How to web enable NT forms for Unix Environment
We would like to convert our NT forms
to Unix forms and make them web enabled.
We are looking for any UNIX setup information we can find so that we can get started.
We have already installed DEV6i Forms and Reports and it appears the server software went down as well.
WoW the questions.
Where does OAS 4.0.8 fit into the equation?
Do we need to use a JRE on the PC's? Is Jinitiator at the PC's O.K.?
How do you use the unix product Project Builder? -- what launces it? Is it motiff?
Is their any simple documentation for how to web enable forms.
It should be so complex --
Does anyone have a check list of what software should be installed.
Any directions for how how to configure the environment?
we believe we need some sort of checklist for what to do... Can anyone give any help.
You should install Oracle9iAS v1.0.2 on your unix machine. This will have The Forms services configured for you and save you all the manual settings.
Check out the internet deployment section on
http://otn.oracle.com/products/forms
Similar Messages
-
How to Web Enabling the Forms 6i application
Hi,
We are planning to Web enabling the Complete Forms 6i and Reports 6i Application.
Please Advice me with full details how to do this
Thanks
Dorababu KDorabatu,
You can find a lot of doc on OTN
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
Francois -
How to Web enabled my forms?
Hi,
Now i am working in two tier architech. I want to go for 3 tier.
My database server --- Oracle 9i (Separate Sever,Linux)
Forms and Reports execution files are kept into Separate server(Application,linux)
Client side i am installing Runtime enviroment and executing my application.
My request
I want to go for web enable. Please help me in which,what should i want to do.
and where can i get the Forms Server (oracle 9i and Developer suite 6i for this combination which Version Forms Sever is best and i need in Linux based).
KanishYou might want to start here:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
There are some good documents to help you understand what all is needed to take your Forms application from client/server mode to web, particularly this one:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/roadmap.html
Thanks
Shail -
How can i web enable my forms??!!
Hi all technocrats!!
Here i've Oracle Sever version 8.1.7 (webserver) installed on my server. Is it possible to web enable my forms made in Forms version 6?
If possible, how can i make it?
If not, what r the requirements for that?
Plz someone help me
Tnx in advance
RK Rajuhi ,
u may run the forms on unix server where u install ur webserver and run the command f60genm or f60gen mdoule=<<FORM_NAME.fmb>> userid=<<user/pass@db>> -
Web enabling Oracle forms application
Friends,
I am developing an Oracle forms application using 6.0, I need to
web enable this application and this is my first time working
with 6.0, I need advise on how to web enable this application
Thanks
Olutunde
nullTry to go through the oracle developer and oracle developer
server 6.0 reviewers' guide, this is spot on, and has
instructions on how to set all html and environment variables,
set up the OAS or whatever listener you are going to use, and
then just walk through this setup.
Try to get it to run the demo first, and then alter the html to
fit your application.
good luck,
theo
Olutunde Babarinsa (guest) wrote:
: Friends,
: I am developing an Oracle forms application using 6.0, I need
to
: web enable this application and this is my first time working
: with 6.0, I need advise on how to web enable this application
: Thanks
: Olutunde
null -
Display fields when web-enabling 6i form
I am web-enabling a Forms 6i application. All the display fields show up as black when the form is run thru the web. In our client/server version these display fields show up as gray. Why are the colors showing up different when form is run thru the web?
Thanks in advance.
Shellie> They have a default Visual Attribute assigned to them.
Do you mean their Visual Attribute Group property is set to "DEFAULT"?
And you did not answer the first question: What is the background color property assigned to the items? Does it have "<Unspecified>", or is a color assigned?
Assuming your Visual Attribute Group property is set to "DEFAULT" and they have <Unspecified> for background color, then what is the Visual Attribute Group of the canvas they are on? Does the canvas have a Background Color assigned? If not, try setting the background color and report back what happens.
It sounds like you are completely relying on Forms defaults for background, and the default item background on web is black. -
Dear All,
How to web enable B1 so that the transactions can be done from anywhere?
Regards,
NandakumarHi,
please check out SAP Business One E-Commerce and Web CRM
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000700291&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700004470812006E
With this solution you can handle SAP Business One via Internet Explorer from everywhere.
You can access an online Demo here: http://www.businessoneecommerce.com
Kind regards,
Darius -
How can I create a form for users wherein the text field will expand to accommodate additional text?
You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.) -
How to Force enable, silent updates for Adobe flash in windows 8
How to Force enable updates, silently for Adobe flash in windows 8 using group policy?
I have followed this Article:
http://helpx.adobe.com/flash-player/kb/administration-configure-auto-update-notification.h tml
http://gpyall.com/archives/disable-adobe-flash-updates-on-64-bit-windows-with-group-policy /
This looks promising but not working.
Also, I cannot even manually create a file, in Win 8 (C:\Windows\SysWOW64\Macromed\Flash)
So how would group policy can put mms.cfg in this location with following vaule:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
Thanks in Advance.You will find more information in http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_11_7_admin_guide.pdf
-
How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows?
I followed the instructions (which I modified for CS6) in this posting: http://blog.metameister.com/blog/2011/04/08/open-new-file-types-and-add-syntax-highlightin g-in-dreamweaver-cs5-on-window…
but it did not work for CS6.
How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows 7?
cheers
Marvin in EdmontonOk, I figured it out after hunting for a few hours.
Step 1. Add the File Type
In Dreamweaver’s toolbar:
Select Edit > Preferences;
under File Types / Editors, add .jspf to the line “Open in Code View:”.
Step 2. Extensions.txt
Add file type .jspf to the Extensions.txt files. There are two of these files:
C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration
Step 3. MMDocumentTypes.xml
Add jspf to the MMDocumentTypes.xml files. Open this file in Notepad or Text Editor. Do not modify the Dreamweaver configuration files within Dreamweaver.
There are three MMDocumentTypes.xml files to be modified:
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\DocumentTypes
C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\DocumentTypes\
Step 4. Restart Dreamweaver
Hopefully the file type will now be recognized and appear with syntax highlighting. -
How do I enable plug-ins for InDesign CS2 - files won't open
How do I enable plug-ins for InDesign CS2 - files won't open.
I own CS2.
I shouldn't have to buy CS6 InDesign.
How do I open CS 2 files and get the plug ins again.Asking the same question over and over will not change the answer.
-
How can i enable my cookies for only one website?
how can i enable my cookies for only one website?
CShaya wrote:
how can i enable my cookies for only one website?
Safari
There is no preference setting available for that.
Best. -
How do I enable the security for my wireless connection?
How do I enable the security for my wireless connection?
Enter the setup page (192.168.1.1), hit the Wireless Tab, then the Security tab.
-
How to create a Payment Form for access to multiple secure zones
I'm trying to create a Payment Form that allows the user to select from a dropdown of videos, each of which represents a secure zone page with an embedded video.
What I can't figure out -- and tech chat can't help -- is how to redirect the user to the correct secure zone for the video they purchased.
Videos are are streaming, vimeo embeds, not downloads.
Anyone know how to do this? Can post link to test form if you need it.
Thanks!
jerryHi,
This can be done for already available list. Have a look at the following steps:
Create an Empty SharePoint Project, then right click the project, add SharePoint “Layouts” Mapped Folder.
Right click the project name, add New item Application Page, then add the custom code there.
Under Features, add a feature, right click the added feature then add an event receiver, override the FeatureActivated method to set the new edit/new form as the default form.
How to set new form as default form:
SPList lstTest = web.Lists["Shared Documents"];
string newUrl =
string.Format("layouts/NewEditForm.aspx", web.ServerRelativeUrl, lstTest.RootFolder.Url);
var form = web.GetFile(newUrl);
if (form !=
null && form.Exists)
//string newFomrUrl = lstTest.DefaultEditFormUrl.Replace("EditForm.aspx", "docEditForm.aspx");
lstTest.DefaultEditFormUrl = newUrl;
lstTest.Update();
For more information, see
http://community.bamboosolutions.com/blogs/sharepoint-2010/archive/2011/05/12/sharepoint-2010-cookbook-how-to-create-a-customized-list-edit-form-for-development-in-visual-studio-2010.aspx
To add a custom list form, the best way I think is using SharePoint Designer 2010, it’s very fast.
Regards,
Kelly Chen -
How do I enable a site for Contribute users?
I'm sorry if this is a very basic question, but I have been
through the tutorials and much of the help in Contribute 3 and it
all seems to be focused on what to do with an existing, Contribute
enabled site. What I want to do is find out about what comes before
that - how to enable a site for Contribute users. I can't find
anything that explains how to do this. I've also looked through
what I assume are the files used by the Trio Motor Company tutorial
and I can't see anything that marks that out as being a Contribute
enabled site. I'm not even sure whether or not Contribute needs
special programs to be running on the server.
I'm probably missing something.
TIASite/Manage Sites .. select your site and Edit.
Go to the Advanced Site Definition Window. Next to last in
the menu column
is Contribute. Select that and check the check box.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Blim" <[email protected]> wrote in message
news:e5ojj1$ho3$[email protected]..
> I'm sorry if this is a very basic question, but I have
been through the
> tutorials and much of the help in Contribute 3 and it
all seems to be
> focused
> on what to do with an existing, Contribute enabled site.
What I want to do
> is
> find out about what comes before that - how to enable a
site for
> Contribute
> users. I can't find anything that explains how to do
this. I've also
> looked
> through what I assume are the files used by the Trio
Motor Company
> tutorial and
> I can't see anything that marks that out as being a
Contribute enabled
> site.
> I'm not even sure whether or not Contribute needs
special programs to be
> running on the server.
>
> I'm probably missing something.
> TIA
>
Maybe you are looking for
-
Supplier Registration without SUS or XI?
Can I do Supplier (Vendor) Registration without SUS or XI? If not, what are my limitations? I am using SRM server 5.5, and am not using CCM as the supplier directory. I am not using questionnaires. ROS_SELF_REG works. However, I cant notify vendo
-
I purchased two songs on i-tune and when I attempt to down load them, I get an error,"you do not have enough access privilege for this operation.?????
-
Configuring the POS in ECC w/o having any third party tool and SAP IS Retai
Hi All, I would like to know whether is there any way of configuring the POS in ECC without having any third party tool and SAP IS Retail. Becuse client can't efford to invest for the sake of small functionality like just sales and service at his com
-
Cant Listen to CD's on my computer
I am unable to play CD's on my computer using a digital signal. i am running Microsoft Media Player and I am trying to listen to CD's using a Digital signal instead of analog and it sounds like a cat scratched the heck out of my CD when it plays. The
-
What is the proper setup for Gmail on iOS
I have been struggling with this since I made the switch to iPhone in November. I use gmail and would like my emails to be sent from my own domain. Exchange no longer works. Any help is appreciated