How to wall mount?

How do you wall mount HP 2401 LED backlit monitor?

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the back of your monitor. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
If you have a L2401x or a x2401 monitor, it appears that a VESA adapter plate was included with your monitor. Please see HP L2401x and x2401 LED Backlit Monitors User Guide for information on the use of the adapter plate,
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

How to wall mount imac 20 inch intel? Any body has tried

How to wall mount imac 20 inch intel? Any body has tried

The iMac 20" doesn't have a VESA-type mounting bracket on the back (the 24" one does). If you're brave and have the white plastic model, you can try [adapting an old iMac G5 mount kit|http://www.wikiela.com/wiki/Howto_wall_mount_a_Core_2_Duo_Intel_iMac_20_or17].
For other models, you can use the VESA adapter from [www.imacmount.com]. These are adapters that clamp a VESA-style mount bracket to the aluminum pedestal stand for the iMac. You can then attach the iMac (pedestal and all) to any VESA-compatible mount. Here's a picture of an 20" white iMac fastened to a wall using this method (same works for newer aluminum iMacs and the white 17" ones too):
!http://www.imacmount.com/sitebuilder/images/imacmount2-760x600.jpg!

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Wall mounting Apple Studio Display 17" M7649

I have a recording booth and am using the Apple Studio Display 17" M7649 as a display for copy. Currently is sits on a shelf. I need to get rid of the shelf due to echoing.
Is it possible to wall mount this monitor...if so ...How?
Thanks,
Antny

Sometimes those ports just die. Wouldn't be the first time.
Other times, it is the ADC connector that is the issue.
Try replugging the ADC connector.

WCS does not support wall mount orientation of 1131 & 1000 APs w/int. ant.

I have been unable to determine how to indicate wall mount orientation of APs in the WLC for the 1000 series (AireSpace) and 1131AG series access points.
I can set the rotational direction they are pointing if ceiling mounted , but cannot indicate if they are located on the wall or ceiling.
I am assuming a ceiling mount configuration is all that is supported in the WCS.
As an aside, when attempting to correctly orient the antenna direction on the 1000 series AP, the diagram used on the WCS to indicate the orientation of "0 degrees" mark on the access point shows an AP as if it were sitting on a table (an invalid orientation - wall & ceiling are the recommended orientations). This means that you have to mentally "flip" the controller over to account for ceiling mount and then determine which way the arrow should be pointed on the WCS map - not much fun.
Any suggestions for dealing with wall-mounted orientation? Have I missed something?
For ceiling mount installations, how critical is it that the antennae orientation be configured on 1131AG and 1000 series models?
For wall mount, I would imagine that for determining location and RF planning that the wall mount / ceiling mount orientation would have a significant affect, yet I cannot seem to find any way to set this orientation.
- John

I have been unable to determine how to indicate wall mount orientation of APs in the WLC for the 1000 series (AireSpace) and 1131AG series access points.
I can set the rotational direction they are pointing if ceiling mounted , but cannot indicate if they are located on the wall or ceiling.
I am assuming a ceiling mount configuration is all that is supported in the WCS.
As an aside, when attempting to correctly orient the antenna direction on the 1000 series AP, the diagram used on the WCS to indicate the orientation of "0 degrees" mark on the access point shows an AP as if it were sitting on a table (an invalid orientation - wall & ceiling are the recommended orientations). This means that you have to mentally "flip" the controller over to account for ceiling mount and then determine which way the arrow should be pointed on the WCS map - not much fun.
Any suggestions for dealing with wall-mounted orientation? Have I missed something?
For ceiling mount installations, how critical is it that the antennae orientation be configured on 1131AG and 1000 series models?
For wall mount, I would imagine that for determining location and RF planning that the wall mount / ceiling mount orientation would have a significant affect, yet I cannot seem to find any way to set this orientation.
- John

Is it okay to "wall-mount" an Airport Time Capsule sideways?

Just bought a new Airport Time Capsule to replace an older "flying saucer" Airport Express. Is it okay to mount the ATC sideways? My main concern is the internal HD. is there a problem with an HD spinning sideways over an extended period of time? Any other reason I should not mount it sideways?
A bit more explanation (only if you are wondering why I need to mount it sideways):
I need to mount the ATC on a wall because placing it in the hallway is the only way I get full signal strength throughout my apartment (old building with thick walls and lots of corners). I am using the old AE mounting bracket with zip ties, at least until I can determine a better way and/or location. Sideways mount determined by how the mount works and how the wiring is fed into the unit. I guess Apple decided that users would simply put these things on their desks or bookshelves.
Thanks in advance!

Thanks Bob, I just got off the phone with Applecare, and they said for optimal signal strength, the unit should be mounted upright. But I was told if I am getting a good signal as set up, there's no reason to change it since there is no risk to the HD.
Regarding airflow—good point. I did take that into consideration. The vents appear to be on the bottom of the unit, so mounting the unit sideways leaves that surface completely open. So I don't think airflow would be impeded. Here, I am making an assumption about how the engineers intended the ATC to work. When I have the time, I'll build a small shelf to wall mount the unit in it's upright position.
Thanks—this is the type of info I am looking for. I'd like the unit to last a while before I have to replace it.

Cinema VESA wall mount and original iMac G5?

This has probably been asked before, but does the Cinema VESA wall mount like this one:
http://www.macconnection.com/ProductDetail?Sku=5202648
Work with the iMac G5 1.8 Ghz original model? Or is only the original wall mount that came out when that iMac came out able to work with it?

I was hoping to find something on this forum about locating the VESA adapter kit for the G5 iMac and your thread is all there is . Every on-line retailer that shows them in stock actually have none (I called 5 different ones...Why can't they update websites?!?!)
Did you have any luck finding one. I am moving into a smaller studio and I desperately need to mount my 17-inch iMac. I can't find anyone anywhere! I even called the Apple store number listed on the website and the guy on the phone acted like he had no clue how to even search to see if Apple had any and his response was, "AppleCare would probably be able to help you out more than I could.." Sure enough I got transfered to a dead-end and after 20 minutes I hung up the phone!
What happen to all of the VESA mounts they had. I swear like 3 months ago they were selling them in the on-line store! What does Apple do with all of them? Trash them?
Anyways, please let me know if you were successful. So far I am getting no where

Wall mount solution for AppleTV2?

I have a plasma hung on a wall in my bedroom and I also have a AppleTV2 connected to it, but it's currently just dangling from the tv wall mount. Are there any wall mounts for the AppleTV2? The only one's I can find online are for the first generation AppleTV. How are others mounting their AppleTV2 to the wall and/or tv on the wall?

Hello my freind
I just brought the following and it works great will mount on any surface cut one bit in half
Velcro 60239 HeavyDuty Stick on Strips 50mmx100mm Black
Make sure once you stick it to the surface you leave it to bond for 24 hours as the sticky side has to take before you peel the velcro off of each other then you simpley just remove it each time buy pulling it off the velcro fixxing. It is so strong fixxing it will never move you would think it was screwed to the wall not stuck with velcro.
Also cut two thin strips and put them on each end of the remote and again on the wall, again wait 24 hours for it to bond to the wall.
This will mount your remote when not using it next to your apple tv 2.
The strips of velcro honnestly hold items upto 7kg a strip I could not belive it when i tried it , I just thought i would try it and was amazed at the result.
I forgot to say make sure the spike side of the velcro is on the wall as it seams to be the stronger side so when you remove it it is slightly easyier to remove it still will take some edging to remove as the velcro is also really strong.
Hope this helps you with a great solution at a cheap price kindest regards Lee

Wall mount new iMac

Hi
I was already to buy one of these and then I have read that it is not possible to wall mount the iMac. Is this true? Is there no way of wall mounting and is there ever likely to be?
If it is true that you can not wall mount it I wonder how many sales Apple are losing?
Thanks

Mike
Thanks. Tracked it down and ordered one yesterday. But they keep it well hidden. The only way to find it is using Google, which is ironic! In case anybody else from the UK reads this post the link is
http://store.apple.com/uk/browse/home/shop_mac/family/imac_vesa
Cant wait to get my hands on my first Apple computer apart from the iPad!
Thanks agian for all you help.

Is there a wall mount retro fit for iMac deskto

I have a 4 year old iMac desktop. Can a wall mount be retro fit?

If your iMac is one of these models, there is an adaptor kit available from the online Apple Store:
VESA Mount Adapter Kit for iMac
Here is the video showing how its installed:
fitting the VESA Kit

Wall Mount Bracket - TouchSmart 610

I want to wall mount my TouchSmart 610 PC and have found the below link:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02756312/c02756312.pdf
Where it states:
Designed for flat-panel displays ranging in size from 508 mm to 582 mm (20 inches to 22.9
inches) diagonal, and weighing up to 22.7 kg (50 lb)
My question is, why does the bracket have to support a weight up to 50lbs? The all in one only weights 26lbs and the brackets that support 50lbs are bigger and much more expensive to buy..... Can't a bracket that supports say up to 30lbs be sufficient?

Hello Scooby 2020:
HP store sells our wall mounts there are three types to choose from. Just use chat window and ask operator witch one is best one for your computer. Prices very to. You want to check and make sure the bracket holes matches what is on your computer mount holes. They always over rate the waight of the holder because they do not want it to fall or brake a mount that is why they recomend the stronger mounts. A 30 LB bracket might brake virus a much stonger bracket at 50 LBs. http://www.shopping.hp.com/en_US/home-office/-/search-SimpleOfferSearch;pgid=c7twGfjc0ptSRpIq7ZUcoGX... You are welcome. If it was my computer I was hanging witch cost almost $1000.00 I would want a strong support to hold it and not some cheep model support. If you do use a 30 lb mount How much money would you loose if it breaks. Your cost of your computer replacement. frrw

How do I mount a partition at a specific mount point.

How do I mount a partition at a specific mount point? For example I see a Vol01 disk image, which is a partition of one of my hard drives, sitting on my desktop. Under the disk utility it says that its mount point is /Volumes/Vol01. How do I mount this partition as a file system at /Users?
Thanks, much appreciated.

why do you want to do this? it sounds like you want to keep your home directory on an external drive. this can be done without changing the mount point of the external. copy the home directory to the external. then in system preferences preferences->accounts, unlock the lock at the bottom, control-click on your user and select "advanced options." In the resulting popup change the location of the home directory to the external.
in general to change the default mount point of a drive see this link
http://beta.jamesstroud.com/jamess-miscellaneous-how-tos/os-x-admin/os-x-firewir e-mount-point

My iPod Classic is stuck in disk mode, won't charge on a wall mount, iTunes won't recognize it, and it got this way from me trying to restore it like it said. What do I do now?

So, I tried to restore my iPod to the factory settings via iTunes. It has been a few days now and its still stuck in disk mode telling me "Do Not Disconnect" and it only charges on my laptop. I tried hooking it up to a wall mount to charge and than it told me that I need to use iTunes to restore it. Here's the thing, it won't leave disk mode and its not registering on my iTunes. What can I do to get it back to normal,
Oh yeah, all of the latest updates for my software and iTunes are current.

Mee too!
That's my SMART DATA results:
Retracts: 134
Reallocs: 351
Pending Sectors: 1
Start/Stops: 124
Temp: Cur 35c
min 19c
mac 47c
What can we do?
Change HD?
I also tried to restore it in the DFU mode, but still rebboting in disk mode!!!

How do I mount a second hard drive in Beige G3 its listed in the profiler

Inherited a 300 Mhz Beige G3 with 6 GB system drive running OS 9.2.2
Has a card in SCSI Bus 1 with IDE drive cable. I have installed a 60 GB drive on the sled and the system profiler recognizes it as Mac OS Extended, but says the drive is not mounted.
Hate to be stupid in front of so many people but, how do I mount the drive.. the profiler is the only place it shows up?
Also has a Firewire/USB card in PCI slot 1. Any chance firewire or USB will actually work?
I eagerly await your responses.

Some PCI-slot Drive Controller cards report to the System they are SCSI Controllers to be able to use the more mature and flexible SCSI drivers with "Logical Block Addressing" instead of the older "Track-Head-Sector" addressing. Track-Head-Sector has not worked for so long the drives are all faking that they have 32 or 64 heads, even in drives only 9 mm tall.
These Controllers can then support up to two drives, often larger than 120 GB each, on each of two cables, if they have places to plug them in.
One problem is that if you format it in OS 9 on the motherboard-attached cable, you only get the ATA/IDE driver. If you want to move the drive to the card later, you really do need the SCSI driver on it, so it must be reformatted while attached to the PCI card.
If you have an OS 9 CD, a later version of OS 9 Drive Setup can be found in the Utilities folder on the CD. You need not boot to the CD or install to use it, just insert the CD, and when it mounts on the desktop, open the Utilities folder and double-click Drive Setup.
Mac OS X will usually format all major brands and many obscure ones. If you check the checkbox for "Install Mac OS 9 Drivers" you get the OS 9 IDE/ATA driver, the SCSI driver, and the IDE/ATA in FireWire Driver ALL installed.

How do I mount an external Firewire HD when booting into single user mode?

Hi,
How can I mount an external Firewire Harddisk from the Darwin Console, once I have booted into single user mode?
I'm trying to make a backup of all my files and then re-install my iMac G5 since it doesn't start the GUI anymore and I haven't gotten any responses to my question here: http://discussions.apple.com/thread.jspa?threadID=1104762&tstart=0
Thanks,
Torsten

ok, I executed the following commands:
/sbin/fsck -fy
/usr/libexec/registermach_bootstrapservers /etc/mach_init.d
autodiskmount
There were two messages:
UniNEnet: Ethernet address 00:14:51:32:19:b8
and
Aug 29 20:55:29 launchd: server 2e3b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[16]: exited abnormally: Hangup
I don't know whether this has anything to do with the commands I entered.
And since I don't know what the volume name for the external Firewire HD is, I typed
ls -l /Volumes
but the only volume that is being listed there is my iMac's internal HD.
What should I do next?
Thx!

How to wall mount?

Similar Messages

Maybe you are looking for