How to view the input and output layouts created in the planning folder?

Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
Pooja

Hi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps

Similar Messages

How can I make Apple Earphones be the Input and Output for Audio

I have some older headphones and they aren't compatible with a Mid 2010 (Intel Core i3) 21.5 Inch iMac
Is there some way to make Apple Earphones be the Input and Output for Audio in the iMac
This is a problem for me personally as when I am talking to someone on Skype the iMac picks up the In-built Microphone audio, and yes the headphones I'm using do work straight from the iMac as audio output
Any help is appreciated

you can connect the headset to something like this
http://www.ebay.com/itm/NEW-MaelineA-3-5mm-Female-to-2-Male-Gold-Plated-Headphon e-Mic-Audio-Y-Splitter-/381100440348
and then connect the mic to the input and the headset to the headset port

How to change the input and output schema in BPEL process

hi',
Please tell me how to change the input and output schema in BPEL process after the process is made.
thanks
Yatan

If your intention is just changing the content you are passing to bpel/returning from bpel
Here is another way
just update your default created xsd files with new elements, update wsdl elements in message definition and chnage bpel code to reflect new elements in activities
Regards,
Praveen

How to get the sine wave sample of the input and output in the same time?

I discovered that the samples were acquired did not in the same time in my vi.Could you tell me how to get the sine wave sample of the input and output in the same time?
Output:9263;
Input:9201
Attachments:
singal requency.vi ‏104 KB

Hello Yun_Zhu,
Your VI looks like you started from an example, and you are on the right track.
To clarify are you trying to synchronize the input and the output waveforms? If you you will need to share a time base and a start trigger. Check out the synchronization examples from LabVIEW
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
HIODAQmxSyncMultiDev.png ‏70 KB

How to set the input and output of a subVI

I am trying to configure a subVI by following Chap. 7 of "LabVIEW fundamentals". But I stuck at "Building the connector pane".
My subvi is quite simple, just for testing purpose. I plan to do a summation and display the result. So I placed one numeric Add icon on the block diagram and a numeric Indicator on the front panel. I built a connector pane with three terminals, two for input and one for output.
But, how could I associate the terminals on connector pane with inputs and outputs of terminals on the block diagram? I wanna build a subVI, whose input are two numbers and display the summation on the subVI.
Forrest Sheng Bao, Ph.D.
Assistant Professor, Dept. of Electrical & Computer Engineering
University of Akron, Akron, OH, USA
https://sites.google.com/site/forrestbao/

Hi Forrest Bao,
use the right mouse key as often as you can in LabVIEW. It´s very helpful. If you right click on a link in the connector pane, then you can select to disconnect selected or all.
Mike
Message Edited by MikeS81 on 08-28-2008 01:33 PM

When you set up tracks what is best to pick for the input and output?

When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

First part of the question I don't understand, so could you elaborate please?
Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

How to control (the input and output) EXE file after I call it using exec?

Hi,
I knew that I can use runtime.exec() to call one EXE file, and this works. But this EXE has two characteristics:
1. After this exe starts, it asks user to input number such as 1 or 2 onto computer screen, then press return. Then the exe will start the calculation.
2. after it starts calculation, it prints 3 columns of numbers onto the screen.
My two questions are:
1. How to use java to input the number such as 1 or 2 automatically? this EXE can not work like this in DOS command line:
C:> file.exe parameter
The parameter is the number such as 1 or 2 that I wanna input.
2. how to redirect the 3 columns of numbers from computer screen to txt file?
My colleague can solve these two questions using Mathematica. So I know that definitely there is at least one solution for it. I just can not do it using Java. This wierd exe file bothered me a lot and I really wish that I can get help from someone in java community.
Thank you!
Tony

When you call Runtime.exec, you get a Process object. (I presume something similar happens when you use ProcessBuilder.) Process has methods with names getOutput, getInput, and getError. These correspond to the standard input, standard output, and standard error streams of the spawned process.
You can read and write to the process on the streams corresponding to input and output that the process writes to the console.
[add]
In fact, you should be grabbing and reading the output/error streams anyway, because of the points raised by the Traps article. Google "Java Runtime exec traps" and you'll probably get a link to this JavaWorld article, which describes common Runtime.exec problems and how to solve them.
Edited by: paulcw on Jun 15, 2010 4:09 PM

Planning Folders with multiple input and output layouts

Hi,
I have a planning folder with one input layout and 4 output layouts. The input layout has a GPS assigned to it which will be executed before layout change. Will this function get executed when I open any of the output layouts(out of 4) not necessarily the immediate output layout (next to the input layout) and will the calculated data be displayed accordingly. Can some one please confirm me on how that works.
Scenario2: I have one input layout and 2 output layouts. The input layout has a GPS assigned which will be executed before layout change and the first output layout has another GPS assigned which is basically a push button. Then how does this work.
Points will be assigned . Help is greatly appreciated.
Thanks,
Vamsi

GPS will not be executed when you open any of the output layouts but will be executed only when you open the input layout. Yes, the calculated data gets stored in planning buffer so it will the displayed in input/output layouts accordingly.
Scenario2: The GPS assigned to input layout will be executed when you open the input layout. GPS which is assigned to output layout in the form of a button will be only executed when user will click on that button. Calculated results will be available in all the layouts as the result remains in planning buffer until user explicitly click the 'SAVE' icon in applpication toolbar.

When exporting, the footage in the Input and output monitor is not showing up.

I use Premiere Pro CS4.
When I export my project and I choose the formats and options, they all work fine and it will export fine, but my footage does not show up in the input or output source montior.
Thanks for your time

See:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=547004 Bug 547004] – Implement <input type="color">
''(please do not comment in bug reports; you can vote instead)''
* https://developer.mozilla.org/en/HTML/element/input

For getting purchase order details what are the inputs and outputs

I need to display purchase order details in EP portal by using integration EP, XI and R/3.
I dont know what are the Inputs and what are the Outputs.
Reward points for helpers.
Cheers,
Preethika

Hi Preethika,
for displaying PO use BAPI : BAPI_PO_GETDETAIL
Its input is PO number
Its output are tables PO_HEADER_TEXTS - for PO header data
PO_ITEMS - for PO line items
Thanks,
Rajeev Gupta

How to synchronize analog input and output from two different USB daq boards

Hi all,
I have two very differnt USB boards the NI USB 6008, which I am using to acquire the data (Analog Input) and a NI USB 9263, it is an Analog Output only board that I am using to deliver a signal (in this case a square pulse). The reason why I am not using the 6008 Analog Ouputs is because I need to deliver negative voltages and need the full +/-10V range.
Looking at similar posts I am pretty sure that I can't use an external trigger or a shared clock, I also tried to use the synchronization of timed structures but no cigar.
I am including a quick vi that I whipped out showing how the signal jitters due to the lack of synchronization. The AO from the 9263 connects to the AI in the 6008 in this example.
Solved!
Go to Solution.
Attachments:
Test Pulse.vi ‏117 KB

I talked to a specialist in the phone and tols me that it is not possible.

Help on settings for the input and output jacks on the macbook

Is there any way of playing music out through the input jack on the macbook so you could have two different music play out the input jack and output jack at the same time or just out of either one?

Is there any way of playing music out through the input jack on the MacBook so you could have two different music play out the input jack and output jack at the same time or just out of either one?
The input lack is only input. If you have an AirPort Express, you can have iTunes send its audio out there and have another application use the MacBook audio output. You can also get an extra audio output via USB with the iMic
<http://www.griffintechnology.com/products/imic>
You can then send audio from one application to the iMic, and another to the MacBook output by hijacking one application with Audio Hijack Pro and using the auxiliary Device Output effect.
<http://www.rogueamoeba.com/audiohijackpro/>

Statistical forecasting....Input and Output at different levels? & MAD and MAPE calculations

Team,
Couple of questions on Statistical Forecasting...
1) Is it possible to have input and output KF at different planning levels?...
2) Is there anyway to see MAD and MAPE values for each Forecast run?
Any help is appreciated....Thanks for your help...
Thanks,
Krishna

Hi Krishna,
#1 - The Inputs and Outputs should be at the same base planning level. Output should be a Stored KF. The input can be a calculated KF.
To achieve input and output at different plan levels, you can do something like this:
I/P KF1@PL1 (stored) Output: KF3@PL2
Create a Calculated KF: KF2@PL2 with calculation like SUM(KF1@PL1) and use this as input for StatFcst
#2 - The result of Fcst run MAD cannot be seen from Excel Client yet, we will address this in near release. If you are on-premise, you can see the results in table: sap.sop.sopfnd.catalogue::SOPFCS_FORECAST_RUNTIME_INFO_TAB
Hope this is useful.
Thanks,
Raghav

I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match. How do I correct this?

I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?

I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.

How can I use a different driver for audio input and output?

I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
What I am trying to do is:
1) Record into Logic Express using my Tascam US-122.
2) Have playback come out of my computer sound system, not the Tascam.
If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
-allen

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

How to view the input and output layouts created in the planning folder?

Similar Messages

Maybe you are looking for