How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
"Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff: I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....) I understand the "Reference-monitor" doesn't help either at this.
I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
Software: Premiere CS3 version 3.2.0
Operating System: Mac OS X (v10.4)

You can only do this in the multicamera monitor. That's what it's there for. Proper procedure is to cut there, then go to the timeline and add transitions.
If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

Similar Messages

How to view two clips with 50 % transparency each at the same time?

How to view two clips at the same time with 50 % transparent each (end of one clip and the starting of the next clip in time line) so that one overlapping the other, both can be seen. This is to merge two clips, so that I can stop at the correct frame of the first clip and start at the appropriate frame of the next clip.

You're familiar with the TRIM-tool?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

How to view code of all the custom and complex folder folder

How to view code of all the custom and complex folder folder in EUL?

You do not need to run all the reports.
Also i am not sure about why do you need to see the code of every thing, i assume you will not get much from it.
If there is a certain folder you are interested in then this is the way.
Any way there is no way to get the code of the complex folders since they are logical join of other folders.
to get the code of the custom folder s you can use:
select * from eul_us.eul5_objs t
WHERE t.obj_type='CUO'
AND t.obj_object_sql1 IS NOT NULL;
you should look (and concatenate) at the obj_object_sql1,obj_object_sql2.....
Tamir

HT4910 How to view my photos stored in icloud and manage those

HI,
How to view my photos stored in icloud and manage those

Use the PhotoStream tab of the iOS photos app.

How to view the planned orders in mass and how to delete in mass

Hi gurus,
How to view the planned orders in mass and how to delete in mass.
Regards
R.Rajakarthik

Hi,
Use the collective display of planned orders, transaction code MD16.
You can select the data by different options and choose which ones or all that you need to delete.
Click the Delete button to trash them.
This will delete planned orders without deleting the planned independent requirements and sales orders.
Hope it helps

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

How to grab two IEEE 1394 cameras simultaneously?

Is it possible to grab two or more firewire cameras simultaneously? I have two Sony XCD-X710 cameras and they are both connected in same card in PC. Grabbing works fine with only one camera, but when trying to grab two cameras simultaneously, the computer will crash. Sometimes it crash immediately and sometimes it takes few seconds to crash.
Used frame rate is quite low (about 3.75 fps).

It is definitely possible to acquire from two or more firewire cameras simultaneously, as long as you are not exceeding the bandwidth of the firewire bus (which you should not be at a frame rate of 3.75 fps).
What version of the NI-IMAQ for IEEE 1394 driver do you have? There were some issues with version 1.1 of the driver with certain cameras and simultaneous acquisition, and these were resolved in version 1.5 of the driver. If you have not yet upgraded to version 1.5, contact NI Sales at (888) 280-7645 for a free upgrade.
If you already have NI-IMAQ for IEEE 1394 version 1.5, please let me know and I would be happy to assist you further.
Best regards,
Dawna P.
Applications Engineer
National Instruments

USING TWO TRACKS OR MORE SIMULTANEOUSLY

What is the best way to record two tracks or more at the same time. For instance drums, or a amp/direct signal at the same time.?

(no need to yell)
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks

How to merge two conflicting contact on iPhone and on laptop?

How to merge two conflicting contacts?
When syncing my iPhone w/ my Mac laptop, it seems that Apple does not provide an option that allows you to merge the data from two conflicting contacts. For example, you have a contact on your iPhone for Andy Summer and a contact on your laptop for Andy Summers - one contact contains only Andy's name and email address, the other contact contains only Andy's name and his mailing address. I'd like to be able to merge the data from these two contacts into one and save it to both, but the Conflict Resolver in the syncing program (I think it's in iTunes) does not offer an option for merging the two.
Does anyone have any knowledge about 1) how to merge data from two conflicting contacts, or 2) some other way to keep the data from each so that I don't have to choose one over the other?

Jawad,
First of all,You need to make teaming on both the interfaces on the server side.Which mode do you want to use? Active-Active or Active-Standby.
Server side :Active-Active - You need to configure the switch side to be a etherchannel/LACP. It can be done by the commands on the cisco 4006.
Server side :Active-Standby - You need nothing to do at the switch side.
Note: Seems PAGP is a proprietary of cisco. Server shouldn't know that. To be bound with mode "on" of "lacp" should be fine. It depends on the server side as well.
HTH
Thot

How to run two programs with one PC and two monitors

Good Morning,
I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
Thanks in advance

Hi Parker,
yes, it's possible. You also have properties to set windows to specific monitors...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How do I delete tracks I have recorded and don't want to keep?

How do I delete songs I have recorded and don't want to keep on garageband?

Larska wrote:
How do I delete songs I have recorded and don't want to keep on garageband?
http://www.bulletsandbones.com/GB/GBFAQ.html#deletegbprojects
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to use two or more mics simultaneously on a firewire interface?

hey i have the fireface 400 and am using it with logic. how do i use both mic pres on the front of the fireface simultaneously. for example i want to record an acoustic using two mics. probably a simple question please help me out.

How do you "use" them? Please be more specific...
Make sure you choose the correct inputs on the relevant tracks..
If that doesn't help you I've heard stamp collecting can be fun.

How to view two video files synchronously?

i have some questions about video/audio merging !
first, i have two video chips a and b ,how can i merge them into only one file,and when i view it ,the two video chips will paly together, a is on the left,and b is on the right.
second, i have two audio chips about telephoning. c is the record of one terminal,and d is the other record of terminal .i want to conbine c and d as only one file ,so,when i play it ,i will hear a full conversation.
trird, how can i merge the video and audio files ,and then play it together.

These are back-ups for the IFO files, which are used for play and control functions for the DVD.
http://filext.com/file-extension/BUP
You really need the VOB files to view or edit the DVD video.

How to sync two tracks automatically?

How to automatically sync bpm of a track with another track?
Thank you.

I believe it is a limitation of the Sun MQ product that only 1 broker can be instanciated per machine.
There is no workaround, afaik.
I believe that this limitation is documented in the installation notes of ISW.
Regards,
Ludovic.

How to view purchased track history?

Hard drive went down and lost some tracks that were not backed up. In an attempt to determine what I lost, would like to see entire purchase history. When I select 18 months in history no purchases are displayed. This is not correct. Many were executed within the past 30 days.
Any suggestions? Do I have to use the same computer on which they were purchased?
Lou

Found it! Was looking in Store instead of iTunes. History is available when logged in and then by licking on login ID field.

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

Similar Messages

Maybe you are looking for