How to view the output maintained at handling unit level

Hi All,
How to view the output which was maintained at Handling unit level in the delivery.
Say for ex:- If we maintain the out put type LD00 at delivery level, we can view the output for the same in the change mode of outbound delivery.
In the same way how can e view the output which was maintained at handling unit level.
Regards,
Mallesh.

Hi,
Go to 'VL02N' transaction code give the Delivery number and from menu Outbound delivery select issue output to. then select the proper output type (already issued) and select the print preview button.
It is just as you see for other output's only.
Reward if it helps.
Thanks
Venkat Cheedalla.

Similar Messages

How to view the output submitted by other user

Product : EBS R12.0.4
Plateform : RHEL AS 4.6
I want to view the output submitted by other users. I have tested it for responsiblity level in which sysadmin can view the other users request but it is labour work. Can anyone suggest to view it with less work.
Regards,

Hi,
you need to understand the new RBAC concept and the involved objects. Just to mention that Grants are here specific EBS-RBAC objects you have to deal with. You need to be sysadmin and functional Administrator to define and assign those objects. I know that the metalink note is short and could be longer, but all steps are right.
If you ask mainly what you are doing by utilizing this notes, you are defining additional where clauses, internally added to the basic object (here concurrent requests) and additionally you are granting rights to get buttons enabled (log / out).
If you need something else, just let me know.
Regards
Volker

*** Urgent - How to view Cursor output in TOAD ***

Hi,
I know how to view the output of a sysref cursor that is an out parameter from an SP, in SQL*PLUS
But is there a way to see the resultset of a cursor in TOAD?
This is urgent.
Thanks for the helping hands.
Sun

TOADs SQL Editor works (almost) the same as SQL*Plus.
You can work with VAR's and PRINT's in the very same way as SQL*Plus.
Furthermore you can do the following:
- Write an SQL statement with a bound cursor (with colons)
- right-click in TAODs Editor
- check for SQL Substitution variables.
- run the script (F9) and a substition pop up »pops up«, from where you can choose CURSOR.
The results will show up in the Data grid.
Note: I am working with TOAD ver. 9

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

How to view the xsl-fo template's output in BI Publisher

Hi,
How can we view the output for the xsl-fo template that is uploaded to the BI Publisher in our local itself?
For RTF Template, we have plugin to view the output in MS-Word itself by clicking the output formats such as PDF / Excel / RTF, similarly can we view the xsl-fo template's output in local itself before we upload it to the Publisher URL.
Any help please on this..
Thanks in Advance

Hello,
open your report for editing, so you see the page with your layouts. Then click on the Link "Show as List" on the upper right. In the List of the output formats select "FO Formatted XML". This enables FO Export.
Then execute your report, click on the small menu item at the upper right. The Menu opens, select Export -> FO.
Hope that helps.
Greetimgs,
Sascha

How to view the input and output layouts created in the planning folder?

Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
Pooja

Hi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps

How to copy the output of procedure to a view or table

Hi...
I created a procedure using Hana Studio and it returns the multiple rows as output.
My query is , how to copy the output to a table or view when it is called like this "cal _SYS_BIC.procedureName "
Please go through the following image:
How to copy the output content to a table or view....
Thank u...

Hi Mohan,
The logic is like, you can attach a view(so called column view) to any procedure which returns a result set. SO, instead of calling the procedure using CALL statement, you can simply query the VIEW to get the result set. Internally the procedure will be executed.
Have a look here :
http://help.sap.com/hana/SAP_HANA_SQL_Script_Reference_en.pdf
Eg :
You create a procedure using a result view ProcView to return its results.
CREATE PROCEDURE ProcWithResultView(IN id INT, OUT o1 CUSTOMER) LANGUAGE SQLSCRIPT
READS SQL DATA WITH RESULT VIEW ProcView
AS
BEGIN
o1 = SELECT * FROM CUSTOMER WHERE CUST_ID = :id;
END;
You call this procedure from an SQL statement as follows.
SELECT * FROM ProcView WITH PARAMETERS ('placeholder' = ('$$id$$', '5'));
Hope this helps you to solve the issue
Sreehari

Sap isu-cic(how to check the output)

HI to all......
In isu-cic how to check the output,i have done all the assign ments like framewrk creation etc...i defined the organizational structure with assign hoder...after that wats the next steps?
can anybody plz reply....
Cheers..
sateesh

Hello satish
Step 1:
Create Framework Id( assign hidden & visible components)
Step 2: Create CIC profile
Step 3: create Org unit and assign person
Step 4: Assign CIC profile to Org. unit (or) person
Path : Easy access screen
Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
In this screen on the top i.e menu bar find Go To
Go To>detail Object>Enchanced object description
Now u r in Maintain object page(T code-PP01)
Now in the Active tab page select CIC profile
Now in menu bar Edit>create infotype
Again u r in new page(T code-PP01)
Enter the CIC profile Id which u have created in customizing
Run T code- CIC0
I hope u r able to see the screen now
Rgds
Madhusudhan

How to view the certificate that a component has been signed with?

Hi all,
Been using java webstart deployment for a while so understand how to sign and deploy java applications.
Question I have is how to view the certificate that was used to Sign a jar. For example, if I signed a jar "myComponent.jar" how can I then view the certificate details within this jar. I currently have an old component which I signed with an old certificate and want to view the experation details.
Thanks in advance
Simon
Edited by: simon_seagroatt on Sep 22, 2009 4:20 AM

You can use command (it will show CN, OU, O, L, etc... and expiration date, of course):
jarsigner -certs -verify -verbose pathToYourJar.jarI'd suggest redirecting output (>>out.txt).
Bye.

[SOLVED] How to view the *exact* name of the currently running kernel?

Perhaps this question will seem dumb, but here goes : I have two kernels installed :
[ruben@arch ~]$ yaourt -Q linux
core/linux 3.2.9-1 (base)
[ruben@arch ~]$ yaourt -Q linux-ck-kx
repo-ck/linux-ck-kx 3.2.11-1 (ck-kx)
Grub’s menu.lst is configured to boot linux-ck-kx :
# general configuration:
timeout 5
default 2
color light-blue/black light-cyan/blue
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
initrd /boot/kernel26.img
# (1) Arch Linux Fallback
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-label/archroot ro
initrd /boot/kernel26-fallback.img
# (2) Arch Linux CK-KX
title Arch Linux CK-KX
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
initrd /boot/initramfs-linux-ck.img
# (3) Arch Linux CK-KX Fallback
title Arch Linux CK-KX Fallback
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
initrd /boot/initramfs-linux-ck-fallback.img
And yet, I see no mention of *-ck-kx when issuing this comand :
[ruben@arch ~]$ uname -a
Linux arch 3.2.9-1-ARCH #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012 x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
It does not matter whether I change the default kernel line in /boot/grub/menu.lst : I can set it to “ 0 ” or “ 2 ” and reboot, and the output of “ uname -a ” will always be exactly the same as above ; no mention of *ck-kx even though I know it is running.
I searched the web on how to view the name of the running kernel, all results I found said to use uname, so is there another command I am missing here ? Or is it normal that both my kernels yield the same uname output ?
Just curious, because I was playing around with kexec, and when doing “ fake ” reboots, I was alternating between the normal ARCH-kernel and the ck-kx*kernel, and I wanted to be sure that it actually worked, so I checked everytime with uname, and since I saw no difference in the outputs, I assumed kexec wasn’t working like it should, so I did a “ real ” reboot, but same uname outputs… So I must be missing something…
Here are the kexec commands I used, just to be sure I am doing this properly :
[ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux-ck.img /boot/vmlinuz-linux-ck
[ruben@arch ~]$ sudo init 6
and :
[ruben@arch ~]$ sudo kexec -l --append="`cat /proc/cmdline`" --initrd=/boot/initramfs-linux.img /boot/vmlinuz-linux
[ruben@arch ~]$ sudo init 6
Thoughts ?
Last edited by Montague (2012-03-15 22:00:02)

litemotiv wrote:
Hmm worksforme:
$ uname -r
3.2.11-1-ck
One question for you litemotiv : do you have two kernels currently installed on your system, like I do, or did you uninstall the ARCH-kernel ? I ask because I might try this :
$ sudo pacman -Rns linux
and reboot, and see what happens…
But before I do that, might as well try to debug it ;
t1nk3r3r wrote:I would point the finger at GRUB, or something occuring near boot-time.
https://wiki.archlinux.org/index.php/Boot_Debugging
So I tried the “ Heavy Debug ” option, rebooted, then issued “ dmesg > dmesg.txt ” ; here are the first few lines of that file :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Mar 1 09:31:13 CET 2012
[ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
and the complete dmesg output is here. I am no expert at reading debuggin output, but from the above, it seems like the default ARCH-kernel is being booted, even though my menu.lst hasn’t changed from my previous post (exept for the debugging options) :
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# (0) Arch Linux CK-KX
title Arch Linux CK-KX
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro rootdelay=5 panic=10 debug ignore_loglevel
initrd /boot/initramfs-linux-ck.img
# (1) Arch Linux CK-KX Fallback
title Arch Linux CK-KX Fallback
root (hd0,0)
kernel /boot/vmlinuz-linux-ck root=/dev/disk/by-label/archroot ro
initrd /boot/initramfs-linux-ck-fallback.img
I want the ck-kernel to boot, what it going on here ? Any more thoughts ?

How to view the sapscript result without directing to Printer

Hi All,
I am new to ABAP. can any one tell me how to view the sapscript output without redirecting to the printer from an abap program.
Help would be appriciated.
Thanks,
hima

There are several ways you can view the output of the SAPscript, without redirecting it to the printer.
1. You can directly view the output using Menu --> Utilities --> Printing Test --> give the default printer as LP01 and click Print Preview button, that should give you the print preview of the SAP Script.
2. You can execute the the driver program, if it is a custom program (Z program) then execute the program, it will give you an option of selecting printer,, give the printer as LP01 and select print preview.
lets say you are trying to view the purchase order "Zmedruck", the driver program for the same can be found using the transaction code NACE. or else you can execute the transaction code ME23N, There you will find a button called "Print Preview" Click that to preview your SAP Script. Menu --> GoTo --> Print Preview.
Similarly you will find options to view your sap script in almost all the standard transactions where you are using your SAP Script.
If you need further information,, give me a mail at [email protected]
if found useful, don't forget to reward points.
Thanks-
Shrikant

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

Scheduling a Report from outside Scheduler but viewing the output in Plus

We are using Discoverer 10.1.2
I know that we can schedule a report within Discoverer Plus and the resulting out put can be seen in Discoverer under scheduled work books
I am also aware that we put Discoverer command line commands in a DOS script and then schedule that script to run using an Enterprise scheduler and automatically export that report Excel.
What I want is to schedule reports using our enterprise scheduler but view the resulting output in Discoverer under scheulded work books
I was thinking that when we schedule a report Discoverer creates a package, something like EUL5_BATCH_PACKAGE080314170249.RUN;.
Once that package is created, if I copy it and rename it and then schedule to run from our enterprise scheduler, would I be able to view the output from Discoverer ?
----- Added on 03/15/2008-------
I did try running the above package EUL5_BATCH_PACKAGE080314170249.RUN from SQL Plus as I had indicated above. The settings on the report schedule were -
- Run immediately
- Never repeate
- Delete the results after 9999 days ( maximum allowed )
Now the first time the report ran automatically using DBMS_JOBS since I had set the report to run immediately.
After that when I tried running EUL5_BATCH_PACKAGE080314170249.RUN from SQL Plus, the procedure completed but when I looked at the Discoverer front end, it indicated the run was in error with Unique constraint violation on EUL5_BQ_TABLES.EUL5_BQT_UK_1 index. However when I looked at the table it did not have any data in it.
I the ran the procedure again from SQL Plus and this time it completed and when I looked at the Discoverer Plus front end, the results were ready for me to view.
When I tried running the procedure again, it failed again with unique constraint violation and when the procedure was executed after that it again ran and i was able to view the results.
So, ever alternate run from SQL Plus was successful. I would continue to try out different combinations of schedule parameters to see if I can get it to work.
However, any one has already tried this before please let me know if what I am trying Is this possible ?
Any help would be appreciated
Thank you
Message was edited by:
manav_purohit
Message was edited by:
manav_purohit

Thanks for the suggestion Rod. However, if I use DBMS_JOB.CHANGE, the report will still run using DBMS_JOB. What I would prefer is to not use DBMS_JOB.
Running anything in DBMS_JOB means, the job is not visible in the enterprise scheduler that we use. Our enterprise scheduler is being monitored at a data center and if any jobs fail, appropriate on call individuals are contacted. Records are kept of failures and root cause is analyzed. So I want to take advantage of these procedures for scheduled reports as well.
I am still looking for some alternative method.

Unable to view the output of a concurrent program

Dear Members,
I am using Oracle R12.1.3 Vision Instance.
I have run the Create Accounting program. When I click on the view output button, the browser gets displayed and also gets closed immediately. I am unable to view the output.
Can any one please help me in resolving this issue?
Many thanks in advance.
Regards.

Dear Members,
I am facing the above problem in IE.
When I tried in Mozilla, I can view the outputs without any issues.
Can any one suggest me why I am not able to view the output in the IE?
Regards.

How to view the output maintained at handling unit level

Similar Messages

Maybe you are looking for