How to wake up opened MacBook from sleep -x only external display running

How to wake up opened MacBook from sleep - only external display running? I dont shut down my MacBook and I am using only external monitor. Lid closed it is not good idea, sometimes is MacBook and main MacBook display to warm. So I must six times per day open and close my MacBook. Any solutions?

Sure, the added heat sink and dissipator will help. Although a gel pad has a lot of heat capacity, meaning it has the ability to absorb a lot of heat, eventually it will saturate with heat from the MB and reach a point of stasis. Then it gets rid of heat the same way the Mac does, namely radiation and conduction into other things around and in contact with it, including air. Of course the Mac has a fan if it needs it. The gel pad doesn't.
If the gel pad is sitting on a metal surface, like a steel file cabinet or something like that, it helps to drain the heat away from the pad, and by extension, the Mac. The aluminum cookware worked like that. I had heat capacity of its own, but more importantly, it added to the surface area that was performing convection cooling. So, yes, both together give a better result.

Similar Messages

  • Mouse Not Antialiased After Wake from Sleep? (on external display)

    I've been noticing something very strange lately: after waking the MacBook Pro from sleep, the mouse on the screen is no longer antialiased and is instead quite rough looking — it also has no shadow. I've only noticed this when using an external display. If I'm using the MacBook's built-in screen instead this doesn't happen. Not really a huge problem but I was wondering if anybody else had this issue and if there's a fix. Thanks.

    I'm sorry, what? Forgive me if I say that your reply doesn't make any sense. This issue almost certainly has nothing to do with the hard drive failing (or being too stressed), nor is it a lack of RAM. In fact, given that it's only with the external display (Apple LED display), it really almost certainly has nothing to do with the hardware it all. Without a doubt, it would appear, it is a software bug of some kind. For example, if I log out and log back in again, it's fine. So, a minor annoyance, but I'm curious if anyone knows about it/knows of a fix.
    For the record, I haven't "bell/whistle"d the Finder at all. I don't see how that's relevant in any way, anyway.
    I personally speculate this is some sort of bug with Mac OS X; I was wondering if anyone else had had a similar issue.

  • How do I get my Macbook Pro to detect an external display?

    Hi there.
    I just bought a new MacBook Pro today.
    Everything about it is wonderful, except:  When I plug an external display into the Thunderbolt port using a Minidisplay port to VGA adapter, it doesn't send a signal to the external monitor.  The screen on my Macbook will go blue for a second, and then the windows freeze.  The mouse will be movable for a bit (up to a minute), but nothing is clickable.  Strangely, it seems as though it's functioning as if there were a second monitor (I can move the mouse off-screen as though it's going over to another display).  But then the spinning rainbow wheel starts and never stops.  If I unplug the Minidisplay port to VGA adapter, the Macbook will snap back into professional mode and everything works again.
    If I try to boot the computer up with the Minidisplay port to VGA adapter already pluged in, it simply won't boot up (I get a gray screen with an apple and nothing more).
    I tried using gfxCardStatus set to "discreet only" and I still have this problem.  I tried to run a firmware update, but my comp seems to be entirely up-to-date already (just set it up today).
    The monitor and adapter seem to be working fine, and function as an external display when pluged into the Mini-DVI port on my 2009 Macbook running Snow Leopard.
    I guess my question is, what's causing this?  Is this an adapter problem?  Like, do I need a special adapter to use with a Thunderbolt port as opposed to the one I'm using which works when pluged into a Mini-DVI port?
    Model Name: MacBook Pro
      Model Identifier: MacBookPro9,2
      Processor Name: Intel Core i7
      Processor Speed: 2.9 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 8 GB
      Boot ROM Version: MBP91.00D3.B08

    The only thing that I can suggest is trying a different adapter - such as this one from Monoprice.
    I don't know if that's the root of your problem, though. Does the external monitor have DVI? You could get a Thunderbolt to DVI adapter from Monoprice - here - and give that a shot.
    Clinton

  • Problems connecting to Monitor after waking up MacBook from sleep

    Hi,
    I am experiencing a lot of problems connecting my macbook pro to external monitor once I put it to sleep. I have tried every options like setting up PRAM and all, but it just wont work. Sometimes the restart works and sometimes it wont. I am using a Samsung monitor. I have no idea what to do, as I keep on clicking Detect displays and it just wont do anything. Can anybody please help me as to how I can wake up my macbook from sleep and get it connected to the monitor. I have a mac keyboard and bluetooth mouse, but neither would wake the mac. I have change my bluetooth settings so that the mouse should be able to wake it up..

    William Rivas wrote:
    William Rivas wrote:
    William Rivas wrote:
    Linc Davis wrote:
    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
    Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. Repair permissions on the startup volume.
    7. Turn off Bluetooth and test.
    8. Reset the System Management Controller.
    9. Reset the PRAM.
    10. Reinstall OS X.
    Updating to 10.9.2 did the trick. So I thought. Does anyone have a solution?
    Thanks!

  • I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

    I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
    Using 2 displays, connected via HDMI and thunderbolt
    Been on to support a number of times now - is anyone experiencing the same issues?

    BUMP.
    I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
    kernel[0]: Previous Shutdown Cause: -128
    I don't know if that's related or not, but maybe helps?

  • How can i stop my Macbook from saving every file opened?

    How can i stop my Macbook from saving every file opened?

    Take a look at this link, http://osxdaily.com/2012/07/11/disable-auto-save-and-versions-in-mac-os-x/

  • How can I wake my iMac up from sleep mode? Can I do it via iPad?

    How can I wake my iMac up from sleep mode? Can I do it via iPad?
    I've set the "Wake on Demand" in the system preference, but don't know the way to wake it up.

    It wakes up automatically in response to requests for certain sharing services.
    About Wake on Demand
    Search for an OS X application called "WakeOnLAN." Search the iTunes App Store for iOS apps with "wake on LAN" in the description.

  • Occasional reboot when waking MacBook from sleep.  iTunes related?

    Recently, sometimes when I'm waking my MacBook from sleeping, instead of waking, it reboots. I'd say, one out of twenty times.
    It started around the same time I started subscribing to PodCasts. (I'm not using an iPod with them, just downloading them to the MacBook and listening to them through iTunes.)
    My iTunes version is 7.0.2.
    Any clue as to why this may be happening? Or, more importantly, how to resolve this issue?
    MacBook Mac OS X (10.4.8)

    Hi, sugapablo.
    I wouldn't think your PodCast subscriptions are the cause. However, you could cancel your subscriptions for a few weeks and see if that sorts it out.
    Here are some troubleshooting ideas that I think may be more relevant:
    1. Have you applied the "MacBook SMC Firmware Update 1.1."? That update fixed a problem with <<a href="http://docs.info.apple.com/article.html?artnum=304308">spontaneous shutdowns — at a guess, your problem may be related.
    2. You may want to try some of the troubleshooting steps cited in the following documents:• "http://docs.info.apple.com/article.html?artnum=303234."
    • "Mac OS X: Why your Mac might not sleep or stay in sleep mode."
    3. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
    4. You cited that it reboots. However, if you are seeing the following message
    that indicates a kernel panic.
    If so, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
    5. You may want to search the "MacBook Discussion" for similar reports.
    6. Since I suspect your MacBook is still under warranty, you may want to contact AppleCare
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • TS4209 When i wake up my iMac from sleep my wifi is disconnected.  It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyon

    When i wake up my iMac from sleep my wifi is disconnected.  It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyone help?

    Had the same issue and finally solved it.  After the upgrade to Mavericks our 2 new Macbook Airs stopped connecting automatically to Wifi while the older machines the kids had still worked fine.
    Bought a new airport extreme and problem solved.   Our Airport Extreme was about 5 years old and was probably not compatible with the new OSX.
    BTW this was after trying everything people suggested on this forum and a 4 hour marathon tech support call with Apple where we reinstalled the OSX.
    ***** to need to spend $200 but glad the problem got solved.
    New extreme is also mega fast so its all good.

  • Trouble waking macbook from sleep

    Im having trouble waking my macbook from sleep once i close the top of my computer. I can just make out the outline of my desktop but it is very dark. It takes around 4-5 minutes before the screen of the computer illuminates. I have tried holding down F2 as well as tapping the power button but neither seems to work. does anyone have any suggestions?

    Same here. I did bring it in and they exchanged it but the new one is even worse. Once it gets into this cycle, I can get it to the login screen, it won't accept my password (even making SURE i enter it correctly) until the third time. Then it accepts it and bam, goes to sleep again. Only a hard reboot fixes it for a time. It happened this morning, so we'll see how long until it happens again. We have two other macbooks (a late 07 model and a macbook pro from early 08) that do not do this.

  • HT1444 how can I upgrade my macbook from 10.5.8 version to the latest version

    how can I upgrade my macbook from OS X 10.5.8 version to the latest version?

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs.  You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759

  • How can I upgrade my MacBook from Tiger 10.4.11 to higher?, how can I upgrade my MacBook from Tiger 10.4.11 to higher?

    Stumped on how I can upgrade my MacBook from OSX Tiger 10.4.11 to higher? 

    Hello,
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they do have it:
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

  • How do i keep my mac from sleeping during time capsule back-up?

    How do I keep my mac from sleeping during time capsule back-up please?

    In System Preferences>Energy Saver, set sleep time to "Never".
    Clinton

  • Is the trackpad supposed to also wake up the computer from sleep?

    Hello,
    I am not sure if I am able to before, but right now making a swipe or even a click on my trackpad doesn't wake up the computer from sleep - although typing on the keyboard does. Is this really the case? Or can the trackpad also wake the computer? I've already tried resetting the PRAM but it would still not do the trick. It doesn't bother me much though.
    Thanks!

    Swiping the trackpad should also wake the computer. Touching a keyboard key that is benign is usually preferred. i.e. shift key.

  • How can i stop my macbook from getting my kids texts from their phones attached to my itunes?

    how can i stop my macbook from getting my kids texts from their phones attached to my itunes?

    APPLE ID for each device family member itunes
    http://www.apple.com/support/appleid/basics/

Maybe you are looking for

  • Deleting more than one row at a time

    Hey all, Im trying to be able to delete rows from my arraylist and UI table but im getting Index out of bounds exep. I think its because of the numbering, like counting through the i in the for loop is making it look at something different. Can anyon

  • Light leakage macbook pro 13 inch?

    Hi everybody, My macbook pro has backlight leakage from the bottom of the screen. It can only be seen clearly when I use 2/3 or full brightness, watch movies in the dark room, or set black background. Is it normal? because i have sent it to repair tw

  • DME generation for multiple banks

    Hello, Our client in USA has 6 banks, and we have to generate DME for all these 6 banks, and we have to go through PMW for these requirements, now in FBZP for the country there is only 1 PMW maintenance for a given payment type, even if I configure 6

  • ACSv3.2 with 802.1x client authenticaiton using LEAP

    Hi there, I was wondering if this has happened to anyone here. I have a Windows 2000 Server running ACSv3.2 - Once every 4 months ACS will fail to authenticate all the wireless users that have Active Directory accounts. Auth-Failure code: ?External D

  • What happens after I use a emergency call?

    Just wondering what happens if I use an emergency call what happens after