How to view the messages stored in my memory card

hey..
i have just bought the c6-01..and my prev memory card has my messages which are imp ..is there a way frm which i can view those messages
thank u

Symbian^3 currently has no way of looking at stored messages in the memory card. If you would like to access them, load the memory card back to your old phone and sync them to your PC via Ovi suite where these messages can be read on the program. You can move these to the C6-01 via Ovi Suite should you desire to do so.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

How to view the Messages on the Stream Queues in the MQSeries Explorer

Hi,
After you publish the data to the stream queue (SYSTEM.BROKER.DEFAULT.STREAM), how to you see the data on that stream using the MQSeries Explorer.
I could not see any data on the stream, but I have confirmed that the messages are being published because after I register the subscriber, the published messages do get routed corectly.
Is there a way to view published messages on the stream queue. any help would be greatly appciated.
Thanks,
Rushabh

Thanks for replying..but what if there are no subscribers registered for that particular topic and the publisher keeps on publishing the messages for a topic. I suspect there should be some way of knowing for the publisher whether it published the messages on the stream queue or not and hence some way of viewing the messages on the queue via the MQSeries explorer..
Thanks,
Rushabh

How to view hidden window file in a memory card?

I am connecting a memory card to a mac
But i cant view the hidden files in it
It is a window file
Can anyone help ?=)

Symbian^3 currently has no way of looking at stored messages in the memory card. If you would like to access them, load the memory card back to your old phone and sync them to your PC via Ovi suite where these messages can be read on the program. You can move these to the C6-01 via Ovi Suite should you desire to do so.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Hi i am using oracle 10g how to view the content of the stored procedure or trigger ?

Hi i am using oracle 10g .How to edit the content of the stored procedure or trigger ?

jklopkjl wrote:
Hi i am using oracle 10g .How to view the content of the stored procedure or trigger ?
query ALL_SOURCE
SQL> desc all_source
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
NAME                                               VARCHAR2(30)
TYPE                                               VARCHAR2(12)
LINE                                               NUMBER
TEXT                                               VARCHAR2(4000)

How to view the java code of the message mapping,

Hi Experts,
<b>how to view the java code of the message mapping,</b>
how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi sowmya,
Open any Message mapping in IR. Press <b>CtrlShift0(zero)</b> to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.

How to view the payload of a Message if it processed through AAE

Hi All,
Can anybody please tell me how to view the payload if the message processed through Advance Adapter Engine.
I have developed a SOAP to SOAP interface by using Advance Adapter Engine and it is working fine I can see the messages in Runtime Work Bench(RWB) but when I clicked on the Sender and Receiver Adapter I can't see the payload so I am wondering if anyone knows how to view the payload or it is possible to view the payload if the message was processed through Advance Adapter Engine (AAE).
Is there any setting or properties available in NWA to enable or disable the payload of AAE?
Thanks,
Iqbal

Hi All,
Unfortunately I can only see the SOAP Document but no Payload.
here is what I can see
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" soap:mustUnderstand="1">
<sap:MessageClass>ApplicationResponse</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
<sap:RefToMessageId>7597008d-9bef-11e0-a027-000027d151a6</sap:RefToMessageId>
<sap:TimeSent>2011-06-21T10:15:59Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx__Sender_SOAP_AAE_BS</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx_Sender_SOAP_AAE_BS</sap:Service>
</sap:Receiver>
<sap:Interface namespace="urn:xxxxxxxx.com:pi:A_TEST:HTTP_TO_SOAP_AAE">SI_OS_xxxx_Request_AAE</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
<sap:QualityOfService>BestEffort</sap:QualityOfService>
</sap:ReliableMessaging>
<sap:System xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1" />
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
- <sap:Hop timeStamp="2011-06-21T10:15:59Z" wasRead="false">
<sap:Engine type="AE">af.dgx.dbdgx66</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink">
- <sap:Payload xlink:type="simple" xlink:href="cid:payload-75e51c499bef11e0a13a000027d151a6atsap.com">
<sap:Name>maindocument</sap:Name>
<sap:Description>main document</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Do I need to do anything in NWA to enable the payload for Sender and Receiver?
Thanks,
Iqbal

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

HT4910 How to view my photos stored in icloud and manage those

HI,
How to view my photos stored in icloud and manage those

Use the PhotoStream tab of the iOS photos app.

OOM PermGen... How to view the content of permgen

I have a pretty big java application running on windows and linux (redhat) using JBoss as the application server.
The application has been running for a long time without issues and now, with the end of a new release of our software, under heavy load, we are running out of perm gen space.
What I would like to see is a tool that lets me view the content of the perm gen space so I can determine why we are using so much memory.
I am aware of jmap -permstat (on linux only) that should let you view some info about permgem but for me, jmap connects to the java process and never comes back. I tried a profiler (jprofiler) and again, I can't find info about what is occupying the permgen memory space.
Can someone suggest tools, or methods to get to the content of the permgen space so I can determine what our issue is?
Here are our startup options; as you can see it has been tuned quite a bit for maximum performance for our usage patterns.
I would appreciate any help chasing down this issue.
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_02-b05, mixed mode)
-Xms8000m
-Xmx8000m
-Xss256k
-XX:PermSize=256m
-XX:MaxPermSize=256m
-Xmaxjitcodesize96m
-XX:+UseParNewGC
-XX:+HandlePromotionFailure
-XX:ParallelGCThreads=16
-XX:GCHeapFreeLimit=10
-XX:NewRatio=3
-XX:SurvivorRatio=2
-XX:InitialSurvivorRatio=2
-XX:MinSurvivorRatio=2
-XX:GCTimeRatio=19
-XX:MaxTenuringThreshold=128
-XX:TargetSurvivorRatio=90
-XX:+ClassUnloading
-XX:ErrorFile=hs_err_<pid>.log
-XX:HeapDumpPath=java_<pid>.hprof
-XX:-HeapDumpOnOutOfMemoryError

jklopkjl wrote:
Hi i am using oracle 10g .How to view the content of the stored procedure or trigger ?
query ALL_SOURCE
SQL> desc all_source
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
NAME                                               VARCHAR2(30)
TYPE                                               VARCHAR2(12)
LINE                                               NUMBER
TEXT                                               VARCHAR2(4000)

How to view the History of a Crystal Reports iView in EP6?

How to view the History of a Crystal Reports iView in EP6?
Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
Our users would prefer to see a listing of the past runs of the report and choose which report to view. What parameters need set in the EP6 iView to see the history of a report?

Hi Heather,
it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
the link to our developer library :
http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
hope this helps
Ingo

How to view the Syslog Application logs in CLI

On CallManager 6.1.x, how do we view the Application Logs in the Syslog Viewer using the CLI? I know how to view the traces but not the Application or System logs in CLI. My RTMT to a customer is being blocked so I need to use the CLI. Thanks.

Event Viewer-Application Log = /var/log/active/syslog/CiscoSyslog.*
Event Viewer-System Log = /var/log/active/syslog/messages.*
From CLI:
To list application logs:
file list activelog syslog/CiscoSyslog.* date detail
To list system logs:
file list activelog syslog/messages.* date detail
To view a specific application log:
file view activelog syslog/CiscoSyslog.1
To view a specific system log:
file view activelog syslog/messages.1
http://htluo.blogspot.com
Michael

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

How to view the messages stored in my memory card

Similar Messages

Maybe you are looking for