button activates a simple window display a message (One Dialog button). The dialog box opens on the server computer but can not be seen in brouser and therefore can not be closed remotely.
The second problem:
Another button activates another window (vi) loaded dynamically. The VI is reentrant and is open with option 0xC0 ("Enable simultaneous calls on reentrant VIs" and "Prepare to call and forget"). By activating the button, it opens multiple instances of the VI properly and runs on the server computer, but their are not visible to the client computer.
I created, after the same algorithm, corresponding HTML file for the dynamically loaded VI and it is saved in the same place with the main program HTML file.
What to do as the client computer can operate main VI and adjacent windows from the browser?
Thanks,
Cristian
Solved!
Go to Solution.

Another option would be to use something like WebSockets and have your LabVIEW application communicate with a web-page you've designed/developed with Javascript. Then you can use things like floating windows/dialogues with jQuery. It's a lot of work though as you'll need to define your websockets API for talking to your application and then develop the web-page in HTML/CSS/JavaScript for your user interface.
Unfortunately, even browsers are moving away from pop-up windows (chrome and various addons tend to block popups and they don't play nice with mobile devices). You can have semi-dialogue-like pop-ups though with modal dialogues: https://jqueryui.com/dialog/#modal-message Note though that they are contained within the browser window.
My advice would be to think about creating a custom UI in LabVIEW that works with a single pane / panel (you can use tab controls!) and use that with remote front panels. Then decide if you want to invest the time/effort in a WebSockets/Web Services approach with your own browser-based UI. Note as well that remote front panels don't work in Chrome properly any more.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

SG-500-28P How to view mac address table?

The standare Cisco IOS command is show mac-address-table. This command isn't available on this switch.
FW v1.3.0.62
Thanks.

Show mac address-table

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

How can I filter a table from Data Control without enter query

I have a table from a web service data control based on WSDL.
I want to filter the table without input query at filter text box. Without filter text box, each would filter the table with a hardcoded query internally.
For example, when user click A menu button then it filters the table where type = '1' and B menu button filters the table by type='2' and C menu button filters the table by type=' ' .
How can I filter the table without enter query?
Could anyone point me to a solution please.
Thanks.
jdev 11.1.5
Edited by: 893364 on Oct 26, 2011 12:15 PM
Edited by: 893364 on Oct 26, 2011 12:21 PM

Hi,
when you created the table, did you try selecting the "filter" option. Select the table and go to the Property Inspctor. In the tool bar of the Property Inspector there is an icon to change the configuration. Its adding filter filter fields for the user to search in.
Option 2: The data of the Web Service actually is held in the iterators. If you wanted to filter the WebService query, I would not use the WS DC but a JAX-WS proxy in a POJO to fetch the WS Data. Then have the Data Control created from the POJO. You could have a method exposed on the POJO that allows you to filter the internally held data
Frank

How to create a maintainance view for a table.

Hi All,
Can anyone explain me how do we create a maintainance view for a table?
Also, what access is required to create the view.
Is it true that for SAP tables we cannot create a maintainance view?
Appreciate any help on this.

Hi
Can anyone explain me how do we create a maintainance view for a table?

You can use the SE11 menu option 'Utilities-->Table Maintenance Generator' or you can use transaction SE54.
also check
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
Regards
krishna
Note: Award Points if helpful. Thanks

How to view TDMS control table?

Similar Messages

Maybe you are looking for