How to view the Array configuration in 3510 sun server

Hi Gurus
Am trying to build the 3510 server with arrays,,,,i would like to see the current 3510 array configuration,is there anyway to view the configuration from the current prod.server.
Your help will be highly appreciated.
Regards
etc.

I believe this is not a real form but a special built-in form or something.
Because when I open the Tabbed User Form in BPE and try to open the reference to MissingFields I get an error.

Similar Messages

  • How to view the sql query?

    hi,
      how to view the sql query formed from the xml structure in the receiver jdbc?

    You can view SAP Note at
    http://service.sap.com/notes
    But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
    Reason and Prerequisites
    You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
    Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
    Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
    When you want to use a parameter documented here, please be aware to which category it belongs!
    Solution
    The following list shows all available parameters of category 1 or 2. Please note:
    Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
    Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
    The default value of a parameter is always chosen that it does not change the standard functionality
    JDBC Receiver Adapter Parameters
    1. Parameter name: "logSQLStatement"
                  Parameter type: boolean
                  Parameter value: true for any string value, false only for empty string
                  Parameter value default: false (empty String)
                  Available with: SP9
                  Category: 2
                  Description:
                  When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
                  This should be used only during the test phase and not in productive scenarios.
    Regards,
    Prateek

  • How to save the print configuration

    Hello, in my business, employees need to print multiple documents per day.
    But for these specific documents, they need to print with a size of 105%.
    My question is how to save the print configuration because they need to remplace the size by 105% every time ...
    Please help me
    (Sorry for my bad english, i'm french)

    it was here : http://www.hostingpics.net/viewer.php?id=684187301.jpg
    this screen appear after i press File -> print
    and i need to put 105% every time i want to print document, how to save this ?
    edit : this is not in the printer configuration

  • [SOLVED] How to view the *exact* name of the currently running kernel?

    Perhaps this question will seem dumb, but here goes : I have two kernels installed :
    [ruben@arch ~]$ yaourt -Q linux
    core/linux 3.2.9-1 (base)
    [ruben@arch ~]$ yaourt -Q linux-ck-kx
    repo-ck/linux-ck-kx 3.2.11-1 (ck-kx)
    Grub’s menu.lst is configured to boot linux-ck-kx :
    # general configuration:
    timeout 5
    default 2
    color light-blue/black light-cyan/blue
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
    initrd /boot/kernel26.img
    # (1) Arch Linux Fallback
    title Arch Linux Fallback
    root (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
    initrd /boot/kernel26-fallback.img
    # (2) Arch Linux CK-KX
    title Arch Linux CK-KX
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
    initrd /boot/initramfs-linux-ck.img
    # (3) Arch Linux CK-KX Fallback
    title Arch Linux CK-KX Fallback
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
    initrd /boot/initramfs-linux-ck-fallback.img
    And yet, I see no mention of *-ck-kx when issuing this comand :
    [ruben@arch ~]$ uname -a
    Linux arch 3.2.9-1-ARCH #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012 x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
    It does not matter whether I change the default kernel line in /boot/grub/menu.lst : I can set it to “ 0 ” or “ 2 ” and reboot, and the output of “ uname -a ” will always be exactly the same as above ; no mention of *ck-kx even though I know it is running.
    I searched the web on how to view the name of the running kernel, all results I found said to use uname, so is there another command I am missing here ? Or is it normal that both my kernels yield the same uname output ?
    Just curious, because I was playing around with kexec, and when doing “ fake ” reboots, I was alternating between the normal ARCH-kernel and the ck-kx*kernel, and I wanted to be sure that it actually worked, so I checked everytime with uname, and since I saw no difference in the outputs, I assumed kexec wasn’t working like it should, so I did a “ real ” reboot, but same uname outputs… So I must be missing something…
    Here are the kexec commands I used, just to be sure I am doing this properly :
    [ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux-ck.img /boot/vmlinuz-linux-ck
    [ruben@arch ~]$ sudo init 6
    and :
    [ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux.img /boot/vmlinuz-linux
    [ruben@arch ~]$ sudo init 6
    Thoughts ?
    Last edited by Montague (2012-03-15 22:00:02)

    litemotiv wrote:
    Hmm worksforme:
    $ uname -r
    3.2.11-1-ck
    One question for you litemotiv : do you have two kernels currently installed on your system, like I do, or did you uninstall the ARCH-kernel ? I ask because I might try this :
    $ sudo pacman -Rns linux
    and reboot, and see what happens…
    But before I do that, might as well try to debug it ;
    t1nk3r3r wrote:I would point the finger at GRUB, or something occuring near boot-time.
    https://wiki.archlinux.org/index.php/Boot_Debugging
    So I tried the “ Heavy Debug ” option, rebooted, then issued “ dmesg > dmesg.txt ” ; here are the first few lines of that file :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012
    [ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
    and the complete dmesg output is here. I am no expert at reading debuggin output, but from the above, it seems like the default ARCH-kernel is being booted, even though my menu.lst hasn’t changed from my previous post (exept for the debugging options) :
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # (0) Arch Linux CK-KX
    title Arch Linux CK-KX
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro rootdelay=5 panic=10 debug ignore_loglevel
    initrd /boot/initramfs-linux-ck.img
    # (1) Arch Linux CK-KX Fallback
    title Arch Linux CK-KX Fallback
    root (hd0,0)
    kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
    initrd /boot/initramfs-linux-ck-fallback.img
    I want the ck-kernel to boot, what it going on here ? Any more thoughts ?

  • How to View the Loaded Data

    Hi,
    I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
    Thanks

    Hi Madhu,
    You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
    Regards
    Hemant

  • How to view the Users in the Portal Activity Report

    Hello,
    Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
    Please explain me in detail how to view the Report.
    Thnx in Advance
    cheers,
    Murali

    hi,
    You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
    Do see the documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
    Weblog :Portal SP9: Portal Activity Report
    Regards,
    Ganesh N

  • How to View the Scheduler in ODI Console

    Hi
    In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
    My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
    In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
    Regards
    Claude

    To display the schedule for one agent:
    In Topology Navigator expand the Agents node in the Physical Architecture accordion.
    Select the Physical Agent you want to update the schedule.
    Right-click and select View Schedule.
    The Schedule Editor appears, displaying the schedule for this agent.
    Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
    HTH -
    Jasmine

  • HOw to view the records in a structure qaqee ?

    hi every one ,
    we can view the tble through SE16 
    HOw to view the records in a structure qaqee ?
    Thanks in advance

    Hello,
    Please check the link
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
    You can view the struture in SE11 t-code for its components.
    Regards,
    Shailesh

  • How to view the source code for Native Method

    hi
    i am using some native methods in to my code ;
    can anybody tell me how to view the source code for the same ;
    nik

    Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

  • How to view the purchase order output

    Hi all,
    how to view the purchase order output in the transaction me23n?
    How to obtain the purchase order output form?
    Please help..

    HI,
    goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
    then in ME23n click on messages there create ur message type NEU and save it
    then print the purchase order...
    hope u get solved with this
    Regards
    Syed A

  • How to view the table at the application level

    Dear All,
    How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
    code/
    create table zmard as select * from sapone.mard where 1 = 2
    /code
    I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
    can anyone guess the solution.
    Best wishes
    Mahesh

    Hi
    U should create a program using SQL native in order to select and show the data.
    By SE11 or directly in the program u can define a structure like your table:
    DATA: BEGIN OF W_ZMARD,
                  FIELD,
              END     OF W_ZMARD.
    EXEC.
       OPEN CURSO FOR SELECT * FROM ZMARD
    ENDEXEC.
    DO.
      EXEC.
         FETCH NEXT CURSOR INTO :W_ZMARD
      ENDEXEC.
      IF SY-SUBRC <> 0.
         EXIT.
      ENDIF.
      WRITE: / W_ZMARD-FIELD,
    ENDDO.
    EXEC.
      CLOSE CURSOR
    ENDEXEC.
    I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
    Max

  • How to view the Invoice

    Hi
    Can anyone explain me like how to view the Customer and vendor invoices through T.Code or through path.
    Thanks & Regards

    hi,
    you can view the customer & vendor invoice by giving the FI document number in FB03. Then you can Go for Environment - Document Environment - Original Document. This will take you to the Customer invoice which was raised in the SD module. or vendor invoice which was raised in the MM module.
    you can follow the same process from the FI report : FK10N for vendors & FD10N for Customers.
    hope its useful.
    regards,
    R.Ramakrishnaraj

  • How to view the physical size of objects

    Hi
    Please advise how to view the physical size of objects like tables, indexes, materialize views etc.
    Wishes
    Jawad

    To see the physical size of objects like tables, indexes, use
    USER_SEGMENTS where SEGMENT_TYPE=table/index/partition etc.
    But for views/packages/java/trigger, you can only see rough estimate in USER_OBJECT_SIZE

  • How to call the Application configuration in run time.

    hi guru,
    i have created two  Application configuraton   and it working fine.
    my question how to call the application configuration in run time.
    Example :
    Based on the user i want to change the Application Configuration.like Super user and Normal user.
    Advance thank's
    Regard's
    Vivekanathan.S

    Hi,
    Please try out this way-
    Have a look at this table -
    WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
    after you are done with the configuration--
    Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
    Please refer to these links -
    different default layouts for different CONFIG_IDs
    Get WDCONFIGURATIONID
    Regards
    Lekha

  • Hi i am using oracle 10g how to view the content of the stored procedure or trigger ?

    Hi i am using oracle 10g .How to edit  the content of the stored procedure or trigger ?

    jklopkjl wrote:
    Hi i am using oracle 10g .How to view the content of the stored procedure or trigger ?
    query ALL_SOURCE
    SQL> desc all_source
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    NAME                                               VARCHAR2(30)
    TYPE                                               VARCHAR2(12)
    LINE                                               NUMBER
    TEXT                                               VARCHAR2(4000)

Maybe you are looking for