How to view the entire CLOB in results table?
According to the release notes with 1.2.1.32, a recent bug fix changed the way CLOBs are displayed in SQL Developer:
Bug 6254736: Clob datatype in table grid fetches the whole clob
Before the fix, for any given CLOB field, the entire CLOB data would be displayed. After the fix, only "(CLOB)" and a few characters are displayed. The entire data is only accessible via the Edit Value dialog.
I understand this change will likely improve performance for very large CLOBs. However, there are times when I want to be able to view the entire CLOB in the table grid (either in the data tab or as the result of a SQL query). Is there any way to restore the old functionality? If not, is there any plan to add a new preference to support the old functionality? Thanks for your help!
The same issue was pointed a while back here : Re: RAW displayed in columns
We would have a solution for it, most likely as a preference.
-Raghu
Similar Messages
-
How to view the emma coverage test result when running local job
Hi Guys,
When using emma in DTE, we can obtain the code coverage test result. I submit a farm job, and can get a txt or html file on coverage report. But when I run it locally, the txt / html files is unavailable. I can only see a folder named coverage with coverage.emma & metadata.emma. So my question is how can I get the coverage report from it?
If I can use some command to generate report files, then what is it and how to run it.
ThanksHello Twenz
This forum is mainly (should not be only but it is) used for supporting Oracle Application Testing Suite (OATS) products.
I guess your question is not related to this solution at all. So maybe this is not really the right forum.
Good luck
JB -
How to return the entire row from a table
Hi guys,
Tabl A
FirstName varchar2(10),
Age Number,
Add varchar2(100),
Table B
Filedname varchar2(200), -- contains all the fields of table A
Datatype varchar2(100), -- Contains the datatypes of the filedname
Length Number -- contains the length of the fileds
Now how can i return the entire row from table A with the datatype and its length.
Any help would be appreciated ?
Here is the query I wrote but it how to take the datatype and its length..
create or replace procedure disp_table_data
as
type r_cursor is REF CURSOR;
c_A r_cursor;
er A%rowtype;
begin
open c_A for select * from A;
loop
fetch c_A into er;
exit when c_A%notfound;
dbms_output.put_line(er.FirstName||'--'||er.Age);
end loop;
close c_A;
END;
/Guys,
I want column value from table A and its corresponding data_type and length from table B. I think I cant do it through joins.
Any idea would be appreciated ?.
Example ..
Tabl A
FirstName varchar2(10),
Age Number,
Add varchar2(100)
insert into A values('John',24,'Boston');
Table B
Filedname varchar2(200), -- contains all the fields of table A
Datatype varchar2(100), -- Contains the datatypes of the filedname
Length Number -- contains the length of the fileds
insert into B values('FirstName','varchar2',10); -- this is coming from table A.
Output should be like this...
John,Varchar2,10
Here (John is the FirstName - coming from table A, Varchar2 is a Datatype and 10 is the Length which are coming from table B ). Only column values are coming from table A , corresponding datatype and length are coming from B.
Any idea would be appreciated ?
Thanks. -
How to view the sapscript result without directing to Printer
Hi All,
I am new to ABAP. can any one tell me how to view the sapscript output without redirecting to the printer from an abap program.
Help would be appriciated.
Thanks,
himaThere are several ways you can view the output of the SAPscript, without redirecting it to the printer.
1. You can directly view the output using Menu --> Utilities --> Printing Test --> give the default printer as LP01 and click Print Preview button, that should give you the print preview of the SAP Script.
2. You can execute the the driver program, if it is a custom program (Z program) then execute the program, it will give you an option of selecting printer,, give the printer as LP01 and select print preview.
lets say you are trying to view the purchase order "Zmedruck", the driver program for the same can be found using the transaction code NACE. or else you can execute the transaction code ME23N, There you will find a button called "Print Preview" Click that to preview your SAP Script. Menu --> GoTo --> Print Preview.
Similarly you will find options to view your sap script in almost all the standard transactions where you are using your SAP Script.
If you need further information,, give me a mail at [email protected]
if found useful, don't forget to reward points.
Thanks-
Shrikant -
How can we pass the entire rows of a table to a web service in a VC model ?
Hi,
On the click of the submit button, I have to pass the rows of two tables into an enterprise service. This service also takes other fields of a form as an input.
How can we pass the entire rows of a table into a service ?
Regards,
NitinHi Nitin,
It seems that you have two or three different structures to pass data using your webservice. In your main question, two tables, you can join both in one table and from there call the webservice. In order to pass the entire table you need:
1. Draw a line between your joinned table and your service,
2. Map the fields,
3. Create a 'SUBMIT' in your table tool bar. Right click on your table and choose 'Create Toobar', '+', name and choose 'Submit' as your event.
4. Go to Configure Element (Table View) 'Multiple' at Selection Mode.
Reward points if helps you to solve your question.
Regards,
Gilson Teixeira -
How to view the DDL script prior to object deployment in OWB 10g R2?
How to view the DDL script prior to object deployment in OWB 10g R2?
Here is what I' looking for: in 10gR2, let's say I've built dimension X, but it's not deployed yet. I've selected one of the deployment options, let's say: "Deploy to Catalog only". Now, I'd like to see a DDL script that will be executed at the deployment time. Where can I find this script? What screen? What menu?
Thanks,
vrViewing the Scripts
After you have generated scripts for your target objects, you can open the scripts and
view the code. Warehouse Builder generates the following types of scripts:
■ DDL scripts: Creates or drops database objects.
■ SQL*Loader control files: Extracts and transports data from file sources.
■ ABAP scripts: Extracts and loads data from SAP systems.
To view the generated scripts:
1. From the Generation Results window, select an object in the navigation tree on the
left of the Generation Results dialog.
2. Select the Scripts tab on the right of this dialog.
The Scripts tab contains a list of the generated scripts for the object you selected.
3. Select a specific script and click the View Code button.
Regards,
Marcos -
[SOLVED] How to view the *exact* name of the currently running kernel?
Perhaps this question will seem dumb, but here goes : I have two kernels installed :
[ruben@arch ~]$ yaourt -Q linux
core/linux 3.2.9-1 (base)
[ruben@arch ~]$ yaourt -Q linux-ck-kx
repo-ck/linux-ck-kx 3.2.11-1 (ck-kx)
Grub’s menu.lst is configured to boot linux-ck-kx :
# general configuration:
timeout 5
default 2
color light-blue/black light-cyan/blue
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
initrd /boot/kernel26.img
# (1) Arch Linux Fallback
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
initrd /boot/kernel26-fallback.img
# (2) Arch Linux CK-KX
title Arch Linux CK-KX
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
initrd /boot/initramfs-linux-ck.img
# (3) Arch Linux CK-KX Fallback
title Arch Linux CK-KX Fallback
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
initrd /boot/initramfs-linux-ck-fallback.img
And yet, I see no mention of *-ck-kx when issuing this comand :
[ruben@arch ~]$ uname -a
Linux arch 3.2.9-1-ARCH #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012 x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
It does not matter whether I change the default kernel line in /boot/grub/menu.lst : I can set it to “ 0 ” or “ 2 ” and reboot, and the output of “ uname -a ” will always be exactly the same as above ; no mention of *ck-kx even though I know it is running.
I searched the web on how to view the name of the running kernel, all results I found said to use uname, so is there another command I am missing here ? Or is it normal that both my kernels yield the same uname output ?
Just curious, because I was playing around with kexec, and when doing “ fake ” reboots, I was alternating between the normal ARCH-kernel and the ck-kx*kernel, and I wanted to be sure that it actually worked, so I checked everytime with uname, and since I saw no difference in the outputs, I assumed kexec wasn’t working like it should, so I did a “ real ” reboot, but same uname outputs… So I must be missing something…
Here are the kexec commands I used, just to be sure I am doing this properly :
[ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux-ck.img /boot/vmlinuz-linux-ck
[ruben@arch ~]$ sudo init 6
and :
[ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux.img /boot/vmlinuz-linux
[ruben@arch ~]$ sudo init 6
Thoughts ?
Last edited by Montague (2012-03-15 22:00:02)litemotiv wrote:
Hmm worksforme:
$ uname -r
3.2.11-1-ck
One question for you litemotiv : do you have two kernels currently installed on your system, like I do, or did you uninstall the ARCH-kernel ? I ask because I might try this :
$ sudo pacman -Rns linux
and reboot, and see what happens…
But before I do that, might as well try to debug it ;
t1nk3r3r wrote:I would point the finger at GRUB, or something occuring near boot-time.
https://wiki.archlinux.org/index.php/Boot_Debugging
So I tried the “ Heavy Debug ” option, rebooted, then issued “ dmesg > dmesg.txt ” ; here are the first few lines of that file :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012
[ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
and the complete dmesg output is here. I am no expert at reading debuggin output, but from the above, it seems like the default ARCH-kernel is being booted, even though my menu.lst hasn’t changed from my previous post (exept for the debugging options) :
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# (0) Arch Linux CK-KX
title Arch Linux CK-KX
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro rootdelay=5 panic=10 debug ignore_loglevel
initrd /boot/initramfs-linux-ck.img
# (1) Arch Linux CK-KX Fallback
title Arch Linux CK-KX Fallback
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
initrd /boot/initramfs-linux-ck-fallback.img
I want the ck-kernel to boot, what it going on here ? Any more thoughts ? -
Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
ThanksHi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant -
How to view the sql query?
hi,
how to view the sql query formed from the xml structure in the receiver jdbc?You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
Parameter type: boolean
Parameter value: true for any string value, false only for empty string
Parameter value default: false (empty String)
Available with: SP9
Category: 2
Description:
When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek -
How to view the Users in the Portal Activity Report
Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Muralihi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N -
How to View the Scheduler in ODI Console
Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
ClaudeTo display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine -
HOw to view the records in a structure qaqee ?
hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advanceHello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh -
How to view the source code for Native Method
hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nikBuy/acquire a C/C++/assembly code disassembler and run the shared library through it.
-
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A -
How to view the table at the application level
Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
MaheshHi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
FIELD,
END OF W_ZMARD.
EXEC.
OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max
Maybe you are looking for
-
Problem in accessing class file for applet code
I am developing a package in struts frame work. I place all the java files in action folder and jsp files in jsp folder.In one of the jsp I write code to invoke applet .But I am getting error as "class not found exception".Can any one help me? Below
-
Deleted pages in iWeb and on hosting site but still appear in navbar?
I've deleted a couple of pages in a site built in iWeb and also deleted the files and html of those pages where my site is hosted (Earthlink). However, I'm still seeing the names of those pages in the navbar - NOT in iWeb, but when i actually access
-
PLEASE SEE THAT ANY ERROR IN THIS PROGRAM
import java.sql.*; public class DB public static void main(String[] args)throws SQLException{ Class.forname("sun.jdbc.odbc.JdbcOdbcDriver"); String url="jdbc:odbc:bharat"; Connection conn=DriverManager.getConnection(url); Sta
-
How do I stretch content Vertically in a WebCenter Spaces page?
I have a box at the bottom of my page with a document explorer inside. I need to have it stretch as the page stretches vertically. Can anybody help? Thanks
-
Authorization: Can I check-out processes from Solution in Read mode?
Hi NG. I am building a new set of user roles, but seems to get stuck with this one. With T-code: SOLMAN_DIRECTORY I would like to issue read access to users, but still give them the possibility to check-out processes to the maintenance project. So fa