How to watch Mp4 Movies With same clarity (HD,1080p,720p) in Ipad3

Hi
I am changing my 1080p and 720P videos into MP4 to upload in IPAD 3 , but they are loosing their quality on IPAD....How to fix it..How can i watch them with same clarity on IPAD3..
Thanks In advance

FreeStudio from DVDVideoSoft

Similar Messages

How to watch mp4 movies on ipad 2

Hi
I have an ipad 2
I wish to download some mp4 movies from the net and watch them on my ipad 2
Could some one please post a step by step procedure ...
Download where ? On ipad or PC ? Then synch where ? How ? Is impossible to directly down,load on ipad 2 and watch there
I searched around and most help topics are on ipad 3 ...but I am interested in watching mp3 on ipad 2 so I am posting here
Thanks in advance
Best regards
Subu

You can't download directly to an iPad.
You have to download on a PC and sync through iTunes.
They have to comply with these specs:
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG‑4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

HT3042 how to watch dvd movie with bluetooth

I want to watch a DVD movie on my macbook air using the dvd drive on another macbook pro. How do I do this?

You can't do it over Bluetooth - it isn't fast enough at all. Plus if you were close enough to have Bluetooth access then you might as well just watch it on the MacBook Pro.
How to share a drive is described here: http://support.apple.com/kb/HT5287 but it doesn't work with DVD movies because they are protected.
So you can't do what you want to do.

How to watch .avi movie with Divx codec?

is there any option for Mac other than using Divx player?

Hi, C.T.B.
For complete information about viewing AVIs and DivX files on Mac OS X, including converting such to QuickTime, see my "Playing AVIs and DivX Files" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How can i watch a movie with subtitles

how can i watch a movie with subtitles

Yes. Go to settings on your apple tv. Audio video. Subtitles and closed captioning are in there.

How to play a mp4 movie with DTS audio?

Hello,
I try to play a mp4 movie with DTS audio on the z1 player but i dont get any sound...I also have downloaded the app mx player, but this also wont play the dts audio. Any suggestions?
Thanks,
Edy

http://forum.xda-developers.com/showthread.php?t=1831111
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How do I import movies with an AVI format taken with a digital SLR?

How do I import movies with an AVI format taken with a digital SLR?

If you cannot import using File Menu > Import Movies... You'll have to convert them on a Mac.
You will need to use a free app called MPEG Streamclip from Squared 5.
Basically, you drag the .mts file into MPEG Streamclip. Then use FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your codec. And it will save out to a .mov file and iMovie will edit this format like there was no tomorrow

Best way to watch a movie with stereo headpho

What is the best experience I can get from watching a movie using standard stereo headphones. I realize I need to test with my ears but I ask because I might need to buy cables. I have the X-fi Platinum with the console. I use a standalone dvd player to watch on my tv. The sound is currently sent to my stereo where I use headphones and was thinking of sending the sound to my X-fi and using the headphones there. Should I use a digital connection for 5. from the dvd player to the X-fi?. Will cmss utilize true 5. signals or will the signal just be wasted. Does cmss only upmix stereo signals?Basically, can I get a decent surround experience while watching a movie with a surround soundtrack on stereo headphones and what is the best way to set that up. My cheap Coby?standalone ?player decodes Dolby and DTS if that matters?Thank youTrenzMessage Edited by trenz on 0-4-20070:53 PM

Hi
both ways would work, and I'm not sure which one to recomend.
Importing image by image wouldn't be so hard, and could give
you the advantage of being able to even ad interactivity like
moving layers or fading them and and and...
Making a flv and a slider is maybe a bit easier (btw i made a
sample some days ago I could provide you with if needs be), but not
as flexible.
Filesize will be an issue, and I guess the flv is bettr in
that respect, but compression might damage the quality, wich might
also be of importance.
Importing all as pngs with trancparencie might lead to other
issues, as discuessed here in a recent thread about pngs (the
number of png that can be stacked one over an other is limeted but
it seems the information about numbers is inconasistent,one of the
programmers of flashplayer talked about 24...)so there might be an
issue there.
But I think ist's a great idea, and it is doable in either
way, maybe it's wise to make sone test with - say 10 layers and
decide then which way to go for the rest.

How to edit a text with same font in a image in photoshop 7

how to edit a text with same font in a image in photoshop 7

Good day!
The question seems to provide insufficient information for a relevant answer.
Do you have the font?
Is the text a (Type) Layer of its own or part of the image?
Could you please post a screenshot with the Layers Panel visible?
Regards,
Pfaffenbichler

How to render mp4 video with 4 audio channels?

How to render mp4 video with 4 audio channels?

Hi Aineaine,
Welcome to Adobe Forums.
Please refer to the below article for multi channel audio.
http://helpx.adobe.com/premiere-pro/using/clips-channels-tracks.html
Thanks

Was watching a movie with AirPlay mirroring on apple tv from iMac. Got a Skype call. Turned off AirPlay on atv and on iMac. Could not hear my Skype caller until I unplugged the atv. What else could I have done?

Was watching a movie with AirPlay mirroring on atv from iMac.   Got a Skype call. Could not hear caller until I unplugged atv. Turned off AirPlay on both atv and iMac. Could not hear Skype caller until I turned off atv. What else could I have done?

I checked and found that the router did not have the latest firmware.   It does now.   The issue is still there.   I did a little research and found that the model number of my Apple TV (MC572LL/A) shows that it is a 2G version which uses the A4 chip.   The latest version uses the A5 chip and is 1080 capable. Both are supposed to be capable of using type "N" routers.   I don't think that should be an issue but I wonder if later updates may have introduced some issues in the 2G version.
I am going to try changing the "N" channel also- just to see if that makes any difference. The istumbler app does not show any "N" networks in my area so it is defaulting to 149.   I will note that even 1 foot away from the router I only get 75-85% for signal.   I would expect it to be 100% since it is so close.   I am also seeing noise go up from typically 13% to 21% when it is on channel 3 and that close.       I will play change locations and channels and see if there is any improvement.

How to separate two contact with same name

Hi, anyone knows how to separate two contacts with same name in Contacts? Actually they are two persons from two gmail contacts with same name but different contact numbers, different emails....etc, but Contacts assume they are same person and merge them as one!

FG,
In Lion, you have the File > Duplicate option. You will then have two copies of your document open, and the one on top will have the temporary filename "OriginalFileName copy", and your next responsibility is to File > Save (or Command-S) and rename the duplicate. At this point, you edit the copy's name, to perhaps ...copy 1, or whatever you wish. The document you had open when you initiated the File > Duplicate will still be there on your screen, waiting for you to Close it or continue editing.
Jerry

How to join two MP4 movies with iMovie '11?

Just after a quick bit of help here. I'm not a movie making enthusiast so never used iMovie before and never will again most likely. However I do have 2 mp4 movies about 4 minutes each that I SIMPLY want to join together.
I've searched and seen reference to dragging the fils into a project then just export as one but for the life of me if import the files I can't seem to find anywhere that provides a view of the two files as thumbnails so I can just drag them to say this one first, this one second. Join please. I seem to get streams and streams of individual frames with sliding lines and what not and the best I seem to be able to get is about 4 seconds at a time. Surely ther MUST be an easy way to just join two movies together without going into advanced frame by frame editing.
It's not the most intuitive piece of software and I don't have any desire to learn it. Problem is I am in a **** of rush with this and at the end of a 14 hour image managament day which is making me less than patient with iMovie.

QuickTime X can join your two files. Edit menu "Add Clip to End..."

Can nolonger watch YouTube movies with my new Safari 2.0.4

I recently went from an eMac with 10.3.9 - Jaguar, to an iMac with 10.4.8 Tiger. My Safari is 2.0.4.
While I was able to watch all YouTube movies, I can nolonger do so. The movie stops about 5 seconds after watching a movie. It behaves as though I already watched the movie.
I did a search to see if I could find similar incidents, and I can see that others may have experienced this problem, but no resolution was ever made.
I run the disk utility almost daily, so there are no permissions that need repairing. I use Foxfire to watch the YouTube movies with no problem, so it appears to be a Safari thing. Not really a 'Safari' thing, more than a Safari 2.0.4 thing - at least it seems that way.
Any help or advice would be appreciated. Thanks.

Yes... that's what I meant! Actually, I cut and pasted that info, so I cut and pasted the wrong info!
EIther way, it did answer my question, so I will mark it as such.
I think that if the others who had the same problem who posted before me will be able to solve their problem as well.

Positions mass move with same position name?

Hi All,
1) Is there any direct way to change Organization of a Position?
We tried performing Mass move between the organizations with the same source and target position names. But we faced the issue - 'The target position already exists outside the target organization' since the same position cannot exist in 2 organizations.
2) We tried a changing the position name to a temporary name and then performed mass move between the orgs from the temporary position to original position. This worked to some extent - The position and the assignments having this position got updated correctly, but the position hierarchy still shows up the Temporary position name.
Is there any solution for our issue 1? or any approach for issue 2?
Application version is 12.1.2.
Many Thanks in advance!

In Oracle HRMS Positions have very strict criteria.
1. They have to be unique within a BG. Hence you cannot have two positions with same name inside one BG even if they are in different Organizations.
2. You cannot change the job or Organization of a position once created.
and so on..
what you are trying to do here violates the basic definition of position in HRMS. You will not be able to change the organization of a position and treat it as the same old position. This is functionally not correct.
In such cases, the best approach is to have a segment for the position KFF holding the short name for the organization it belongs to. Thus whenever you want to change the organization of the position, what you actually do is create a new position, since one of the segment values changes in the position definition.
Coming to the approaches you have tried:
1. Mass move cannot circumvent the basic tenet of HRMS position to allow you create new position with same name but different organization. Hence this approach will not help at all.
2. I am not sure how this happens. But as discussed above changing organization of a position will definitely cause issues somewhere or the other.

How to watch Mp4 Movies With same clarity (HD,1080p,720p) in Ipad3

Similar Messages

Maybe you are looking for