How to view the video transition ?

Hi there,
I am new to Final Cut Express. I just bought it bcos the store has opening 10% discount offer.
I went to effects > transition tab & saw there are a list of video transition. I can only see how the transition looks like after I drag it into the video timeline & placed it between 2 still photos.
But how to I skim thru & see how each one looks like before I choose it ? When I click any of the transition, both the preview screens do not show the transition !!
Any ideas ?
Thanks

I personally print a manual.
You should be able to print just the pages you require without printing the entire 1150 odd pages.
In Help>Final cut Express User Manual, open it up and go to Index, Click T and find Transition in the list.
There will be a load of sub-entries, click the page number of a likely sub-entry and the PDF opens to that exact page. I find this quicker than looking in a book, although like you a real pain to study. Give me a real book any day.
Chapter 35 pages 520 through 524 explains what transitions do in the PDF manual I use.
Al

Similar Messages

How can I view the videos of adobe flash player that apple no longer support?

How can I view the videos from the internet and networking of adobe flash player that apple no longer support?

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

How to view download videos from the sony HDR cx160 to Mac (Lion)?

I am not sure if this is the correct forum for my question. I just bouhgt a Sony HDR CX160 camcorder and need to download/view the videos on my Mac (Lion). Could you please help me with this issue or direct me to the correct forum? Sony's answer is to contact Apple...? Thank you very much in advance!

I am not sure if this is the correct forum for my question. I just bouhgt a Sony HDR CX160 camcorder and need to download/view the videos on my Mac (Lion). Could you please help me with this issue or direct me to the correct forum? Sony's answer is to contact Apple...? Thank you very much in advance!

How to view the settings of the sequence (info that appears when you first open sequence)?

Hi I would like to ask how to view the current settings of the sequence i am already working in, the same information that appears when you first open a new sequence
eg.
General
Editing mode: QuickTime DV PAL
Timebase: 25.00fps
Video Settings
Frame size: 720h 576v (1.4587)
Frame rate: 25.00 frames/second
Pixel Aspect Ratio: D1/DV PAL Widescreen 16:9 (1.4587)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Audio Tracks:
Audio 1: Standard
Audio 2: Standard
Audio 3: Standard
I have forgotten which setting I chose for my current sequence and have tried to look under project settings and also sequence settings
but the info that you see when you first open a new sequence doesn't show, especially if the editing mode is PAL or NTSC etc.
How can I find out this information that my current sequence is on?
Thanks

Thanks for your reply
Is there a way to see what preset I chose when i first chose the sequence? As under 'sequence settings' i don't see this info.
e.g
DV PAL "Widescreen 48kHz"
As i do not remember and fear it may ruin the HD video I am currently editing.
Thanks

How to view youtube videos from iphone 4 to tv using composite AV cable

Hi,
Can any one please help me as to how to view youtube online videos on TV through my iphone 4. I tried connecting the iphone 4 and TV with a composite AV cable however I can hear only the audio but am not able to view the videos.

It seems so stupid that you cant sort videos by date. Some please tell is that we are idiots and tell us how? And if u simply cant, well a big shout out goes to google for being right on top of things. I hate google! Company is too big and they cant keep up apparently. Sooo much junk on you tube and they cant give us filter and sort options on the most widely used tablet on the market.? Gawd pleeeeze tell me im an idiot!

How to view local videos on iOS mobile device

How do I view local videos on my iOS device running an Adobe Air app? I know how to view the CameraRoll for iOS in Flex on Adobe Air, but the CameraRoll class only brings up photos, no videos. When I use:
if (CameraRoll.supportsBrowseForImage) {
                                                  var roll:CameraRoll = new CameraRoll();
                                                  roll.browseForImage();
                                        } else {
trace("Camera Browsing not available");
The cameraRoll instance that is brought up only shows photos, no videos. Any ideas?

+1 I need this as well.
It looks like it's simply not available in CameraRoll - is support planned? What are other possibilities - File? Navtive extension?
Would AIR even be able to play typical phone video formats? From a quick search, it seems that the iPhone captures h.264 in a mov container, while at least one Android phone captures MPEG-4 in a 3gp container. I'll try transferring such videos to my computer and embedding them in a test app just to see if they play.
Thanks for any insight!
ETA: The docs for NetStream list h.264 and 3gp as supported formats. From my testing, however, NetStream does play the iPhone .mov file, but does not play the Android .3gp file. A Loader plays neither.

I want to transfer the Video transitions from premier Pro to Premier Pro CC 2014 I like to use the old video Transitions?

I want to transfer the Video Transitions fro premier Pro to my new project in Premier Pro CC 2014 what can I do? My e-mail is( [email protected] )

Hi
How did you "transfer" Express?
It might be better to re-install Express 9 from scratch, though without an Optical drive you would need to:
a) Use an external Optical drive
b) Make a disk image of the installer on another computer and then copy that image to the rMBP
c) Make use of Apple's Remote Disk
http://support.apple.com/kb/HT5287
CCT

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to delete the videos in Ipod and Itunes ?

Could you let me know how to delete the videos in Ipod application in my Iphone 4 to release more space ?

If you don't want the video on your iphone then uncheck the video in itunes and sync your phone. If you want it removed from both the phone and itunes delete it from itunes and sync your phone.

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

Error message when attempting to view the video.

When attempting to watch a video posted to Facebook or on a forum, I get an error message when attempting to view the video. "An error occurred while processing your request. Reference #50.8dd8d3d1.1354457866.1cac8e50". I'm able to view videos via YouTube. The error seems to occur when video are embedded in a post/thread.

I was hoping someone could provide some help.

I have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY

i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

How to view the video transition ?

Similar Messages

Maybe you are looking for