How to View the Doc Types display along with description
Hi All
In ME21N transaction in Doc type tab, only description is appearing, i want that along with technical names, for example li"NB-Standard Purchase Order", like this, so what settings to be done?
Rgds
Ramesh
Go to ME21N trxn Click Alt+F12 > Options > Expert
Here Put Tick in Controls Tab for the following
Show Keys in All Dropdown Lists
Sort Item by Key
Then you will see the Doc types along with Description
Similar Messages
-
Is there a way to view the messages I sent along with files in Adobe Send?
Is there a way to view the messages I sent along with files in Adobe Send?
Too bad...I wish that feature was still there that was in SendNow...I also have to go and get the recipients email each time I send a file instead of Send remembering the email addresses I have sent to in the past.
Are any of the great features of SendNow going to be brought over into Send? Or are they just gone...I am a paying CC user...just curious what's going on at Adobe...Thanks for your very quick response though...I guess my message content is gone. -
Is there any report to view" the blocked Vendor Invoices along with the Pay
Dear Gurus,
Is there any report to view" the blocked Vendor Invoices along with the Payment Date". Please Let me know.
BalajiI think you can solve this issue with a Query.
Fernando. -
How to view the doc's in WebPage Format
Hi Folks
i have uploaded couple of documents with different extension , such as
1. documentText.txt
2. documentWord.doc
3. documentexcel.xls
My requirement is ,
at the time of viewing the document from KM , it should be viewed in WebPage Format.....(sth Like WordPad) format.
Kindly let me know the Configuration that need to be done to achive this requirement.
ThanksHi Mahesh
Thanks for the info
but i still some more clarity, with below configuration step i will be reaching at a point , where i will be creating new MIME Types
1.Need info at this point
In the creation of new MIME types its asking for
following things, which i am not clear
Extension
Locale
MIME_TYPE
Resource Bundle File
Resource Key
Imp: Once on providing all the above details , this newly created MIME has to be called from the application, if so, from where?
Awaiting for answer
Thanks
T.R.Kumar
Note: Points will be awarded for Sure. -
Can I get the date to display along with the day and time
can I get the date displayed with the day of week and time?
Hi Mary, you can, but what version of OSX are you running on what Mac?
See if this helps for starters...
http://paulstamatiou.com/how-to-display-date-in-os-x-menu-bar -
How to sync the timestamp type in 10g with oracle 8i
Hi,
I have oracle 8i on solaris server and we have created application database as well.
I have created oracle 10g databse in some other server and imported the whole database into 10g.
Since there is timestamp format difference in oracle 8i and 10g the application is not working properly in 10g server.
see the below example
In 8i
select to_char(sys.standard.sys_at_time_zone(sys.standard.localtimestamp,'0:00')) from dual
22-MAY-09 09.59.50 AM +00:00
In 10g
select to_char(sys.standard.sys_at_time_zone(sys.standard.localtimestamp,'0:00')) from dual
22-MAY-09 09.53.54.638090000 AM +00:00
since in 10g it is giving microseconds as well in the output unlike 8i, our application is not working properly.
Please advice
RBDoes setting NLS_TIMESTAMP_TZ_FORMAT at session level (using logon trigger) solve your problem?
BTW, this does not qualify as an installation issue so please post such queries in Database-General forum. -
How to View the Scheduler in ODI Console
Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
ClaudeTo display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine -
How to view the sql query?
hi,
how to view the sql query formed from the xml structure in the receiver jdbc?You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
Parameter type: boolean
Parameter value: true for any string value, false only for empty string
Parameter value default: false (empty String)
Available with: SP9
Category: 2
Description:
When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek -
How to view the Users in the Portal Activity Report
Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Muralihi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N -
How to change the document type while creating a PO by ME59N
Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu -
How to change the billing type Rv to DG
Dear all,
when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
once we save that the in customer G/L we are getting the document type as RV instead of DG.
please tell me how to change the document Type in customer Ledger.
regards,
chethanHi,
Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
Thanks,
Nirav -
[CS3][JS] How to get the file type of current document
Hi,
How to get the file type of current opening document (e.g., tif, jpeg, png) using JavaScript with Photoshop CS3.
I am using file object the open the files one by one in the folder (the files sometimes don't have the extensions).
If the current document is in tiff format then I need to convert to 8-bit, if its an Jpg image then needs to ignore the file.
Regards,
KarthikDo you really need to know the file type? What about just checking the bit depth?
var doc = activeDocument;
if (doc.bitsPerChannel != BitsPerChannelType.EIGHT) {//Not 8 bit
doc.bitsPerChannel = BitsPerChannelType.EIGHT;
//do your save etc
}else{
//Ignore -
How to create the sub type field in hr abap infotype
hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan -
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A -
How to get the material list displayed in CU50 transaction into ABAP report
How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
But I want only the material list displayed in CU50.Hi,
Could you please tell us how you found a solution to your problem?
Thanks & regards
Hassan
Maybe you are looking for
-
Uneven to say the least, Gpu No1 rises in temperature only slightly, perhaps 10c when under load from at rest of about 38c but Gpu No2 rises to 90c+ very rapidly and would I'm sure top 100c after a few minutes. Screen grab of the NVidea Monitor.
-
Bex Ajust Query Warning message
Hi, When I run by bex report in browser I get the message "Characteristic XXX was changed in infocube ABC.Adjust the query" I retransported the query but no change. How do I adjust the query?
-
I provide my customers an ethernet port off my PE (ie: FastEthernet0/0 on PE from configuration below). They can connect whatever they want into the port. Most times it's simply a PC. The only thing they expect to get off that port is Internet acc
-
Elements 12 and Adobe Camera Raw
If I load a Canon CR2 file into the 'editor' the image is opened in Adobe Camera Raw 8 - that is fine. If I then make a change to the exposure slider, or any other, and click 'done' ACR shuts down. Not very good, anyone know what is going on? Regards
-
JDev 10g and Variable Highlighter
In the production version of JDev 10g, Variable Highlighter extension(http://home.t-online.de/home/simeon.zverinski/variablehighlighter/index.html), which is so much useful, does not work properly. Quick navigation between variable occurrences functi