How to view the cost of all articles at all sites in SAP using a report?

So, here is the ask:
I want to view the cost (could be either Std Cost or Moving Avg Price, based on price control) for all articles (materials) in all the sites (plants) in SAP. This can be a very huge number for retail clients, resulting in millions of records.
I know that MBEW stores this information for an article site level (when site is maintained as val. area), but we need a report to handle huge volumes. Is there a standard report out there, which may leverage info structures to give this information.
Please help!

Hi
For standard LIS, see Note 491519 - Standard analyses - Transaction codes and reports.
I don't know any standard report for your requirement. Actually, I created some reports using MBEW and MBEWH tables. For understanding how MBEWH behaves, please, see SAP Note 193554 - Stock/valuation data of previous periods.
I hope this helps you
Regards
Eduardo

Similar Messages

How to do the cost assignement mandatory in infotype 0014

Hi everybody,
does any of you know how to do the cost assignment mandatory in infotype 0014?
We have use the feature COBLT and table T588N for Function Module RP_TIME_COBL_002, and now the field COBL-AUFNR is mandatory, but we need the cost assignment to be mandatory, I mean should be impossible to save a new record without cost assignement. Is is possible using standard functionality or I have to use the user exit in PAI?
Thanks in advance.
Cristóbal.

Hi,
Instead of user exit, do as below.
Go to Table using SM30->V_T588M. Give module pool name as MP001400.
Now check your correct variable key for the feature & click on the corresponding Alternative Screen for e.g. 2010 & now go that field & mark that field as required field by choosing the second radio button.
Hope this will solve your problem.
Thanks,
Sarika.

I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?

I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?

If you go to the Photos app, is there content in the Photo Library? These would be pictures that are synced to the phone from the computer. Photos in the camera roll are those that you take with the phone, or save from email, MMS on the phone. What type of pictures are you trying to get rid of? If you are trying to get rid of the synced photos, you need to connect to iTunes, select the iPhone in the device pane, then go to the Photo tab in iTunes and remove the check mark by sync.

How to extend the costing view for a material

How to extend the costing view for a material

Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

How to view the table at the application level

Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
Mahesh

Hi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
              FIELD,
          END     OF W_ZMARD.
EXEC.
   OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
     FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
     EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max

How to block the cost center

Dear Guru's
Can any tell me how to block the cost center, can we detele which is having values. can we delete which is not having values
Regards
Chandra Sekhar Reddy.P

Hi,
Once you post actual values or any planning exists on this cost center you cant delete.
To ristrict posting to cost you have two options.
1.You can change validity period.
change end from 12/31/9999 to what ever date you want to stop posting(e.g. as of today 10/23/08)
2. lock all postings to cost center on Control data tab in KS02.
Thanks,
Rau

How to view the tables/views available in Oracle

HI,
I am creating DB connection and importing the data from Oracle TABLES/ Views. I just want know how to view the tables/views available in Oracle. (I have the login details). Can I view thru TOAD? Pl let me know the best way and suggestions/ views / Links/ whitepagers.
Regards,

Hi,
I don't remember exacly: RSA1 -> source system -> "replicate datasources". Works this also in a DB-source system. I think so.
=> you get all tables that your user has authorisation.
This function execute for example (in oracle there are same information tables: dba_tables, user_tables ...) following select in the database:
select TABLE_NAME from DBA_TABLES;
Sven

How to view the certificate that a component has been signed with?

Hi all,
Been using java webstart deployment for a while so understand how to sign and deploy java applications.
Question I have is how to view the certificate that was used to Sign a jar. For example, if I signed a jar "myComponent.jar" how can I then view the certificate details within this jar. I currently have an old component which I signed with an old certificate and want to view the experation details.
Thanks in advance
Simon
Edited by: simon_seagroatt on Sep 22, 2009 4:20 AM

You can use command (it will show CN, OU, O, L, etc... and expiration date, of course):
jarsigner -certs -verify -verbose pathToYourJar.jarI'd suggest redirecting output (>>out.txt).
Bye.

How to view the java code of the message mapping,

Hi Experts,
<b>how to view the java code of the message mapping,</b>
how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi sowmya,
Open any Message mapping in IR. Press <b>CtrlShift0(zero)</b> to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to view the cost of all articles at all sites in SAP using a report?

Similar Messages

Maybe you are looking for