How to view the Planning area, folders, pmr group used in web interface?

Hi Gd Morning,
I am new to web interface in SAP bw 3.5 BPS- web interface. I can see a couple of Web interface developed i want analyze one of them how do i see what is the planning area, parameter group they are selected in the web interface.
Thanks
Pooja

Hi all,
When u right click on the container or any of the objects there in you can see the properties which describes about the planning area, planning package, parameter group been used.
Thanks
Pooja

Similar Messages

How to view the planned orders in mass and how to delete in mass

Hi gurus,
How to view the planned orders in mass and how to delete in mass.
Regards
R.Rajakarthik

Hi,
Use the collective display of planned orders, transaction code MD16.
You can select the data by different options and choose which ones or all that you need to delete.
Click the Delete button to trash them.
This will delete planned orders without deleting the planned independent requirements and sales orders.
Hope it helps

How to configure the permission between folders and groups programlly?

Hi guys,
I am developing extension for permission, here I have a question:
I have a template which contains more sub folders, for each folder the corresponding group should be assigned by certain permission. for example: group g1 has "write" permission to folder f1; group g2 has "read" permission to folder f2 and so on. I assign these permissions by extension programlly. But now I have to provide the possibility (to user) to configure these permissions, that means if in future instead of group g1 has "write" permission to folder f1, group g1 has "read" permission to folder f1. This kind of change should be allowed by extension. Should I set folders and groups as input parameter in an extension, and give the user possibility to input permission type? In another word, my program is supposed to get the permission from GUI and then create ACL. But where can I set the possibility for user to define the permission? And how can I read this permission?
I hope I explained it clearly enough.
Any help is greatly appreciated!
Regards,
Liying

Hi jennifer,
Find this usefull, follow steps at PAGE 3,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
Regards
Juan

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

How to view the iweb html source within iweb using the first iWeb?

Is it possible if so how?
Like I need to know where the footer and Headers are in each page?

Ok. How would I look for the header and footer part of the page?
Like what my hosting company requires?
http://www.profusehost.net/forum/knowledge-base/7924-ad-code.html

How to refresh the client area

i used javax.swing.JPanel and drawed many shapes with paintComponent method. i wonder how to refresh the client area.
ps: i first used paint method to draw shapes, but i found a copy of the menu bar appeared. at last i found paintComponent method works, but when i tried to refresh the client area with repaint, the same scene appears.
could some one help me?
thanks in advance!

when i tried to refresh the client area with repaint, the same scene appears. When you invoke repaint() on a component, the paintComponent() method of that component is invoked. So unless your code in that method is different, the image painted will be the same.

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

http://kb.mozillazine.org/Recovering_deleted_mail_accounts

How to view the input and output layouts created in the planning folder?

Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
Pooja

Hi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps

Performace and how to read the plan

Hi all, i am having some problem with a query. i cannot really read the explain plan. here it is
VIEW of "LOT" #4 (Cost=559,177 Card=35,277,895 bytes=30,868,158,125)
UNION-ALL
     HASH JOIN (Cost=558,852 Card=34,981,759 bytes=9,794,892,520)
        TABLE ACCESS (FULL) of "ENT" #27 Optimizer=ANALYZED (Cost=13 Card=6,214 bytes=267,202)
        HASH JOIN (Cost=541,331 Card=34,981,759 bytes=8,290,676,883)
           TABLE ACCESS (FULL) of "SMASTER" #28 Optimizer=ANALYZED (Cost=573 Card=282,970 bytes=17,261,170)
           HASH JOIN (Cost=459,945 Card=34,981,759 bytes=6,156,789,584)
           INLIST ITERATOR
               TABLE ACCESS (BY INDEX ROWID) of "INTERFACES" #29 Optimizer=ANALYZED (Cost=2 Card=5 bytes=100)
                   INDEX (RANGE SCAN) of "INTERFACES_INDX1" UNIQUE Optimizer=ANALYZED (Cost=1 Card=1 bytes=)
           HASH JOIN (Cost=457,468 Card=153,919,741 bytes=24,011,479,596)
           TABLE ACCESS (FULL) of "POS" #25 Optimizer=ANALYZED (Cost=1,819 Card=5,756,878 bytes=132,408,194)
           TABLE ACCESS (FULL) of "L_POS" #26 Optimizer=ANALYZED (Cost=179,932 Card=153,840,627 bytes=20,460,803,391)
TABLE ACCESS (FULL) of "HOLD" #31 Optimizer=ANALYZED (Cost=325 Card=296,136 bytes=40,866,768)can somebody tell me what is happening. what steps gets executed first then next and next, etc? it looks like the cost is a lot and this is hurting the performance.
i know tuning involved a lot such as stats, index use, # of rows, etc.
what i am looking for here is how to read the plan, any idea what this is doing? please explain. also any recommendation to improve the plan base on the plan above. thanks

A quick search in google for oracle reading explain plan
Top hits are very nice writeups...
http://www.akadia.com/services/ora_interpreting_explain_plan.html
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/ex_plan.htm
vr,
Sudhakar B.

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

How to view the tables/views available in Oracle

HI,
I am creating DB connection and importing the data from Oracle TABLES/ Views. I just want know how to view the tables/views available in Oracle. (I have the login details). Can I view thru TOAD? Pl let me know the best way and suggestions/ views / Links/ whitepagers.
Regards,

Hi,
I don't remember exacly: RSA1 -> source system -> "replicate datasources". Works this also in a DB-source system. I think so.
=> you get all tables that your user has authorisation.
This function execute for example (in oracle there are same information tables: dba_tables, user_tables ...) following select in the database:
select TABLE_NAME from DBA_TABLES;
Sven

Non zero values in the extraction of the planning area

In our DP implementation we have been trying to extract 2 key figures from the planning area, one of the key figures might have zero values, when we set the indicator for the non zero values then it only eliminates the records for which both the key figure are zero but that is not what I want. I am trying to have a setting in the data source where we can reject the records even if one of the key figure has zero values.
Are there any settings for that while we are generating the data source.
Thanks in advance

Hi Colin,
This can be easily solved using a slightly different ABAP routine. You can assign the fields that you need to check into other field symbols and then check the value of those field symbols.
Here's one possible solution. I based in from the ABAP code you posted.
field-symbols: <LS_EXTR_BLOCK> TYPE any,
                     <ls_fcst> type any,
                     <ls_hist> type any.
data: w_pos type sy-tabix.
loop at ct_data assigning <LS_EXTR_BLOCK>.
w_pos = sy-tabix.
assign component '/BI0/9AVCORFCST'
   of STRUCTURE <LS_EXTR_BLOCK> to <ls_fcst>.
assign component '/BI0/9AVCORHIST'
   of STRUCTURE <LS_EXTR_BLOCK> to <ls_hist>.
if <ls_fcst> = 0 and <ls_hist> = 0.
delete ct_data index w_pos.
endif.
endloop.
Aside from the solution above, you can also define the structure of CT_DATA (that's basically the structure of the extract structure of your datasource). You can then assign the contents of CT_DATA to a field-symbol and the delete data using that field symbol.
Here's an example:
TYPES:
TY_DATA_TABLE type table of *PUT THE NAME OF YOUR EXTRACT STRUCTURE HERE*.
field-symbols:
<FS_DATA_TABLE> type TY_DATA_TABLE.
DELETE <FS_DATA_TABLE> WHERE /bi0/9avcorfcst = 0
and /bi0/9avcorhist = 0.
You can check the name of the extract structure by viewing table /SAPAPO/TSAREAEX field EXPORT_STRU. You can also see the name of the extract structure in debug mode by looking at the value of the parameter IV_DDIC_REFERENCE.
Hope this helps

How to view the java code of the message mapping,

Hi Experts,
<b>how to view the java code of the message mapping,</b>
how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi sowmya,
Open any Message mapping in IR. Press <b>CtrlShift0(zero)</b> to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.

How to view the Planning area, folders, pmr group used in web interface?

Similar Messages

Maybe you are looking for