How to view the doc's in WebPage Format

Hi Folks
i have uploaded couple of documents with different extension , such as
1. documentText.txt
2. documentWord.doc
3. documentexcel.xls
My requirement is ,
at the time of viewing the document from KM , it should be viewed in WebPage Format.....(sth Like WordPad) format.
Kindly let me know the Configuration that need to be done to achive this requirement.
Thanks

Hi Mahesh
Thanks for the info
but i still some more clarity, with below configuration step i will be reaching at a point , where i will be creating new MIME Types
1.Need info at this point
In the creation of new MIME types its asking for
following things, which i am not clear
Extension
Locale
MIME_TYPE
Resource Bundle File
Resource Key
Imp: Once on providing all the above details , this newly created MIME has to be called from the application, if so, from where?
Awaiting for answer
Thanks
T.R.Kumar
Note: Points will be awarded for Sure.

Similar Messages

How to View the Doc Types display along with description

Hi All
In ME21N transaction in Doc type tab, only description is appearing, i want that along with technical names, for example li"NB-Standard Purchase Order", like this, so what settings to be done?
Rgds
Ramesh

Go to ME21N trxn Click Alt+F12 > Options > Expert
Here Put Tick in Controls Tab for the following
Show Keys in All Dropdown Lists
Sort Item by Key
Then you will see the Doc types along with Description

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

Help, How to view the error log of oracle Job

Hi all,
I created a job in my database, which clears the archivelog. After the job is executed, it occurs error.Such as :
RMAN清理归档日志 1 问题 2010-3-19 下午03时11分00秒 GMT+08:00 PTDB 数据库实例 SYSTEM RMAN 脚本
How to view the error log of oracle Job?
Thank you.
Eric Zhou

Hello,
Besides some views (with the scheduler) that you can get on the link below:
http://download-west.oracle.com/docs/cd/B28359_01/server.111/b28310/scheduse002.htm#CHDGIDFD
You may use the LOG parameter with RMAN so as to generate a logfile on the server.
Also from EM DBConsole (starting with 10g) you may have the RMAN Backup Report.
Hope this help.
Best regards,
Jean-Valentin

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

How to view the table at the application level

Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
Mahesh

Hi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
              FIELD,
          END     OF W_ZMARD.
EXEC.
   OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
     FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
     EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max

How to view the Invoice

Hi
Can anyone explain me like how to view the Customer and vendor invoices through T.Code or through path.
Thanks & Regards

hi,
you can view the customer & vendor invoice by giving the FI document number in FB03. Then you can Go for Environment - Document Environment - Original Document. This will take you to the Customer invoice which was raised in the SD module. or vendor invoice which was raised in the MM module.
you can follow the same process from the FI report : FK10N for vendors & FD10N for Customers.
hope its useful.
regards,
R.Ramakrishnaraj

How to view the physical size of objects

Hi
Please advise how to view the physical size of objects like tables, indexes, materialize views etc.
Wishes
Jawad

To see the physical size of objects like tables, indexes, use
USER_SEGMENTS where SEGMENT_TYPE=table/index/partition etc.
But for views/packages/java/trigger, you can only see rough estimate in USER_OBJECT_SIZE

Hi i am using oracle 10g how to view the content of the stored procedure or trigger ?

Hi i am using oracle 10g .How to edit the content of the stored procedure or trigger ?

jklopkjl wrote:
Hi i am using oracle 10g .How to view the content of the stored procedure or trigger ?
query ALL_SOURCE
SQL> desc all_source
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
NAME                                               VARCHAR2(30)
TYPE                                               VARCHAR2(12)
LINE                                               NUMBER
TEXT                                               VARCHAR2(4000)

How to view the tables/views available in Oracle

HI,
I am creating DB connection and importing the data from Oracle TABLES/ Views. I just want know how to view the tables/views available in Oracle. (I have the login details). Can I view thru TOAD? Pl let me know the best way and suggestions/ views / Links/ whitepagers.
Regards,

Hi,
I don't remember exacly: RSA1 -> source system -> "replicate datasources". Works this also in a DB-source system. I think so.
=> you get all tables that your user has authorisation.
This function execute for example (in oracle there are same information tables: dba_tables, user_tables ...) following select in the database:
select TABLE_NAME from DBA_TABLES;
Sven

How to view the doc's in WebPage Format

Similar Messages

Maybe you are looking for