How to view "View Session" in Premium Access Zone

Hi all,
can you please tell me how can i view session...
when iam trying to clicl on the link it is not showing any hyper link...
is this link only for SAP employees or any other persons who have special access..
can please help me in this Regard
Thanks & Regards
Naresh Reddy K

Naresh,
PAZ is accessible for SAP Tech Ed'06 attendees of Las Vegas and Amsterdam. If you want access you can buy access to all the content of PAZ at a price of 416 dollars.
Ref : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/40896030-3961-2910-d6a8-bf6f92465b28 [original link is broken]
5 sessions are available as free of cost
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/40c37f45-c688-2910-e7b9-cbbcb0c08c1d [original link is broken]
Regards,
Jai Shankar

Similar Messages

How to view sessions belonging to Premium Access Zone

Hi,
Can any one let me know how to read and run the sessions that are avaialble in
the Premium Access Zone tab of SDN network?? When i tried clicking on the option "View Session" it does not take any action. Kindly help.
Many Thanks,
Maha

Suggest answer was in the right direction, but I needed to see a lock that was held for more than 30 minutes for a session that had expired. I found what I was looking for by navigating to Targets / Databases / dbname / Performance / Top Activity / View Data = Historical
Then I dragged the shaded box to the time interval when the locking issue occured (clearly visible in the colorful graph showing the spike when the problem occured). This showed the session id and query that was suffering and I could generate an ASH report.

How to view session parameters of other sessions?

Hi
I have a problem with an application that is related to character sets, codepages and NLS settings.
As all my tests (with sqlplus) where successful I suppose the application is setting any NLS parameters that cause the problem. To further investigate the issue I'd like to see the session parameters of the session the application is using.
I know NLS_SESSION_PARAMETERS has the information for my session, but how do I get the information for any other session?? Is this possible at all?
best regards,
Marcus

So I have to do tracing? There is no view or table where I can quickly lookuo the info? That's a pity!
Anyway, meanwhile I found out that the backend of the application has the ability to send custom SQLs to the server. So I just did a select on NLS_SESSION_PARAMETERS from there and voila there was a configuration issue...
Ok, another question, maybe a dumb question, but I am missing NLS_CHARACTERSET in NLS_SESSION_PARAMETERS.
NLS_CHARACTERSET is available in NLS_DATABASE_PARAMETERS and in V$NLS_PARAMETERS - but not in NLS_SESSION_PARAMETERS.
Shouldn't it be possible to set the characterset within the session to adjust the output to the local client? If I set the NLS_LANG=language_territory.charset on the client, where does the charset go?

How to view only specific authentication requests in access tracker

Requirement:
How to view only "Healthy/Unhealthy" requests from a specific Webauth service.
Solution:
If we have more than one Webauth service (based on conditions such as Device type or NAS IP or posture status etc) and we need only Healthy/Unhealthy requests from a specific service in access tracker for administrative use; we need to create a custom Data filter.
Configuration:
Below are the steps to achieve the same:
Navigate to Monitoring > Data filters > Click on "Add" option to create a new filter
Specify a name on the "Filter" tab
Select the "Rule" tab to specify the unique condition (to filter the access tracker request)
Create the below conditions:
( Commonystem-Posture-Token CONTAINS Healthy )
- AND - ( Commonervice CONTAINS Windows-health-check )
5. Save this filter
Now we can use this Data filter in access tracker to only view Healthy Webauth requests from "Windows-health-check" service.
Verification
So now we can verify the output by looking at the access tracker.
At present we can see "Eight" webauth requests in access tracker. Now we want to see only Healthy web-auth request from "Windows-health-check" service.
We change the data filter to the Custom "healthy-filter" and now only see one request in access tracker as per our requirement.

Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information.

How to view corrupt ms access database?

How to view corrupt ms access database? When you open a written "Application Error" and all. Tried to import objects into a
new database. Tables and queries were imported without a problem, but on the forms, reports and modules gives the same error.

if it fails to recover all known methods, which are described in google, then you need software - such as MDB Viewer Tool from http://www.mdb.viewertool.com/ Somewhere
seen a similar problem on the forum if it fails to recover all known methods, which are described in google, then you need software - such asMDB Viewer Tool from http://www.mdb.viewertool.com/Somewhere
seen a similar problem on the forumhttp://www.filerepairforum.com/forum/microsoft/microsoft-aa/access/1318-unable-to-open-mdb-file-please-help

View session objects?

Using wl 8.1 sp2
Is there anyway (using the console?) of viewing session objects on the
server?
thanks
harry

I am new to ADF business components..I see that there is AM pooling and passivation/activation issue..
Andrejus Baranovskis's Blog: Bad Practice for Session Scope Access in ADF BC
Andrejus Baranovskis's Blog: Solution for Sharing Global User Data in ADF BC
and
Application State Management
40.8.5 How to Use Transient View Objects to Store Session-level Global Variables

How to view my WEP Key ?

I need to connect to my Airport Extreme Wireless Network from a WIndow XP configured Macbook.
WIndows requires the Hexadecimal WEP key to connect.
How do i get this?
To be sure, i have read many similar questions on this forum and tried :
- The network preference panel. The "show password" tick option remains grayed out.
- The Airport utility. The "equivalent network password" on the Base Station meny remains grayed out.
- The Keychain access utility. I can only find the alphabetic passord, not the hexadecimal WEP key (of course tried to enter the alphabetic one, but did not work, so i assume it is expecting the hexadecimal one....).
- In one of the posts, the contributor is bemoaning about an upgrade on snow leopard that makes getting to view the WEP key absurdly complicated. He provides a link :
http://www.adamriggins.com/2009/11/16/how-to-view-saved-wifi-passwords-in-osx-sn ow-leopard/
... which unfortunately is not working anymore...
I do clearly remember easily retrieving the WEP key 2 or 3 years ago, maybe from OS leopard at the time. I don't quite understand why it's been made so difficult now. Was there a security issue ? then is there an Apple note summarizing those facts and recommanding steps for previously set networks ?
Anyone who can help on this is very welcome.
Thanks in advance
YM

well first of all why are you using wep? don't you realize that all wep networks can be cracked in 15 minutes?
older versions of windows xp do not know WPA/WPA2 if you are running the latest service pack then it should support WPA or WPA2
if for the life of you cannot determine the WEP password no matter how hard you try. i found mine by going into keychain and clicked on show password and there was my wifi password
then you might as well just download the latest version of airport utility, write down all the important settings, and then use the reset button to erase everything and then reconfigure it from scratch. and then you will know your password.
while you are there, if you can turn on wpa, by all means turn it on

How to view my final ebill after porting numbers?

Does anyone know how to view my final bill? When I ported my five telephone numbers two weeks ago to AT&T and Verizon deactivated my online account. I still receive emails telling me my bill is ready to view online but I cannot log in, it tells me its an inactive phone number.

Thank you, but I was enrolled in e-billing and received an email that my bill was available online. But cannot access it.

How to View/manage Files on Internal Storage?

Does anyone know how to view/manage files on the Droid Mini? I did find a list of 'Misc. Files' in 'Settings' under 'Storage'. But it only gives the option to delete. My old phone had a 'Files' app (that came on the phone) where I could view/manage all files. I'm sure I could just plug into my laptop, but I would like to have file access on my phone. Is that even possible? Is there a *good* App I could upload perhaps? Any suggestions?
Thanks =)

The Play Store. Search for "File Explorer". Select one from the several found.

How to view files uploaded in a directory through jsf

Please tell how to view the files in a directory using adf .Using jdeveloper 10g

Hi,
I assume the user has a directory on the server where his/her files go. In this case, you can use Java in a managed bean to access the folder and create a collection of the entries.
http://www.exampledepot.com/egs/java.io/GetFiles.html
Frank

How to view body of SOAP error (in Java)

I'm trying to track down the source of a "Server" error I keep getting back when trying to invoke Web Services from Java code. I can't figure out how to view my SOAP response to get the details of the error message. So all I have to work with now is "javax.xml.rpc.soap.SOAPFaultException: Server". I created the Web Service endpoint in JDeveloper by loading the .wsdl file and selecting "Generate Web Service Proxy" - So I can't view my SOAP message/response - I just call the 'accountInsertOrUpdate' method.
Should I expect the SOAP body to have a more detailed error as to what is causing the 'Server' error?
Does anybody know of a method where I can view the SOAP body being sent out and received?
I consistently get this Server error when trying to call any Oracle CRM On Demand method (about 2-3 times in a row) and then the method call works fine - no changes on my side (it is just in a loop to retry if a Server error is encountered). (If I view the Web Service Utilization in CRM On Demand - it doesn't show any of the 'Server' errors - only the successful login, method call, and logout.
Any ideas would be greatly appreciated - Thanks!
Brian

I just figured out how to view the body of the SOAP error. (I just needed to cast the Exception as a SOAPFaultException to view the details).
This is the error I consistently get: Internal Error: Session is not available. Aborting. (SBL-ODU-01006)
So now my question - has anybody else run into this?
I log in - get my session id. Try to call a method and get (2 or 3 times in a row) this 'Session not available' error and then it works. I try and make another method call and get 2 or 3 more 'Session not available' errors.
I thought it might be a timing issue (where I am making too many requests/second) so I added a little 'sleep' time between method calls with no difference in response.
Ideas?

Multiple View sessions, same PC?

View 6.0.1, Client 3.3.0
Can I have multiple View sessions from the same PC? In other words
Launch the Horizon View client, login, and access a desktop
Launch the Horizon View client again, login as a different user, and access a different desktop
Repeat until I have many session open at once
The reason I ask is we are migrating from Exchange to Gmail. Google provides a utility called GAMME that in a larger environment can be run from multiple machines with each machine migrating one portion of the alphabet. Rather than using 10 physical machines I would rather use 10 View desktops. This will work slick if from my real PC I can access all 10 view desktops. I will be using a different login account to access each desktop.

Have not tried yet. I did not want to go through the time setting up a separate non-persistent desktop pool if I could not login to more than one desktop at the same time. Now that I know it will work, I will run with it. Thanks for the help

HOW TO VIEW PAGE OF ONLIE BOOK IN PDF FILE

i HAVE A PDF FILE THAT i AM TRYING TO OPEN AND READ IT IS A ONLINE MANUAL THAT ONLY SHOWS 8 PAGES OF A BOOK THAT IS ABOUT 400 PAGES CAN i VIEW THE RESET OF THESE PAGE BY CONVERTING THE FILE OR NOT?

I just figured out how to view the body of the SOAP error. (I just needed to cast the Exception as a SOAPFaultException to view the details).
This is the error I consistently get: Internal Error: Session is not available. Aborting. (SBL-ODU-01006)
So now my question - has anybody else run into this?
I log in - get my session id. Try to call a method and get (2 or 3 times in a row) this 'Session not available' error and then it works. I try and make another method call and get 2 or 3 more 'Session not available' errors.
I thought it might be a timing issue (where I am making too many requests/second) so I added a little 'sleep' time between method calls with no difference in response.
Ideas?

How to view node failover logs

Hello,
I have a two node 3.2 cluster. Due to some reason the active node fail over to standby node. Please let me know how to view the time and the reason of fail over in a log file? I checked /var/log/cluster but could not get this info.

Hi,
as I said before, nearly all problems with SC can be analyzed using the messages in /var/adm/messages. There are additional SC specific log files in /var/cluster/logs, most notably the commandlog, that tells you which user issued what cluster command. And there are dataservices specific logs in the DS subdirectory. This is sufficient. I do not think that having access to the eventlog will help you any further. I have never used it so far and I am a heavy SC user for 10 years :-)
Regards
Hartmut

How to view the process template of the instance

Some of the workflow tools ( for ex: MQ Workflow) provide a way to see the design of the process template graphically. When an instance is created out of the process template, user can see the process stops of the instance graphically. While one could see on EM Flow trace of the instance, it only shows the steps so far completed. I am unable to know what stop I am at in the complete flow of the process map. May be I am missing something, but if you can point me in right direction how to view the stages of a process instance ( completed and yet to be completed) I rellay appreciate.

What about this?
SELECT pid
FROM v$session s, v$process p
WHERE p.addr = s.paddr
AND s.sid = :sid; -- replace :sid with your session idRegards.
Al

How to view "View Session" in Premium Access Zone

Similar Messages

Maybe you are looking for