How to Web Enabling the Forms 6i application

Hi,
We are planning to Web enabling the Complete Forms 6i and Reports 6i Application.
Please Advice me with full details how to do this
Thanks
Dorababu K

Dorabatu,
You can find a lot of doc on OTN
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
Francois

Similar Messages

How to web enable NT forms for Unix Environment

We would like to convert our NT forms
to Unix forms and make them web enabled.
We are looking for any UNIX setup information we can find so that we can get started.
We have already installed DEV6i Forms and Reports and it appears the server software went down as well.
WoW the questions.
Where does OAS 4.0.8 fit into the equation?
Do we need to use a JRE on the PC's? Is Jinitiator at the PC's O.K.?
How do you use the unix product Project Builder? -- what launces it? Is it motiff?
Is their any simple documentation for how to web enable forms.
It should be so complex --
Does anyone have a check list of what software should be installed.
Any directions for how how to configure the environment?
we believe we need some sort of checklist for what to do... Can anyone give any help.

You should install Oracle9iAS v1.0.2 on your unix machine. This will have The Forms services configured for you and save you all the manual settings.
Check out the internet deployment section on
http://otn.oracle.com/products/forms

How to Web enabled my forms?

Hi,
Now i am working in two tier architech. I want to go for 3 tier.
My database server --- Oracle 9i (Separate Sever,Linux)
Forms and Reports execution files are kept into Separate server(Application,linux)
Client side i am installing Runtime enviroment and executing my application.
My request
I want to go for web enable. Please help me in which,what should i want to do.
and where can i get the Forms Server (oracle 9i and Developer suite 6i for this combination which Version Forms Sever is best and i need in Linux based).
Kanish

You might want to start here:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
There are some good documents to help you understand what all is needed to take your Forms application from client/server mode to web, particularly this one:
http://www.oracle.com/technology/products/forms/htdocs/upgrade/roadmap.html
Thanks
Shail

Display fields when web-enabling 6i form

I am web-enabling a Forms 6i application. All the display fields show up as black when the form is run thru the web. In our client/server version these display fields show up as gray. Why are the colors showing up different when form is run thru the web?
Thanks in advance.
Shellie

> They have a default Visual Attribute assigned to them.
Do you mean their Visual Attribute Group property is set to "DEFAULT"?
And you did not answer the first question: What is the background color property assigned to the items? Does it have "<Unspecified>", or is a color assigned?
Assuming your Visual Attribute Group property is set to "DEFAULT" and they have <Unspecified> for background color, then what is the Visual Attribute Group of the canvas they are on? Does the canvas have a Background Color assigned? If not, try setting the background color and report back what happens.
It sounds like you are completely relying on Forms defaults for background, and the default item background on web is black.

Web enabling Oracle forms application

Friends,
I am developing an Oracle forms application using 6.0, I need to
web enable this application and this is my first time working
with 6.0, I need advise on how to web enable this application
Thanks
Olutunde
null

Try to go through the oracle developer and oracle developer
server 6.0 reviewers' guide, this is spot on, and has
instructions on how to set all html and environment variables,
set up the OAS or whatever listener you are going to use, and
then just walk through this setup.
Try to get it to run the demo first, and then alter the html to
fit your application.
good luck,
theo
Olutunde Babarinsa (guest) wrote:
: Friends,
: I am developing an Oracle forms application using 6.0, I need
to
: web enable this application and this is my first time working
: with 6.0, I need advise on how to web enable this application
: Thanks
: Olutunde
null

How can i web enable my forms??!!

Hi all technocrats!!
Here i've Oracle Sever version 8.1.7 (webserver) installed on my server. Is it possible to web enable my forms made in Forms version 6?
If possible, how can i make it?
If not, what r the requirements for that?
Plz someone help me
Tnx in advance
RK Raju

hi ,
u may run the forms on unix server where u install ur webserver and run the command f60genm or f60gen mdoule=<<FORM_NAME.fmb>> userid=<<user/pass@db>>

HT202643 Java for OS X 2014-001: How to re-enable the Apple-provided Java SE 6 web plug-in

Sorry guys I'm new in regards to this article: Java for OS X 2014-001: How to re-enable the Apple-provided Java SE 6 web plug-in and Web Start features - Apple Support I just would like to know if I after entering the commands do I just quit out of Terminal or do I need to save and then quit? Also how can I check that the the correct Java that came with Yosemite is now working?
Thanks!

Just quit Terminal. The OS doesn't come with Java installed anymore, you have to download it.
Java Test

I am new to working with pdf. I am trying to fill out a form that was attached to a web site. I have a Macbook Pro. I am just learning Acrobat. How do I get the form to accept input?

I am new to working with pdf. I am trying to fill out a form that was attached to a website. I have a Macbook Pro and I am trying to learn Acrobat. How do I get the form to accept my input?

If there are Acrobat PDF form fields, not jus a space for a form field, then you will have to add them. It would be better to ask the provider of the form to add the fields. If you cannot add the fields, then you can use the add text feature.
Have you looked in the "Tools" panel for the "Forms" category?
Try Acrobat Users Community Tutorials , http://acrobatusers.com/tutorials.
See Adobe TV - Acrobat, http://tv.adobe.com/channel/how-to/acrobat-xi-tutorials/.

How to web enable B1

Dear All,
How to web enable B1 so that the transactions can be done from anywhere?
Regards,
Nandakumar

Hi,
please check out SAP Business One E-Commerce and Web CRM
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000700291&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700004470812006E
With this solution you can handle SAP Business One via Internet Explorer from everywhere.
You can access an online Demo here: http://www.businessoneecommerce.com
Kind regards,
Darius

How do I reorder the form results from a non-BC form in Muse?

I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
How do I ensure the form results emails maintain the order of the fields in the form?
For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
Many thanks,
Len Williams
727-466-6888

I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
How do I ensure the form results emails maintain the order of the fields in the form?
For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
Many thanks,
Len Williams
727-466-6888

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How many web.xml in a java application

Hi,
can anyone give tell the answer for this question "How many web.xml in a java application?"

1Why ?Because the Web container refers to only one web.xml for one web application.
I havent heard of an application having more than 1 web.xml
How?It reads all the definitions of servlet mappings, filters, welcome-file etc from this file itself.
Where?From the following folder ...
/WEB-INF
By the way ..... the way you questioned me was amuzing ... Why? How ?Where ? Its funny :D
I actually wanted to reply as below ..
Why ?Why not
How?
Wait lemme think ....ummm... What do you mean how??
Where ?
Inside the web ;-)
-Rohit

How do I enable the Java Accessibilty Stuff?

Hi. I'm trying to make my application accessible via a screen reader to impaired users. Unfortunately, I'm not having any success whatsoever. If I didnt know Java had accessibility stuff built-in, I would assume that it was just not compatible at all with screen reader technology.
How do I enable the Java accessibility stuff so that UI components are accessible to a screen reader; they can be iterated over and get sensible names and/or descriptions of them?
I wrote a simple application, attached below, which just makes a demo UI from which I can start learning the basics of the accessibility stuff. Out of the box, the UI is completely opaque to a screen reader (I'm using the VoiceOver utility bundled with Mac OS X, which does ok with normal applications).
I tried setting things focusable to no avail, voice over cant cycle through the UI component using the normal keyboard short cuts, and nothing is spoken when I tab between components, despite some things having natural labels, like a menu, and some things, like the button, where i've set the accessible name and description on the accessible context of the component.
Obviously, I'm doing something wrong or I just don't understand how the accessibility stuff works.
Could someone please shed some light on this so that I can make my application accessible to a screen reader?
Thanks.
    private static void try508Example() {
        JFrame aFrame = new JFrame();
        JMenuBar aMenuBar = new JMenuBar();
        JMenu aMenu = new JMenu("Test");
        aMenu.setMnemonic(KeyEvent.VK_T);
        JMenuItem aItem1 = new JMenuItem("Test Item 1");
        aItem1.setFocusable(true);
        aItem1.getAccessibleContext().setAccessibleName("Test Item 1");
        aItem1.getAccessibleContext().setAccessibleDescription("Test Item 1 Description");
        JMenuItem aItem2 = new JMenuItem("Test Item 2");
        JMenuItem aItem3 = new JMenuItem("Test Item 3");
        aMenu.add(aItem1);
        aMenu.add(aItem2);
        aMenu.add(aItem3);
        aMenuBar.add(aMenu);
        aFrame.setJMenuBar(aMenuBar);
        JTabbedPane aTabPanel = new JTabbedPane();
        aTabPanel.setFocusable(true);
        JTextArea aTab1Comp = new JTextArea();
        JScrollPane aTab2Comp = new JScrollPane(new JTree());
        aTabPanel.addTab("Tab1", aTab1Comp);
        aTabPanel.addTab("Tab2", aTab2Comp);
        JTree aTree = new JTree();
        aTree.setFocusable(true);
        JLabel aLabel = new JLabel("some label");
        aLabel.setLabelFor(aTree);
        aLabel.setFocusable(true);
        JScrollPane aScrollList = new JScrollPane(new JList());
        aScrollList.setFocusable(true);
        JButton aBtn = new JButton("Button");
        aBtn.setFocusable(true);
        aBtn.getAccessibleContext().setAccessibleName("Button Name");
        aBtn.getAccessibleContext().setAccessibleDescription("Button Description");
        JPanel aContent = new JPanel(new BorderLayout());
        aContent.add(aTabPanel);
        aContent.add(aBtn, BorderLayout.NORTH);
        aContent.add(aScrollList, BorderLayout.EAST);
        aContent.add(aTree, BorderLayout.WEST);
        aContent.add(aLabel, BorderLayout.SOUTH);
        aFrame.setContentPane(aContent);
        aFrame.setSize(640, 480);
        aFrame.setVisible(true);
        aFrame.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
    }

Ok, so a very curious issue. If I comment out adding the menu bar to the window, ie comment out this line:
aFrame.setJMenuBar(aMenuBar);
The screen reader reads me back everything just like I would expect. I comment the line back in, and nothing, the application is completely invisible to the screen reader.
Anyone have any idea what this is about?

How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

lunagirl wrote:
The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61. Add/Remove programs has only these pre-installed apps:
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Is the activation assistant one of them?
No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
Rgds,
Ahti

I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

Edit > Preferences. Select the check box for Ringtones, this will add them to the listing in iTunes.
Not sure that really answers your question though.

How to Web Enabling the Forms 6i application

Similar Messages

Maybe you are looking for