How to view two video files synchronously?

i have some questions about video/audio merging !
first, i have two video chips a and b ,how can i merge them into only one file,and when i view it ,the two video chips will paly together, a is on the left,and b is on the right.
second, i have two audio chips about telephoning. c is the record of one terminal,and d is the other record of terminal .i want to conbine c and d as only one file ,so,when i play it ,i will hear a full conversation.
trird, how can i merge the video and audio files ,and then play it together.

These are back-ups for the IFO files, which are used for play and control functions for the DVD.
http://filext.com/file-extension/BUP
You really need the VOB files to view or edit the DVD video.

Similar Messages

  • How to view .bup video files?

    My parish priest sent me five video files that have a file name that end in .bup - for example: VTS_01_0 file type .bup
    Is it possible for me to view these?
    Thank you.

    These are back-ups for the IFO files, which are used for play and control functions for the DVD.
    http://filext.com/file-extension/BUP
    You really need the VOB files to view or edit the DVD video.

  • How to view original video files from my Canon Vixia

    Hi -
    I have a Canon Vixia camcorder and I cannot find a way to view the original mts files on my iMac.  I hate to say this, but my old windows laptop to does this without any issue, so that's what I'll continue to do until something changes.
    When I mount the camera on my Mac, it only shows one giant AVCHD file.  I have read the posts about using iMovie to import the AVCHD file and then export the individual clips, but frankly that ***** for a few different reasons that I don't really feel the need to explain. 
    Why does Mac not allow me to simply view the files as they are on the camera?  I don't edit with iMovie, I edit with Premiere and the original mts files are just fine with me.  I love my iMac and all my other Apple products, but let me view my files! ...please?
    Thanks
    Joey

    AVCHD utilizes a proprietary container format. The MTS files are in there, you just have to know where to look.
    Navigate to the root directory of the memory card. You should see a rather large (depending on how many clips are on there) file called PRIVATE. You need to right-click that and select "Show Package Contents". Inside, find the file AVCHD, right-click it and select "Show Package Contents". Inside, find the file BDMV, right-click it and select "Show Package Contents". Inside, find the folder STREAM and open it. You should find the MTS files there.
    HTH.

  • Re: How to merge two video files in a single file.

    If you want to get just sequence of two files, so you can use http://java.sun.com/products/java-media/jmf/2.1.1/solutions/Concat.html I suppose.
    Or some for merging on http://java.sun.com/products/java-media/jmf/2.1.1/solutions/

    Hi watergad,
    ThX good help!
    NeuralC

  • How can I combine two video files into one finished file?

    I'm making a video of a guitar player.  I'm using two cameras simultaneously.  One gives the overall wide shot, and the other is zoomed in on his hands.  Both cameras run at the same time.  I would like to use the wide shot as the main video, and occasionally fade in clips from the zoomed in shot to show details of his playing.  I can manually line up both files so they are synchronized.  How do I cut a clip out of the main (wide) shot, leave the gap there, and insert a clip from the closeup?  I'm putting the two video files on two of the video timelines and synchronizing them that way.
    Any suggestions on how to proceed?

    The effect you are looking for is 'Picture in Picture'. If you want the gap to be there for the duration of the timeline add some 'black video' - from the Tasks Pane> New Item - on the video track above the main track. Resize / position it to where you wish it to be.
    Then with your second clip (now on video track 3)
    Do the same sizing / positioning for it.
    split video and audio and delete or disable the audio.
    Cut it where you want the various start/ends of the fade to be.
    Delete, or just disable (right-click) the unnecessary segments.
    Apply fade in / out to the remaining segments.
    [EDIT]
    Also check out the 'Presets' in Video Effects. There are a variety of PiP presets that may do what you need.
    [/EDIT]
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

    How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
    "Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff:  I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....)   I understand the "Reference-monitor" doesn't help either at this.
    I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
    Software: Premiere CS3 version 3.2.0
    Operating System: Mac OS X (v10.4)

    You can only do this in the multicamera monitor.  That's what it's there for.  Proper procedure is to cut there, then go to the timeline and add transitions.
    If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

  • How to play the two video files simultaneously in Xletview

    Hi All,
    How to play the two video files simultaneously in Xletview. But only one video must be visible to user and the other video must run in the background(Invisible to user). I need to implement like broadcasting channel, I don't want to stop the current video while switching to another video and vice versa.
    Is it possible to do in Xletview 0.3.6?. Or Anybody tried this?...
    Sourab.

    I think no one try this with xletview!
    xletview is not for that!

  • What is the best way to edit/sync two video files?

    Has anyone had experience with editing 2 movies files?  I have recently taken video with 2 cameras of the same quality and am attempting to 'merge' the two video files.  What's the best way to 'sync' the 2 files?
    Thanks

    The real answer is to do this in Final Cut Pro X with the new multicam feature with automatic syncing using the audio wave forms.
    However, it is quite possible in iMovie.
    Here is how I did it in iMovie.
    I recently did this for a video of my niece's senior voice recital. (Video is below)
    The key is to use the Cutaway feature of  iMovie. If you are not familiar with Cutaway,here is a good tutorial from Ken Stone.
    I used the side camera as my base clips, and used the back camera as the cutaway clips. The back camera audio track was OK but had too much coughing and noise.
    Here are tips for getting it lined up perfectly.
    1) In iMovie/Preferences make sure that you check "Display Time as hh:mm:ss:frames" so you can edit to the frame level. (Also, select "Show Advanced Tools so you get the Cutaway feature)
    2) In the iMovie Project View, set the thumbnail slider to 1/2 second so you have a great deal of control.
    3) Initially, leave the volume at 100% on the Cutaway track, so that both tracks are playing. You can hear when they are off.
    4) Click the "Waveforms" button in the Project view, so you get a visual cue of how to line up the tracks.
    5) Between the audible cues and the visual cues, you can nudge the cutaway back and forth one frame at a time by dragging until you have it perfect.
    6) When it is lined up to your satisfaction, set the volume slider of the Cutaway track to zero, and turn off the waveforms. You can also move the thumbnail slider back to 5 seconds or so.
    7) For some of the fine work, I switched to the "single row timeline view". This slows you down a bit, but lets you see the waveforms more clearly.
    8) I made heavy use of the iMovie Comment Marker feature. I watched the whole base video/audio track and inserted comment markers at the points where I wanted the Cutaway to begin and end. For example, a comment might say "Insert Cutaway 1". I would usually time the cutaway so it started at a distinct audio event, such as when the piano start. This comment marker made it easy to drag my cutaway to a point that was approximately correct.
    9) If you need to do a lot of cutaways, I find that it helps to use the SPLIT CLIP command in your project. This way you can have a single cutaway per clip, and this makes it easier to manage and is less processor and memory intensive for iMovie. I would use the comments to mark the entry and exit points of the cutaway as described above. I would then select that portion of the clip that included these markers plus a little more, so that a yellow border is around the selection. Then right-click/SPLIT CLIP (or CLIP/SPLIT CLIP in the top menu). This does not physically splt the clip within the Event. It only virtually splits the clip in the project.

  • How to Open Two Excel Files in Multiple Monitors in Windows 7

    How to open two excel files in two excel windows using multiple monitors in Windows 7.
    Currently it opens multiple files on top of each other on the same one monitor.
    I found this article in a blog it says
    "The snap feature that you are looking for will not work unless you open two instances of Excel. This is because Excel Unlike Word is not a True SDI Application. Microsoft is aware of the Issue however there is no resolution to the problem but the workaround"

    If you are working almost the entire day in front of your computer at your office with lots of Excel Sheets and Word, then probably you might be working with a
    dual monitor or may be even more than that. Studies have shown that having an additional monitor increases the productivity by 20 to 30 percent (Source: NY Times)
    But some applications like MS Office Excel, even though you open multiple files, they are all from the same instance of the application. So if you want to compare two
    Excel
    files, then you may not be able to have it in two
    separate monitors as the files are loaded using the same instance of Excel. If you move one
    Excel
    file to the other window, the other Excel files are also moved to the other window.
    So how to have two separate Excel files or other application side by side in dual monitors?
    Option A:
    In Excel 2003, go to Tools -> Options ->
    General tab.
    Make sure the option, ‘Ignore other applications’ is checked. Now all the Excel files will be opened as separate instance and you can move the Excel files individually across the monitors.
    In Excel 2007, Click the Office button ->
    Excel Options -> Advanced.
    Under General, check ‘Ignore other applications that use Dynamic Data Exchange’.
    or
    As this method forces each Excel file as a separate instance, the memory consumption will be more. If you don’t want too many memory consumption then you can open only two instances (see
    Option B) and manage wisely to view in both the monitors.
    Note: If you are having issues like Excel opens without displaying a workbook, then you may have to
    uncheck this option. (See Microsoft Help for more details on this). You can use option B in this case. I have this option checked and I have not faced any issue yet.
    Option B:
    They key here is, the application has to be loaded as separate instances. Lets say you have opened an Excel file in
    Monitor 1 and you want to open the next excel file in Monitor 2. You can usually open another instance of Excel by browsing through the
    Start Menu -> Programs -> Microsoft Office ->
    Excel. Make sure this newly opened Excel file is the last Excel file you had viewed and then double click on the Excel file that you wanted to open. This will force the Excel to
    open
    in the second instance of Excel. Now you can move these
    two excel files separately across windows or monitors.
    This may be little cumbersome way to open new instances of Excel every time. The easy solution would be to keep these links in the
    quick links near the Start button. So, every time you want to open a new instance of the application, you can just use those quick links.
    hope work thanks
    http://www.lytebyte.com/2008/05/13/how-to-open-two-excel-files-side-by-side-in-separate-monitors/

  • How to Move a Video File from Movie Section to "TV Shows" Section

    I have an Ipod classic, and am trying to figure out how to move a video file from the "Movie" section to the "Tv Shows" section. I have Itunes version 1.3 which for my device is listed as the most current version.

    haha itunes 1.3, epic.
    to clarify that, I think he would have an ipod classic 80gb which the newest version is 1.3 I think.
    However to answer your question, in itunes right click the movie, go to properties, then go to options, where it has media kind put it to tv show
    Message was edited by: Nudethecih

  • HOW CAN I TRANSFER VIDEO FILES FROM MY PC TO IPAD MINI VIA ITUNES??? WITHOUT ANY ADDITIONAL DOWNLOADABLE APP

    HOW CAN I TRANSFER VIDEO FILES FROM MY PC TO IPAD MINI USING ITUNES???  i have to google every little thing that has to do with my ipad, why cnt they make it more user friendly???? i have to dl another app just so ican transfer vid files to mu ipad mini. i already converted them to the proper format. i just cant seem to find out how to transfer with with only itunes

    im just new to itunes and ipad mini is my first apple product thats why im really having a hard time with this. i cant transfer the video file to my library... i tried dragging it to the "movies" part in my library but it still doesnt copy to the movie librarry just like how i do it with my songs.. not even the typical list appears.... all it says is movies and studd about the library and itunes, ill post a pic so u can see...

  • How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
    The answer depends on the type of video files you want to convert.  If they are DRM protected commercial videos, no help can be given here.  Google.

  • How do i move video files from PC to iCloud?

    how do i move video files from PC to iCloud?

    You can't move videos to iCloud, but you can upload photos

  • Play two video files at the same time.

    I am trying to play two video files at the same time. I create two threads, each of which has its own frame, playing button, and builds its own graph to play the file. Now everything seems works except that when the first file is being played and I hit PLAY
    to play the second file, the program plays the second file but the first one is paused; furthermore the control button has no response for the first one. Did I miss anything? Can anyone help me figure out the problem?
    Best,
    Fayin

    You don't need separate threads for 2+ playback pipelines because the filters create worker threads internally and don't block execution on calling thread.
    If you decide to keep separate threads, you will have to follow Michel's advice and have message pumps on those threads.
    You can also have both files in the same graph, in which case you have perfect sync between them (both start playing together in sync), however you cannot pause/stop/run files separately.
    The problem you described is most likely not a DirectShow problem and is rather about generic threading, COM or window messaging.
    http://alax.info/blog/tag/directshow

  • How to view a PDF file

    Hey, i was wondering if anyone knew how to view a PDF file in Java? I'm trying to make a button that will open a PDF file. Is there any other way without downloading an extension?

    Kandyman wrote:
    The thing with downloading extensions is that they are not free. Some are trial version. iText and Jasper are probably free and stable to a great extent. Plus they allow you to play with PDFs, Excel, Bar charts, Pie charts, CSV etc etc without the hassles of the heavyweight Swing.
    - Vaibhav Beohar

Maybe you are looking for