How to view the Material Value Involved in the WIP Closing Balance Report

We are able to see the Itemwise WIP Closing Value using KKAQ.
We have one requirement that to know the Material Value & Quantity Involved in the WIP Closing Balance Summary.
How to fetch the information for Material Value , Process Value With Quantity on Itemwise from WIP Closing Balance.?
Thanks in Advance
Regards
K.Natarajan

Dear Premkumar,
Thankx for your reply. But when we execute the T-Code KKBC_PKO for an Item, It is giving an error like "No product cost collector exist for material/plan/prod.process <Matl.COde>"
How to see this report.
Regards
K.Natarajan

Similar Messages

Dist. of Header Condition based on the material Value

Hi All,
I have one query regarding the header Condition.i have selected the Calculation type as B - fixed amount (mandatory) for a particular Condition type and also selected the header and Item condition indicator.Now if the material have more than one line item then the system distributes this condition based on the quantities in PO.
My client requirement is that they want to have a header condition as we are using now. But they want to distribute this header condition according to the material values for each line items in a PO. please Mention that this condition is a fixed value (mandatory).
So, how can we make a Fixed Value (Calculation type) for a header condition to be distributed among the line items based on the base Value?
Please revert back asap.
Sure, points will be awarded for the same.

as explained earlier ,
system is distributes the header amount on the basic of value calculated by Basic X qty
e.g.
header value =100
two line item
1 is with Rs 4/- and qty is 10
2 is with Rs 10/- and qty is 15
so distribution is
Rs 21.05/- for 1st item
and
Rs 78.94/- for 2ed item
regards,
sujit

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

HT4890 how to view my pictures in iCloud by the browse

how to view my pictures in iCloud by the browse

Welcome to the Apple Community.
You can't, photostream isn't part of iCloud.com, currently.

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

How to view data in tables by selecting the synonym from the database objec

I could not figure out how to view data in tables by selecting the synonym from the database objects navigation tree. I had to first choose the synonym, view the details of the synonym to determine the table name, and then select the table from the database objects tree. Is this the only way available?

This functionality currently does not exist. I don't see it on the 1.1 statement of direction either, so perhaps someone from Oracle can give some insight as to when this could be expected.
Eric

How do you find the average value of all the data between two points on a single channel

I am tring to calculate the average value of all the data points on a single plot between two seperate points
I have attahced an illustration.
Tim
Solved!
Go to Solution.
Attachments:
plot.jpg ‏173 KB

Hey smoothdurban,
I've seen Brad's code, and trust me, it's worth the effort to let him help you get it up and running - it's definitely the most ideal way to solve this problem. However, as Brad said, there are multiple ways to tackle this - both interactive and programmatic - so in the meantime, I'll take a second to detail one of the interactive and sure-fire ways to find the average of data between two points on a single channel.
We'll use"Flags." Set up your VIEW graph exactly as you did on your original screenshot, using Band Cursors to approximate the beginning and ending X-values representing the range you want to examine. Next:
1. Click the "Set Flags" button () that is a part of your 2D Axis System. Note that you can hold down the Shift button if you ever decide you want to do this on more than a single curve at one time.
2. Select the "Flags: Copy Data Points" button that enables after Flags are set.
3. This creates new channel(s) in the default (bold) group in the Data Portal that contains only the Flagged data.
4. Select DIAdem ANALYSIS.
5. Select Statistics » Descriptive Statistics.
6. In the Channels input, select the newly created channel containing your Flagged Y-Data.
7. Ensure that the Arithmetic Mean parameter is set. You can preview the data and the result in the dialog before pressing OK to execute the calculation.
You may have noticed that in the Descriptive Statistics calculation, one of the parameters that you can set is the range of channel rows to operate on - so, if you know the row numbers of your beginning and ending X-values, you could just simply run the Descriptive Statistics calculation and use this parameter to operate on a row subset of your original channel instead of the entire channel.
Derrick S.
Product Manager
NI DIAdem
National Instruments

Accessing the "outcome" value used in the navigation case

I would like to dynamically create a view based on the outcome value used in the navigation case.
How can I reference the outcome value from a backing bean?
For example assume that a page (mypage.faces) can be accessed via outcomeA and outcomeB. I want to know which outcome was used in the navigation case.

Not without implementing a custom navigationhandler.
Alternatively you can also set the known outcome in a bean property and use it instead.
public String submit() {
this.outcome = "foo";
return this.outcome;
<h:outputText value="Outcome was: #{bean.outcome}" />

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

Calculating the actual value when creating the input schedule on BPC NW 7.0

Hello Experts,
I have One questions regarding the calculation when building the input schedule.
the structure of this input schedule is like this:
CV: App01-time-entity-account-version-p_datasource ...
Plan Value Actual Value
Project 1000
In the backend of BPC ,The Actual value is retrived from other system using BW DTP function, and with the monthly based line item. We build the BPC-mutiprovider by the actual value cube and the plan data cube.
From the BPC Office view, we want display the actual value by aggregating historice data till the month which user selected in the current view. These actual data is just the reference for user when they input the plan data. so we dont want these data stored in the application or database.
Can anyone give us some hints?
Thanks a lot in advance!
Best Regards,
Vivi
Edited by: Vivi Sun on Jan 19, 2009 1:12 PM

Vivi,
Were you able to accomplish what you were looking to do? I would appreciate if you could share that info with us.
Thanks.

DCIteratorBinding setting the same value for all the rows.

Hi all,
I have table with on of the column as id. I have made the id column as the hyper link , that takes me to the next page. I am trying to pass the id to the next page. I am using the managed bean for the same. The below code is used to create the link on the column. It sets the action to the function in the bean that sets the id as of the current row.
<tr:column sortProperty="id" sortable="false"
headerText="#{bindings.notification.hints.id.label}"
id="c4">
<tr:commandLink action="choice" text="#{row.bindings.id.inputValue}"
id="cl1" actionListener="#{IdBean.extractID}">
</tr:commandLink>
</tr:column>
below is the IdBean.extratctID()
public void extractID(ActionEvent actionEvent){
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings;
bindings = bindingContext.getCurrentBindingsEntry();
DCIteratorBinding iter;
iter = (DCIteratorBinding) bindings.get("notificationIterator");
Row rw;
rw = iter.getCurrentRow();
String id;
id = (String) rw.getAttribute("id");
this.setId2(id);
I am printing the id value on to the next page. But its just returning the vslue of the id for the first row for all the rows of the table.
Any inputs as in do i need to refresh the iterator or something like that.
Reagrds
Sishant

Hi,
Following is the code i have added in my bean
ValueExpression expression = getFacesContext().getApplication().getExpressionFactory().createValueExpression(getFacesContext().getELContext(), "#{pageFlowScope.emp1}", Object.class);
Object id = expression.getValue(getFacesContext().getELContext());
public FacesContext getFacesContext() {
return FacesContext.getCurrentInstance();
JSPX Code -
<af:commandImageLink id="DuncanAngove"
icon="/john.gif" partialSubmit="true"
actionListener="#{Tweets.setEmployeeId}">
<af:setActionListener from="Duncan Angove" to="#{pageFlowScope.emp1}" />
But i am getting NullPointerException. I have tried it with application and request scope as well.
javax.servlet.ServletException
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
     at org.apache.myfaces.trinidad.component.UIXComponentBase.getValueExpression(UIXComponentBase.java:231)
     at project1.Tweets.setEmployeeId(Tweets.java:40)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     ... 35 more
Thanks
Sishant

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

Why the default value is not the Oracle recommended?

Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?

>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Is the FIFO value stored in the database? Where?

Hi,
We are working on an implementation project of B1 with an integration to SAP ERP. We need to find the stock value somewhere in the database. Does this exist if you are running FIFO? Is running a stock report the only way to find the stock value when running FIFO, nothing is stored in the DB?
Your help is much appreciated.
Br
Anders Petersson

Hi,
Check OIVQ and OIVE tables
OIVQ: Open entry FIFO layer.
OIVE: Open exit FIFO Layer
Thanks,
Neetu

How to view the Material Value Involved in the WIP Closing Balance Report

Similar Messages

Maybe you are looking for