How to view the Design layout for Status tracking in bw 3.5?

Hi all,
I am new to bps 3.5 ? and i have a status and tracking in the development created by some one. i am able to execute it, but then i would like to see the desing layout of it.
How the layout is design.
Can anyone help me on this!!
Thanks
Pooja

To my way of thinking, you do not so much design the STS layout as to customiise or configure the STS. This is done with transaction code BPS_TC. Certainily some admin user will need access in order to adjust the configuration from time to time, to set new dates, people, organisation changes and so on. Different authorizations are required for 'standard' users, 'super' users (with an overview of the whole process. and 'admin' who can configure the STS. But BPS_TC does not allow you to see or to change the layout of STS. (The program can be found from SE80 in BSP Application TUNGUSKA.)
Help is at:
http://help.sap.com/saphelp_nw04/helpdata/EN/ff/3deba47cf511d5b3e30050dadfb23f/frameset.htm
I think you would need a very compelling reason to change the basic design.
Stephen

Similar Messages

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to view the design part of th source code

hi
i have a source code in NetBeans IDE.i have to view the design part of that source code.because i shared that design part through local address which is designed in another system .Ater sharing i got tha coding part of that design part.But i need designing part of that coding part.i searched that, but i couldnt get it.
please helpme

Sorry for this not being helpful, but if there ever was a stronger argument for not using NetBeans generated code, for learning to code Swing from the ground up, I'd like to see it.
To the OP, this is not so much a Swing question as a NetBeans question. I recommend that you find a NetBeans forum or mail list, rephrase your question for clarity, and repost it there. Good luck.

How to view the source code for a Native Method

hi
i am using a Native method Math.pow() ;
but since it is a native method it is taking more time to execute ;
since this method i had to call at least 700 times it is affecting the performance of the application ;
so i am thinking to write the user defined method based on the logic which has been implemented in the pow() method ;
for that i need to know in which .c file this method has been written ;
or else it can not be viewed at all ( if it is in the .dll)
can u help me out
nik

Hi!
Here is part of StrictMath.java code.
* The class <code>StrictMath</code> contains methods for performing basic
* numeric operations such as the elementary exponential, logarithm,
* square root, and trigonometric functions.
* <p>
* To help ensure portability of Java programs, the definitions of
* many of the numeric functions in this package require that they
* produce the same results as certain published algorithms. These
* algorithms are available from the well-known network library
* <code>netlib</code> as the package "Freely Distributable
* Math Library" (<code>fdlibm</code>). These algorithms, which
* are written in the C programming language, are then to be
* understood as executed with all floating-point operations
* following the rules of Java floating-point arithmetic.
* <p>
* The network library may be found on the World Wide Web at:
* <blockquote><pre>
* http://metalab.unc.edu/
* </pre></blockquote>
* <p>
* The Java math library is defined with respect to the version of
* <code>fdlibm</code> dated January 4, 1995. Where
* <code>fdlibm</code> provides more than one definition for a
* function (such as <code>acos</code>), use the "IEEE 754 core
* function" version (residing in a file whose name begins with
* the letter <code>e</code>).
* @author unascribed
* @version 1.9, 02/02/00
* @since 1.3

How to view the code/logic for the built-in oracle functions

Hi,
How can we view the logic behind the oracle supplied built-in functions like LAST_DAY , MONTHS_BETWEEN etc.,
I tried to view the same using the sys.STANDARD package , the observations are given below
function LAST_DAY(RIGHT DATE) return DATE;
pragma BUILTIN('LAST_DAY',38, 12, 12); -- PEMS_DATE, DATE_LAST_DAY
pragma FIPSFLAG('LAST_DAY', 1450);
Regards
Lok

How can we view the logic behind the oracle supplied built-in functions like LAST_DAY , MONTHS_BETWEEN etc., You cannot. These built-ins, are 'built-in'.... As far as I know they are implemented in Oracle's kernel, as C code.

How to view the pl/sql for dbms_stats

Hi,
Please can you help?
From executing the code execute dbms_stats.gather_database_stats; , I have the following error:
BEGIN dbms_stats.gather_database_stats; END;
ERROR at line 1:
ORA-01476: divisor is equal to zero
ORA-06512: at "SYS.DBMS_STATS", line 13336
ORA-06512: at "SYS.DBMS_STATS", line 13682
ORA-06512: at "SYS.DBMS_STATS", line 13826
ORA-06512: at "SYS.DBMS_STATS", line 13790
ORA-06512: at line 1
I wanted to see the pl/sql code for the package body to see where the +'divisor is equal to zero'+ could be coming from.
I'm logged in to the database as SYS and ran the following query :
select text from all_source
where name = 'DBMS_STATS'
and type = 'PACKAGE_BODY';
what I get is unreadable.
Database version is 10.2.0.3
thank you.

Hello,
You may consult the following Notes from My Oracle Support:
Getting ORA-01476 during execution of DBMS_STATS.GATHER_SCHEMA_STATS (Doc ID 464440.1) Or, as you are in 10.2.0.3, you may also apply the Patch Set *10.2.0.4* as it seems to be a Bug.
Hope this help.
Best regards,
Jean-Valentin

Reverse the scroll direction for my track pad

i just updated to mavericks and i can't figure out how to reverse the scroll direction for my track pad

? Are you saying that the option isn't there? Mine is in the "Mouse" section.
See this:

Is there a way to view the notebook layout view on Word for mac on an iPad?

Is there a way to view the notebook layout view on Word for mac on an iPad?

No. Create a playlist that you then sync to your iPod, and choose whatever view you wish of the playlist within iTunes.

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to view the input and output layouts created in the planning folder?

Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
Pooja

Hi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps

HOW TO VIEW THE ENABLED AUTO EXTENDS FOR THE DBF

HI,
CAN YOU TELLME WHICH VIEW HELPS TO VIEW THE ENABLED AUTOEXTENDS FOR DBF.
Thanks in advance
cgprasad

Hi,
PROD.SQL>DESC DBA_DATA_FILES
Name                                                  Null?    Type
FILE_NAME                                                      VARCHAR2(513)
FILE_ID                                                        NUMBER
TABLESPACE_NAME                                                VARCHAR2(30)
BYTES                                                          NUMBER
BLOCKS                                                         NUMBER
STATUS                                                         VARCHAR2(9)
RELATIVE_FNO                                                   NUMBER
AUTOEXTENSIBLE VARCHAR2(3)
MAXBYTES                                                       NUMBER
MAXBLOCKS                                                      NUMBER
INCREMENT_BY                                                   NUMBER
USER_BYTES                                                     NUMBER
USER_BLOCKS                                                    NUMBER                  Regards,
Yoann.

How to Modify the standard layout set for Sales Order

Hi all,
Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
Thanks in advance
Santosh R

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00     Price     130.00000      TEST     100
     Gross Value     20.12      USD     100 <-how to
     Discount Amount     0.00      USD     100
     Rebate Basis     20.12      USD     100
     Net Value for Item     20.12      USD     100
     Net Value 2     20.12      USD     100
     Net Value 3     20.12      USD     100
VPRS     Cost     27.22      HKD
     Profit Margin     16.61      USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

View Crystal Report Layout for my UDO Form

Hi all,
I try to view a report created for my UDO form. I set all settings in Administration -> Setup -> General -> Report and Layout Manager. Now I wonder what should be assigned to eventInfo.LayoutKey. I tried assigned report's DocCode from RDOC, DocEntry of my UDO object or UDO Code but nothing works. Always get an error: Incorrect format of argument or something like that - I didn't get an error in English so I tried to translate it.
How to show a report layout for my UDO form?
Regards
Szymon Lipnicki

Hi and thanks for Your reply.
Help file contains example how to open report layout prepare in Crystla Reports designer for UDO form.
//Add Layout Key Event Handler
SBO_Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SBO_Application_LayoutKeyEvent);
void SBO_Application_LayoutKeyEvent(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
    BubbleEvent = true;
    if (eventInfo.ReportTemplate == "A001" && eventInfo.ReportCode == "A001001")
        eventInfo.LayoutKey = 1; //Set the key of the layout
I am using SAP 8.81.
Regards
Szymon

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How to change the default Layout Of the Error Page (to hide Home link)?

How to change the default Layout Of the Error Page (to hide Home link)?
If a user want to view some page that he/she don't have access to view it, a error page with this message will be displayed.
"You do not have permission to perform this operation. (WWC-44131)"
The error page, have in the Upper right page, Home link and Help link.
My question is, How to Hide HOME link and HELP link in the Page?
I try to find the template of the page, but failed to do that.
Can anybody help?..it urgent.
Thanks.

Modifying the error page is not supported in the current release of Portal (9.0.2). You will be able to do this in the upcoming 9.0.2.6 release, planned for the end of May.
Regards,
Jerry
PortalPM

How to view the Design layout for Status tracking in bw 3.5?

Similar Messages

Maybe you are looking for