How to wifi-enable an entire condominium block?

Good day all.
I'd be grateful if someone points me in the right direction here. I need to wire up, or rather, wifi'ize an entire condominium block, 12 floors, with a total of 72 units across all 12 floors.
What would be the best way to do this? What routers or access points do I need?
Internet would be provided by means of an ADSL modem via ethernet.
TIA.

Well for one, the ADSL is going to be your outbound connection, so you will need a switch that can supply PoE to the AP's you choose. 12 floors, so 6 units per floor.... You can get away with 2 ap's per floor to be on the safe side. Now you have to decide how will you mount the ap's.... on the ceiling, wall or mount above the ceiling. the 1242's can give you both 802.11b/g and 802.11a. You can also get those with just 802.11b/g. These do require external antennas. The 1131 looks kind of like a smoke detector and has built-in antenaas. These also have both 802.11b/g and 802.11a radios. Depending on the distance for each run. you might need to have 2 24-port PoE switches. One to cover floors 1-6 and the other to cover floors 7-12. The adsl can be connected to the one that covers floors 1-6 since most likeley this will be next to the adsl modem. the two switches will be connected via copper or fiber.
Now if you go with LWAPP or autonomous ap's is up to you. Here is a link you can browse different products.
http://www.cisco.com/en/US/products/hw/wireless/index.html#~acc~enterprise_wireless

Similar Messages

  • How do I enable pop-ups which blocked in my firefox 6.0.2 even after putting in exceptions or Block Pop-up widow is unchecked.

    I have tried both the options :
    1. First I blocked Pop-ups at Tools->Options->Content-> Block Pop-up window by checking it and then entering Exceptions.
    2. I unchecked Pop-up window to allow the pop-ups at all times.
    I checked the results after restarting the Firefox browser, not only once but many a times ( over a period of time).
    My Firefox does not allow Pop-ups. I am unable to use this browser for many a sites.
    Now the browser does not remember the previous session and I need to open all the tabs manually, one by one each time I close and reopen the browser.

    Yes all that happened to me [but on FB as I rarely use twitter] . It was browser hijacking. I even commented about it on FB but no one saw the images except me.

  • How to transfer/enable my entire itunes library on new iMac? Purchased also

    Songs from cds, songs i have downloaded from other suppliers & all my purchases from itunes store.
    Now i have searched for the answers already but havents found clear answers which make me think i can manage it or do it myself.
    I do not want to lose everything or even part of it. I have tried authorising my itunes library on other computers but in the case of my pc laptop, only 1 episode of a tv series came up when there where at least 2 or 3 entire seasons of other tv series purchased.
    So whats the most straightfoward way. Also will be looking to transfer pics & video clips from my camera etc. Should i buy a firewire & can it be used for transfering my itunes purchases also???

    OK. First you need to de-authorize the old computer: About iTunes Store authorization and deauthorization.
    Next you need to copy your Music folder and some preference files to an external drive:
    /Home/Music/ folder
    /Home/Library/Preferences/ folder: transfer these preference files:
    com.apple.iTunes.app.plist
    com.apple.iTunes.eq.plist
    com.apple.iTunes.plist
    com.apple.iTunesHelper.plist
    Once you transfer all this to the new computer you will need to authorize the new computer per instructions in the above link.
    If you don't have an external drive, then you can perform the transfers via Target Disk Mode:
    Boot your old computer into TDM. After the TDM logo appears boot the new computer normally. Your old computer's hard drive should appear on the new computer's Desktop. You can then transfer the files by drag and drop.

  • Enable / Disable selection screen block

    Hi, could u pls tell me how do I enable/disable selection screen block written below based on radio button selected??
    Block to be enabled / disabled :
    *----APO Version and RFC destination block
    SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-013.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 01(20) text-e11.    "APO Planning Version
    SELECTION-SCREEN POSITION 29.
    SELECT-OPTIONS s_apover FOR w_version NO INTERVALS.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 01(20) text-e09.    "APO RFC Destination
    SELECTION-SCREEN POSITION 32.
    PARAMETERS  :  p_aporfc LIKE rfcdes-rfcdest.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK b4.
    Radiobuttons :
    Material Type
    SELECTION-SCREEN BEGIN OF BLOCK ss04 WITH FRAME TITLE text-072       .
    PARAMETERS :
         Load only FERTs
           p_FERT  RADIOBUTTON GROUP styp DEFAULT  'X' USER-COMMAND rusr ,
         Load ROH/HALBs
           p_HALB  RADIOBUTTON GROUP styp                                .
    SELECTION-SCREEN END   OF BLOCK ss04                                 .
    Thanx in advance

    Hi
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
    pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
    pa_vkorg TYPE vbak-vkorg MODIF ID abc.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
    SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
    s_date FOR gs_lfa1-erdat MODIF ID def,
    s_augru FOR gs_vbak-augru MODIF ID def,
    s_vbeln FOR gs_vbak-vbeln MODIF ID def.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
    SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
    SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK b3.
    IF pa_rep EQ gc_x.
    LOOP AT SCREEN.
    IF screen-group1 = gc_abc.
    screen-input = gc_zero_num.
    ELSEIF screen-group1 = gc_def.
    screen-active = gc_one_num.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    ELSEIF pa_upd EQ gc_x.
    *For Reprocessing
    LOOP AT SCREEN.
    IF screen-group1 = gc_def.
    screen-input = gc_zero_num.
    ELSEIF screen-group1 = gc_abc.
    screen-active = gc_one_num.
    ENDIF.
    MODIFY SCREEN.
    CLEAR pa_upd.
    ENDLOOP.
    ENDIF.
    REPORT zrich_001.
    PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
                            user-command chk,
                p_rad2 RADIOBUTTON GROUP grp1.
    SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
                    s_datum2 FOR sy-datum MODIF ID d2.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF p_rad1 = 'X'
          AND screen-group1 = 'D2'.
          screen-active = '0'.
        ENDIF.
        IF p_rad2 = 'X'
         AND screen-group1 = 'D1'.
          screen-active = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    Regards
    Anji

  • Late 2012 i7 iMac not waking up and also finding wifi enabled after I turned it off as I use ethernet

    I have a late 2012 i7 3.4 imac with 32 GB ram.  I am finding a perplexing issue and I hope someone may help me out.  I am blessed with the inability to wake my mac up after an overnight sleep intermittently must push power off and then turn on again to reboot.  I noticed since this started that the imac wifi is always turned on when I restart .  i connect via Ethernet (FIOS).  The wifi connection is a extension of my FIOS router wifi.  Will there be any problems with wifi on along with Ethernet connection?  The only software I have on my mac that shows it can work with either connection is CrashPlan. 
    I have no idea how the wifi enables itself as I do not activate it and the icon in the upper taskbar is an empty triangle usually.  This am it was a triangle filled with black lines and when I checked it was enabled.   Any suggestions or tips would be greatly appreciated.  Thank you.

    Michael Allbritton wrote:
    Yes, folks have gotten refunds even though the TOS says all sales are final. You'll need to contact iTunes Store support and politely make your case that you're just not satisfied with the service.
    I've got kind of a radical suggestion, if you want to try it. In cases like you describe a full OS restore, then setting the iPhone up as a new device can fix all these little glitches. It is a lot of trouble, I know, but if you do want to use the service this is one method that should clear it all up for you.
    Thank you, it's good to know that Apple does offer refunds.  I want it to work, if it does what I would like the $25 would be more than worth it.
    I thought clearing my music and starting up iTunes Match with an empty music library might do the equivalent of a full reset... I can't say I really feel like doing that, and I'm skeptical it would clear up all of the issues I've had (play counts, play lists, album art, data usage when I told it to bloody well not use the data).
    Thanks for the input!

  • Facetime block in Saudi Arabia. How would I enable it in a country where it is not blocked?

    HI,
    I recently purchased iPad mini Retina Display(4G). There is no Facetime included in the Pre-installed Apple apps because Facetime is blocked in Saudi Arabia. If i moved to another country, (Where Facetime is not blocked) how would i enable Facetime on my device as its not a stand alone app?
    Thanks

    You cannot activate FaceTime. It is permanently disabled on any device purchased in SA. You cannot reverse that even if you leave the country.

  • My 4s wifi function is greyed out, how do i enable it

    my 4s wifi function is greyed out, how do i enable it

    Try the steps in the article below:
    http://support.apple.com/kb/ts1559

  • How can I enable blocked flash plugin on firefox?

    A couple of days ago, my computer (mac OS X 10.4.11 PPC) suddenly seemed to stop recognizing that I had flash installed and wouldn't play anything requiring flash - instead a message came telling me to install it.
    I uninstalled flash and the installed the latest version for my computer from the adobe website (which is 10.1.102.64).
    Computer still thinks flash isn't installed and when I checked plugins I discovered firefox has blocked it telling me the version of flash I want to use is too old (even though the version I've downloaded is the latest I can use with my computer).
    How can I enable the plugin on firefox so I can use flash? The 'enable' button on the plugin has been greyed out so I can't press it.
    Please help - I'm rubbish with computers so please give any advice in very simple language! ( i have firefox 3.0.4)

    hello this should not have happened - mozilla recently uses the blocklist feature to notify users about the outdated flash plugin but not block it.
    you'd have to trigger a manual update of the blocklist and hope that this time the correct version is retrieved.
    go to tools > web-developers > error console & copy the following line into the code field & hit evaluate:
    ''Components.classes['@mozilla.org/extensions/blocklist;1'].getService(Components.interfaces.nsITimerCallback).notify(null);''
    sorry for the computer gibberish. afterwards restart the browser & see if you can enable the plugin in the addons manager again.

  • MetaStream 3 plugin 3.2.2.2.26 is blocking access to material needed. how do I enable

    In Propertyware software, this MetaStream 3 Plugin 3.2.2.26 is blocking usage on four areas of the software. How do I enable this. On my partners new computer, a Gateway, there is no problem accessing the same areas.

    In php.ini look for extension_dir, make sure it points to somewhere that exists and then further down you will see Dynamic Modules set out a little like this...
    ;extension=php_gd2.dll (Windows)
    For installation (Quote from PHP Manual)...
    To enable GD-support configure PHP --with-gd[=DIR], where DIR is the GD base install directory. To use the recommended bundled version of the GD library (which was first bundled in PHP 4.3.0), use the configure option --with-gd. GD library requires libpng and libjpeg to compile.
    In Windows, you'll include the GD2 DLL php_gd2.dll as an extension in php.ini. The GD1 DLL php_gd.dll was removed in PHP 4.3.2. Also note that the preferred truecolor image functions, such as imagecreatetruecolor(), require GD2.

  • HT4437 How to air play with out Apple TV to my HDTV wifi enable

    I don't have Apple TV, it's possible to connect my iPad to my
    Wifi enabled HDTV ?
    Pls let me know

    Only if that TV supports airplay.

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • How do i enable my iphone with out itunes

    how do i enable my iphone with out itunes how do i enable my iphone with out itunes

    You need a WiFi connection to activate the iPhone without itunes on a mac/pc.

  • My iPad 2 is disabled. I know the passcode and apple id. How do I enable it?

    My iPad 2 16Gb has been disabled because the wrong passcode was entered too many times. Since purchasing the iPad I never purchased anything from the Apple Store and after a couple years my passcode got misplaced.
    A friend of mine in the church where I attend tried to help me and went to iTunes, erased the iPad and downloaded the new software. When it was time to activate the iPad, it demanded my apple id and original passcode at the time of purchase.
    I searched and found it in my wallet but the last three characters were uncertain. The salesman used an "up-arrow r" for "R" and counted it as two characters; so the passcode only had 7 characters instead of 8. I thought the up-arrow was a "p" and it could have been capital or common. Then the "r" might have been a "k" because the way I wrote it. After many combinations, I ran out of tries and the iPad was disabled. Eventually I realized it was a "R" but too late.
    I visited the Apple Support in my country and they were unable to do anything about it even though I had the right apple id and passcode. The security questions were the problem.
    The first security question was my birth date and I was getting that wrong. Why, I don't know. How could I get that wrong. Not even my wife's birth date works. I began to question whether the salesman went through any security questions with us at all.
    How do I enable the iPad knowing my apple id and passcode at the time of purchase?

    You're facing Find My iPhone Activation Lock, and you will not be able to use you're iPad without knowing the Apple ID and Password used to originally activate it. If you don't remember your password, try: https://iforgot.apple.com/password/verify/appleid

  • How do I get my entire photo stream to my new iPad. I use my ICloud and some of them showed up but most if them did not. I am trying to sync the photos from my phone to an iPad 1 and iPad mini.

    How do I get my entire photo stream to my new iPad. I use my ICloud and some of them showed up but most if them did not. I am trying to sync the photos from my phone to an iPad 1 and iPad mini.

    Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
    The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

  • How do I enable the passbook app in ios 6.  Nothing happens when I click on it.

    how do I enable the passbook app in ios 6?  Nothing happens when I click on it.

    Yes, you do need an antivirus app for iOS. However, they don't currently exist because Apple refuses to make their 'proprietary' technical OS specifics freely available as open source code or to any Antivirus companies, who could examine and potentially identify security holes. Many security problems have been identified by Apple and fixed as part of iOS updates in the past (details are readily available in the iOS update information) and this will likely be a bigger problem in the future as malware authors move toward the technology leader as a target. But right now you can't get an antivirus app for iOS which scans the iOS device wholesale. This is despite the fact that (legitimate) apps are available which can take control of the entire device, install apps, wipe them or the device, view information, etc (for example Sophos Mobile Control). SMC can be installed by tapping an email link to a website and then tapping 'OK' to a couple of dialogues.

Maybe you are looking for